Sun Joe BDL-A0053 Manual
Læs nedenfor 📖 manual på dansk for Sun Joe BDL-A0053 (48 sider) i kategorien Sav. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/48
© 2022 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-HCS-LTE-P1 Form No. SJ-24V-HCS-LTE-P1-880E-M
R
CORDLESS PRUNING SAW
24V MAX* | 2.0 Ah | 5-INCH
1
EN
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re
and/or serious injury. Save all warnings and instructions for
future reference.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless prunning saw was designed and manufactured
for trimming and pruning tree limbs and branches and for
cutting smaller logs up to recommended 4.5 inch
(11.4 cm), not to exceed a max. cut of 5.5 in. (14 cm) in
diameter depending on type of wood. All of the wooden
objects intended to be cut with this pruning saw should be no
thicker than the guide bar's maximum cutting capabilities.
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Improper use of the machine
will invalidate the warranty, relieve the manufacturer from all
liabilities. The user will consequently be liable for all and any
damage or injury to himself/herself or others.
General Power Tool Safety
Warnings
mWARNING! Read all safety warnings, instructions,
illustrations and specications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electric Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools – Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts
– Damaged or entangled cords increase the risk of electric
shock
4. When operating a power tool outdoors, use an
extension cord suitable for outdoor use – Use of a cord
suitable for outdoor use reduces the risk of electric shock.
5. If operating a power tool in a damp location is
unavoidable, use a RESIDUAL CURRENT DEVICE
(RCD) protected supply – Use of an RCD reduces the
risk of electric shock
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use personal protective equipment. Always wear
eye protection – Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is
in the o-position before connecting battery pack,
Produkt Specifikationer
| Mærke: | Sun Joe |
| Kategori: | Sav |
| Model: | BDL-A0053 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sun Joe BDL-A0053 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Sav Sun Joe Manualer
14 November 2024
1 Januar 2024
24 December 2023
24 December 2023
16 December 2023
22 November 2023
26 August 2023
22 August 2023
5 August 2023
1 August 2023
Sav Manualer
- Sav Scheppach
- Sav Bosch
- Sav Ozito
- Sav Guede
- Sav Stiga
- Sav Panasonic
- Sav Metabo
- Sav Martha Stewart
- Sav DeWalt
- Sav Husqvarna
- Sav RYOBI
- Sav Silverline
- Sav Skil
- Sav Mafell
- Sav AEG
- Sav Gardena
- Sav AL-KO
- Sav Zipper
- Sav Stihl
- Sav McCulloch
- Sav Makita
- Sav Worx
- Sav Dolmar
- Sav Garden
- Sav Güde
- Sav Biltema
- Sav Jonsered
- Sav Vonroc
- Sav Hyundai
- Sav Milwaukee
- Sav Parkside
- Sav Black And Decker
- Sav FERM
- Sav Trotec
- Sav Einhell
- Sav Proxxon
- Sav Stanley
- Sav Hikoki
- Sav Hilti
- Sav Hitachi
- Sav Kress
- Sav Remington
- Sav Park & Garden
- Sav Elu
- Sav Festool
- Sav Echo
- Sav EGO
- Sav Partner
- Sav Powerworks
- Sav Texas
- Sav Dremel
- Sav Kinzo
- Sav Powerfix
- Sav Elektra Beckum
- Sav Ford
- Sav Craftsman
- Sav Powerplus
- Sav Gamma
- Sav Westfalia
- Sav Genesis
- Sav Pattfield
- Sav Fieldmann
- Sav Cobra
- Sav Spear & Jackson
- Sav Porter-Cable
- Sav Baumr-AG
- Sav BabyGO
- Sav Ridgid
- Sav Cotech
- Sav Snow Joe
- Sav Hobart
- Sav Royal Catering
- Sav Yard Force
- Sav Evolution
- Sav Ferrex
- Sav Fuxtec
- Sav RIKON
- Sav Extralink
- Sav Cocraft
- Sav Maestro
- Sav Yellow Garden Line
- Sav Wolfcraft
- Sav Mac Tools
- Sav Workzone
- Sav Tryton
- Sav Varo
- Sav Batavia
- Sav Protool
- Sav Stalco
- Sav Triton
- Sav Lux Tools
- Sav Anova
- Sav Fleurelle
- Sav Dual Saw
- Sav Toolson
- Sav Dexter Power
- Sav Toledo
- Sav Graule
- Sav Exakt
- Sav Mac Allister
- Sav MSW
- Sav Prowork
Nyeste Sav Manualer
23 November 2024
22 November 2024
17 November 2024
17 November 2024
16 November 2024
15 November 2024
15 November 2024
3 November 2024
22 Oktober 2024
20 Oktober 2024