Sun Joe ION100V-10PS-CT Manual

Sun Joe Sav ION100V-10PS-CT

Læs nedenfor 📖 manual på dansk for Sun Joe ION100V-10PS-CT (80 sider) i kategorien Sav. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/80
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model iON100V-10PS-CT Form No. SJ-iON100V-10PS-CT-880E-MR1
CORDLESS POLE CHAIN SAW
CORE TOOL
100-VOLT MAX* | 10-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
General Safety
mWARNING! When using cordless yard tools, basic safety
precautions should always be followed to reduce the risk of re,
electric shock and personal injury, including the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Keep work area clean and well-litClear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footware and close-tting clothing is
recommended when working outdoors with power tools.
9. Wear protective hair coverings to contain long hair.
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
12. Do not overreach Keep proper footing and balance
at all times.
13. Maintain tools with careKeep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn o the power switch and remove
the battery when it is not in use, before servicing, when
transporting or when changing the chain or
other accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety button and the On/O switch are in the OFF
position before inserting the battery in the unit. Do not
carry the pole chain saw with the safety button and the
On/O switch engaged.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may aect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF by removing the battery from the unit.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Avoid unintentional starting – Do not carry the pole
chain saw with your nger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure
to encase the cutting bar in its protective sheath when
not in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.


Produkt Specifikationer

Mærke: Sun Joe
Kategori: Sav
Model: ION100V-10PS-CT

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe ION100V-10PS-CT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Sav Sun Joe Manualer

Sav Manualer

Nyeste Sav Manualer

Einhell

Einhell BG-PC 1235 Manual

22 November 2024
EGO

EGO CS2005E Manual

17 November 2024
EGO

EGO CS1411E Manual

17 November 2024
Mafell

Mafell K 65 18M bl Manual

16 November 2024
Powerplus

Powerplus POWX53300T Manual

22 Oktober 2024
MSW

MSW -TCM800 Manual

20 Oktober 2024