Switel BCF 860 Manual
Læs nedenfor 📖 manual på dansk for Switel BCF 860 (2 sider) i kategorien Babyalarm. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
BCF 860 Baby Monitor
3
2
1
4
56
7
8
9
10
11
12
13
15
14
16
17 18 19 21 2220 23
24
25
26
ENGLISH
Operating Manual
Please read and observe the following in
formation and keep the operating manual
nearby for future reference!
Safety information
WARNING!
• Risk of fatal injury through cable!
Children could become entangled in the cables and strangle
themselves.
Ensure that the baby monitoring units and power cables are
out of reach of babies/children, i.e. they are at least one meter
away.
• Risk of explosion!
Only use the power adapter plugs supplied!
Only use batteries supplied or ones of the same type!
Always treat batteries with due care and attention and only
use batteries as described.
Never use standard and rechargeable batteries together.
Never use rechargeable batteries or standard batteries with
different capacities or charge statuses together. Never use
standard or rechargeable batteries which are damaged.
• Risk of suffocation through small objects, packaging and
protective foil!
Keep children away from the product and its packaging!
CAUTION!
• Risk of fire through power adapter plugs!
Power adapter plugs can heat up.
Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or
such.
• Risk of tripping due to improperly laid cable!
Lay the cables so that nobody can trip over them!
• Risks to health and the environment from batteries!
Never open, damage or swallow batteries or allow them to
pollute the environment. They could contain toxic and ecolo
gically harmful heavy metals.
Operating elements
Receiver unit
1 Antenna
2 button: Change transmitter unit
3 button: Feed alert / Zoom
4 Stand
5 Display
6 button: Confirm input / Open menu
7 button: Navigation in menu
8 button: Talk button / Back
9 Microphone
10 AV port (3.5 mm socket)
11 LED, status indicator
12 button: Receiver unit on/off switch
13 SD card slot
14 Power adapter socket
15 Loudspeaker
16 Battery compartment
Transmitter unit
17 button: Transmitter unit on/off switch
18 LED, status indicator
19 Camera
20 LED, night vision
21 Microphone
22 button: Increase volume
23 button: Reduce volume
24 Temperature sensor
25 Power adapter socket
26 Light sensor
Intended use
The baby monitor serves to monitor a baby/child in a room. The
transmitter unit, located near the child, transmits noises and images
from its immediate vicinity to the receiver unit. Any other use is con
sidered unintended use. Unauthorised modification or reconstruction
is not permitted. Under no circumstances open the devices or com
plete any repair work yourself.
The devices are not intended for medical purposes. Warning
and signal tones from respiratory or heartbeat monitoring equip
ment are not transmitted.
Use only in suitable environments
Observe all local directives and regulations.
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
Package contents
- Receiver unit
- Transmitter unit
- Base for transmitter unit
- Battery for receiver unit
- 2 power adapter plugs
- Operating manual
Display and explanation of operations
ÆAction to take
Result of action
[2] Reference in the graphic
Press the button
Press and hold the button
5 sec. Keep the button pressed for 5 seconds
Select menu options by pressing the Navigation
button and confirm it by pressing
PlayAll Menu option in the display
Icon in the display
Inserting the battery in the receiver unit
Slide the cover on the rear downwards and remove it.
Insert the battery in the battery compartment [16], ensure correct
polarity.
Close the battery compartment.
Charge the batteries for at least 12 hours when charging for the
first time and ensure they are subsequently discharged and
charged fully. This aids a long service life of the batteries.
Inserting the SD card in the receiver unit
In order to record videos or pictures, an SD card must be inserted
(not included).
Insert the SD card in the slot [13] provided The SD card
latches audibly in place.
Putting the receiver unit into operation
The receiver unit can be powered by the battery, by a normal mains
power supply via the power adapter plug or by a USB connection on
a computer.
Connecting the receiver unit
Connect the power adapter to the power adapter socket [14] on
the receiver unit and a properly installed mains power outlet.
Switching the receiver unit on/off
[12] 5 sec. Receiver unit is switched on, start screen
appears in the display.
[12] 5 sec. Receiver unit is switched off, the display
goes out.
Operating and charge indicators on the receiver unit
The status indicator LED [11] lights up. The receiver unit is
switched on.
Putting the transmitter unit into operation
The transmitter unit is not equipped with a built-in battery. It can only
be operated via the mains power supply using the power adapter
plug.
Connecting the transmitter unit
Connect the power adapter to the power adapter socket [25] on
the transmitter unit and a properly installed mains power outlet.
Switching the transmitter unit on/off
The transmitter unit continues to transmit even when the receiv
er unit is switched off. The signals can be received by other
devices. A maximum of 4 transmitter units can be registered on the
receiver unit.
[17] 5 sec. Transmitter unit is switched on, operating
indicator lights up green.
Registering a transmitter unit
Registration occurs automatically when the transmitter unit is
switched on. The image from the camera appears in the display.
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be
selected manually. Transmitter unit 1 is selected as standard.
1x [2] Waitforconnecting…. appears in the display, transmit
ter unit 2 is selected.
2x [2] Waitforconnecting…. appears in the display, transmit
ter unit 3 is selected.
3x [2] Waitforconnecting…. appears in the display, transmit
ter unit 4 is selected.
Icons in the display
Signal strength
The equipment has a range of up to 300m. The range can be
reduced by obstructions, such as walls etc. Electronic equip
ment in the vicinity can also cause disturbance.
Feed alert is activated
Battery is full
Battery is empty
When the battery is being charged, bars continually run through
the battery icon.
VOX mode (voice activation)
When VOX mode is activated, the display is switched off after a short
time (ECOModeactivated appears in the display) and is switched on
again after detecting a sound.
Switching VOX mode off
[6] VOICESENSOR OFF
Talk function
[8] Voice communication is possible from the receiver
unit to the transmitter unit.
Night vision function
If the brightness of the area monitored no longer suffices for normal
operation, the equipment automatically switches to night vision.
When the night vision function is activated, only objects up to
2 m away can be viewed.
Photo function
In order to take a photo, an SD card (not included) must be installed
in the receiver unit .
[7] down The photo icon appears briefly in the display, the
photo is stored on the SD card.
Video function
In order to record a video, an SD card (not included) must be in
stalled in the receiver unit.
[7] up The video icon appears briefly in the display, the
video is stored on the SD card.
Setting the feed alert
You can set-up an acoustic feed alert to be sounded at 30 minute
intervals within a time period of 30 minutes to 4 hours.
[3], repeatedly if necessary.
Settings using the menu
The menu can be used to execute various functions and define
diverse settings. All the settings are confirmed by pressing the
button [6]. Press the button [8] to skip one menu level back.
Alert signals
You can set-up alert signals to be sounded in the event of connec
tion problems between the receiver and transmitter units or if the
battery charge in the receiver unit is low.
Alert signal for connection difficulties
You can set-up an alert signal to be sounded in the event of connec
tion problems between the receiver and transmitter units.
[6] ALERTRINGTONE NoConnectAlarm ON/OFF
Alert signal for low battery charge
You can set-up an alert signal to be sounded in the event the battery
in the receiver unit must be recharged.
[6] ALERTRINGTONE LowBatteryAlarm ON/OFF
Brightness
[6] SCREENDISPLAY Brightness Level1 - Level5
Back-lighting
You can define how long the display should remain on after the last
time a button was pressed.
[6] SCREENDISPLAY LCDBacklightTime
KeepOn 10sec/ /20sec/30sec/ /1min 3min
Picture mode
[6] SCREENDISPLAY PictureMode / Standard Vivid
Lullaby
You can play lullabies on the transmitter unit. Settings, such as the
volume, are adjusted using the receiver unit.
Play once
LULLABIES Lullaby1 - Lullaby8 [Select an entry]
PlayOnce
Play all
LULLABIES PlayAll
Repeat playback
LULLABIES Lullaby1 - Lullaby8 PlayRepeat
Setting the volume
You can alter the volume at which the lullabies are played.
[22] Increase the volume
[23] Reduce the volume
Sensitivity
Example: High.
VOICESENSOR High
If the VOICESENSOR is set to OFF, image and sound are
transmitted continuously.
Temperature
You can set the temperature unit, the highest and lowest temperat
ure limits and the display of the temperature for the environment
monitored. You can also define whether an acoustic alert signal
should be issued if the ambient temperature moves outside the spe
cified range.
Temperature unit
[6] TEMPERATURE Scale Celsius /Fahrenheit
Minimum temperature
[6] TEMPERATURE Minimum
Maximum temperature
[6] TEMPERATURE Maximum
Alert signal
[6] TEMPERATURE ALERTRINGTONE ON/OFF
Language
[6] LANGUAGE English/Français/Deutsch/Nederlands
etc.
Browsing through the SD card
You can browse through the photos and videos recorded on the SD
card on the receiver unit and deleted them, if necessary.
Displaying photo recordings
[6] SDBROWSER Play Photo is displayed
Displaying video recordings
[6] SDBROWSER Play Video is displayed
Time and date
[6] TIMESET Set the time
[6] TIMESET Set the date
Connecting to a television
Connect the receiver unit [10] to the AV input of a television set using
a suitable AV cable (not included).
Power adapter plug, receiver unit
Using the energy-efficient power adapter plug (input 100-240VAC,
output 6VDC, 790mA) the zero load is approx. 0.04 - 0.06 W. The
average efficiency is approx. 71.94 %. The maximum power con
sumption is approx. 4.14 W.
Produkt Specifikationer
| Mærke: | Switel |
| Kategori: | Babyalarm |
| Model: | BCF 860 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Switel BCF 860 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Babyalarm Switel Manualer
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Babyalarm Manualer
- Babyalarm SilverCrest
- Babyalarm Amplicomms
- Babyalarm Denver
- Babyalarm Sencor
- Babyalarm Beurer
- Babyalarm Philips
- Babyalarm Concept
- Babyalarm Medisana
- Babyalarm Gigaset
- Babyalarm Emos
- Babyalarm Technaxx
- Babyalarm Grundig
- Babyalarm D-Link
- Babyalarm Motorola
- Babyalarm Kodak
- Babyalarm Tefal
- Babyalarm Hama
- Babyalarm Hyundai
- Babyalarm Belkin
- Babyalarm TriStar
- Babyalarm TRENDnet
- Babyalarm Sanitas
- Babyalarm Fysic
- Babyalarm Topcom
- Babyalarm Uniden
- Babyalarm Medion
- Babyalarm EZVIZ
- Babyalarm König
- Babyalarm Ariete
- Babyalarm Elro
- Babyalarm Geemarc
- Babyalarm Babymoov
- Babyalarm Beaba
- Babyalarm Withings
- Babyalarm Terraillon
- Babyalarm Angelcare
- Babyalarm Fisher-Price
- Babyalarm Graco
- Babyalarm Neonate
- Babyalarm PADWICO
- Babyalarm Vtech
- Babyalarm Chicco
- Babyalarm Lindam
- Babyalarm Reer
- Babyalarm Alcatel
- Babyalarm Tommee Tippee
- Babyalarm Jane
- Babyalarm Alecto
- Babyalarm Olympia
- Babyalarm Ansmann
- Babyalarm HQ
- Babyalarm Niceboy
- Babyalarm Marmitek
- Babyalarm Basetech
- Babyalarm Tesla
- Babyalarm Foscam
- Babyalarm Lorex
- Babyalarm Cobra
- Babyalarm Xblitz
- Babyalarm Joblotron
- Babyalarm Binatone
- Babyalarm Eufy
- Babyalarm Overmax
- Babyalarm Albrecht
- Babyalarm Nova
- Babyalarm Trebs
- Babyalarm Bébétel
- Babyalarm Manhattan
- Babyalarm Brondi
- Babyalarm GoClever
- Babyalarm Lupilu
- Babyalarm Duux
- Babyalarm Audioline
- Babyalarm BT
- Babyalarm CAPiDi
- Babyalarm Tigex
- Babyalarm Lionelo
- Babyalarm Pabobo
- Babyalarm Oricom
- Babyalarm Oregon Scientific
- Babyalarm SereneLife
- Babyalarm Stabo
- Babyalarm Duronic
- Babyalarm TrueLife
- Babyalarm Kogan
- Babyalarm Cresta
- Babyalarm Chipolino
- Babyalarm Summer
- Babyalarm BabyOno
- Babyalarm Safety 1st
- Babyalarm Esscom
- Babyalarm Luvion
- Babyalarm Hartig And Helling
- Babyalarm NUK
- Babyalarm Tomy
- Babyalarm Babysense
- Babyalarm Jablotron
- Babyalarm Modern-Electronics
- Babyalarm Hartig Helling
- Babyalarm Levana
- Babyalarm Summer Infant
- Babyalarm IBaby
- Babyalarm Fischer Price
- Babyalarm Mobi
- Babyalarm MicroTalk
- Babyalarm Oretti
- Babyalarm Neno
- Babyalarm LeamsiQ
- Babyalarm Philips-Avent
- Babyalarm Heimvision
- Babyalarm BabySafe
- Babyalarm Chillax Baby
- Babyalarm Hubble Connected
- Babyalarm Peekyboo
Nyeste Babyalarm Manualer
21 December 2024
18 December 2024
17 December 2024
15 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024