Supermicro SuperServer 2028TP-HC1R-SIOM Manual

Supermicro Server SuperServer 2028TP-HC1R-SIOM

Læs nedenfor 📖 manual på dansk for Supermicro SuperServer 2028TP-HC1R-SIOM (142 sider) i kategorien Server. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/142
USER'S MANUAL
Revision 1.0a
SUPERSERVER®
2028TP-HTR-SIOM
2028TP-HC0R-SIOM
2028TP-HC1R-SIOM
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
2028TP-HTR/HC0R/HC1R-SIOM. Installation and maintenance should be
performed by experienced technicians only.
The SuperServer 2028TP-HTR/HC0R/HC1R-SIOM is a high-end server based
on the SC217HQ+-R2K04BP2 2U rackmount chassis and the dual processor
X10DRT-PS serverboard. All models have four serverboard nodes with six hot-swap
Hard Disk Drives (HDD) each per node.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X10DRT-PS serverboard and
the SC217HQ+-R2K04BP2 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
2028TP-HTR/HC0R/HC1R-SIOM into a rack and check out the server conguration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2028TP-HTR/HC0R/HC1R-SIOM.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRT-PS serverboard, including
the locations and functions of connections, headers and jumpers. Refer to
this chapter when adding or removing processors or main memory and when
reconguring the serverboard.
v
SUPERSERVER 2028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
Notes
vii
Locking Tabs ................................................................................................... 2-5
Releasing the Inner Rail ................................................................................. 2-5
Installing The Inner Rails on the Chassis ....................................................... 2-6
Installing the Outer Rails on the Rack ............................................................ 2-7
Standard Chassis Installation ......................................................................... 2-8
Chapter 3 System Interface
3-1 Overview ......................................................................................................... 3-1
3-2 Control Panel Button ....................................................................................... 3-2
Power 3-2 ..............................................................................................................
UID 3-2 ..................................................................................................................
3-3 Control Panel LEDs ........................................................................................ 3-2
Alert 3-2 .................................................................................................................
NIC 3-3 ..................................................................................................................
3-4 Hard Drive Carrier LEDs ................................................................................. 3-3
Chapter 4 Standardized Warning Statements for AC Systems
4-1 About Standardized Warning Statements ....................................................... 4-1
Warning Denition ........................................................................................... 4-1
Installation Instructions .................................................................................... 4-4
Circuit Breaker ................................................................................................ 4-5
Power Disconnection Warning ........................................................................ 4-6
Equipment Installation ..................................................................................... 4-8
Restricted Area ................................................................................................ 4-9
Battery Handling ............................................................................................ 4-10
Redundant Power Supplies .......................................................................... 4-12
Backplane Voltage ........................................................................................ 4-13
Comply with Local and National Electrical Codes ........................................ 4-14
Product Disposal ........................................................................................... 4-15
Hot Swap Fan Warning ................................................................................. 4-16
Power Cable and AC Adapter ...................................................................... 4-18
Chapter 5 Advanced Serverboard Setup
5-1 Handling the Serverboard ............................................................................... 5-1
Precautions 5-1 .....................................................................................................
Unpacking 5-1 .......................................................................................................
5-2 Connecting Cables .......................................................................................... 5-2
Connecting Data Cables ................................................................................. 5-2
5-3 Rear I/O Ports ................................................................................................. 5-3
5-4 Processor and Heatsink Installation................................................................ 5-4
Installing a Passive CPU Heatsink ................................................................. 5-7
Removing the Heatsink ................................................................................... 5-8
Table of Contents
Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer
2028TP-HTR/HC0R/HC1R-SIOM up and running. Following these steps in the order
given should enable you to have the system operational within a minimum amount
of time. This quick setup assumes that your system has come to you with the
processors and memory preinstalled. If your system is not already fully integrated
with a serverboard, processors, system memory etc., please turn to the chapter or
section noted in each step for details on installing specic components.
2-2 Unpacking the System
You should inspect the box the 2028TP-HTR/HC0R/HC1R-SIOM server was
shipped in and note if it was damaged in any way. If the server itself shows damage
you should le a damage claim with the carrier who delivered it.
Dec i de on a s uitable locatio n for the rac k unit that wi ll hold the
2028TP-HTR/HC0R/HC1R-SIOM server. It should be situated in a clean, dust-
free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic elds are generated. You will also need it placed near a grounded
power outlet. Read the Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The box the SuperServer 2028TP-HTR/HC0R/HC1R-SIOM was shipped in should
include two sets of rail assemblies, two rail mounting brackets and the mounting
screws you will need to install the system into the rack. Follow the steps in the
order given to complete the installation process in a minimum amount of time.
Please read this section in its entirety before you begin the installation procedure
outlined in the sections that follow.
SUPERSERVER 2028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
3-4
Notes


Produkt Specifikationer

Mærke: Supermicro
Kategori: Server
Model: SuperServer 2028TP-HC1R-SIOM

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro SuperServer 2028TP-HC1R-SIOM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Server Supermicro Manualer

Server Manualer

Nyeste Server Manualer

MSI

MSI S2206-02 Manual

9 Marts 2025
MSI

MSI S1205-01 Manual

9 Marts 2025
MSI

MSI S2206 Manual

9 Marts 2025
IoSafe

IoSafe 224+ Manual

23 Januar 2025
IoSafe

IoSafe 1520+ Manual

23 Januar 2025
IoSafe

IoSafe 218 Manual

23 Januar 2025
IoSafe

IoSafe 1019+ Manual

23 Januar 2025
IoSafe

IoSafe 1515+ Manual

23 Januar 2025
MSI

MSI D1505 Manual

19 Januar 2025
MSI

MSI D3052 Manual

14 Januar 2025