Swann ADS-466 Manual

Swann Overvågningskamera ADS-466

Læs nedenfor 📖 manual på dansk for Swann ADS-466 (4 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

123

456

789

CConnecting the Camera DNetwork LAN Connection (optional)

QSH_466CAM200214E | © Swann 2014

AGetting to know your Camera EN

Congratulations on the purchase of your SwannCloud camera. This quick start guide will assist you on

getting your camera up and running as soon as possible. We recommend that you connect everything and

give it a try before you do a permanent installation, to make sure nothing was damaged during shipping.

A) IR (Infrared) LEDs -

The camera will use

these in low-light conditions to generate

a black and white image, even in total

darkness.

B) Light Sensor - Detects the amount of

light available and turns on the IR LEDs

when necessary.

C) Locking Ring - Loosening the locking

ring will allow you to rotate the barrel of

the camera, so no matter what direction it

faces, you can spin the camera so that your

images are correctly oriented.

A) Power Socket - Connect the power

adapter here.

B) RJ45 (Ethernet) - For a wired connection,

connect this to a spare port on your router.

C) Alarm I/O Block -

For connecting external

alarms and sensors.

A) Wi-Fi Antenna - The included Wi-Fi

antenna connects here.

B) Reset -

When pressed and held for

more than 10 seconds when the power is

disconnected and reconnected, all settings

will revert to the factory defaults.

C) Microphone - Located at the bottom, it

allows the camera to hear nearby sounds

and stream them with the video.

BAccessing the Micro-SD Card slot

To remove the protective cover,

use a Phillips-head screwdriver to

unscrew the screw located at the top

of the camera.

Even though this camera primarily connects to your home network wirelessly, it can also connect to

your router using the supplied LAN cable. The main advantage of a LAN connection is that you don’t get

disconnections or dropouts as you would with a wireless connection.

Remove each rubber cap and unscrew

to gain access to the Micro-SD Card slot.

There are three in total.

Gently pull the camera apart to reveal

the Micro-SD Card slot.

Inserting a

Micro-SD card allows you to capture

a series of snapshots and video files

directly to the card, as well as setting

an alarm schedule so it records

when it has detected motion. This

is optional and is recommended for

advanced users only.

First thing to do is to screw the provided

Wi-Fi antenna into the antenna socket

located on the camera. Use a clockwise

motion to connect. It is recommended

to leave the antenna in a vertical

position for best reception.

Now connect the

supplied power adapter

to the power input on

the camera.

US B In te rne t Et her net

432

Produkt Specifikationer

Mærke:	Swann
Kategori:	Overvågningskamera
Model:	ADS-466
Type:	IP-sikkerhedskamera
Brugervejledning:	Ja
Produktfarve:	Hvid
Wi-Fi:	Ja
Formfaktor:	Kugle
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Maksimal opløsning:	1280 x 720 pixel
Kabler inkluderet:	AC,UTP
Forbindelsesteknologi:	Kabel & trådløs
DC-in-stik:	Ja
AC-adapter inkluderet:	Ja
Monteringstype:	Loft/væg
Understøttet placering:	Indendørs & udendørs
Understøttede Mac-operativsystemer:	Mac OS X 10.7 Lion,Mac OS X 10.8 Mountain Lion,Mac OS X 10.9 Mavericks
Dag/nat funktion:	Ja
Fjernbetjening visning:	Ja
Minimumsbelysning:	- Lux
Nattesyn:	Ja
Billedhastighed:	30 fps
Monteringssæt:	Ja
Nattesyn, afstand:	15 m