StarTech.com USB2SLSATINT Manual


Læs nedenfor 📖 manual på dansk for StarTech.com USB2SLSATINT (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
1 xUSB2SLSATINT adapter•
2 x Mounting screws•
1 x Installation Guide•
Slimline SATA optical drive•
SP4 power connector on power supply•
USB enabled computer system with available connector•
USB enabled operating system•
Bus Interface USB 2.0
Chipset ID Jmicron JM20329
Connectors
1 x Slimline SATA
1 x SP4 floppy power
1 x 5-pin USB header
Maximum Data Transfer
Rate USB 2.0: 480Mbps
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Storage Temperature -20°C ~ 60°C (-4°F ~ 14F)
Humidity 0 ~ 75% RH
Dimensions (LxWxH) 102.28mm x 25.0mm x
12.14mm
Weight 25g
Connect the Slimline SATA connector on the 1.
USB2SLSATINT adapter to the connector on the
Slimline SATA optical drive.
Fasten the adapter board to the optical drive using the 2.
two included mounting screws.
Mount the assembled optical drive into the computer 3.
system. If the system does not have a slim optical
drive bay, a mounting bracket may be necessary (i.e.
StarTech.com ID: SLIMCDFDCAGE for 5.25” bays).
Connect a 5-pin USB header cable (not included) from 4.
the adapter board to an available USB connector/
header on the computer system, using an appropriate
cable or adapter (i.e. StarTech.com ID: USBINT5PIN).
Connect an SP4 floppy power connector from the 5.
system power supply to the SP4 connector on the
adapter.
5-pin USB header
SP4 floppy power
connector
Slimline SATA connector
Mounting Point Mounting Point


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: USB2SLSATINT

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com USB2SLSATINT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret StarTech.com Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024