Tascam CD-6010 Manual

Tascam CD-afspiller/optager CD-6010

Læs nedenfor 📖 manual på dansk for Tascam CD-6010 (1 sider) i kategorien CD-afspiller/optager. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
CD-6010
TASCAM CD-6010 Printed in China
Functions added in firmware
V1.30
End check function
An end check function has been added that allows you to
check the ends of tracks. This is useful when you want to
check how a track ends.
Setting the amount of time checked
Set how many seconds before the end of the track
playback should start with this function. Use the “25
END-C” menu item to set the number of seconds before
the end of the track.
Setting range: 5 (default) – 35 (in 5 second intervals)
Using this function
To start end check playback of the currently selected track
(for the number of seconds set above), during playback or
when paused, press and hold the 9[PAUSE] button and
press the 7[PLAY] button on the main unit or press the
ENTER button on the remote control.
After playback completes, the unit returns to the call
point (the point when playback last started) and pauses
playback.
NOTE
• The end check function cannot be used with data CDs.
• During A-B repeat playback, end check playback will
start the set number of seconds before the B point,
and the unit will pause at the A point when playback
completes.
Time search function
A time search function has been added that enables
locating to a designated time from the start of a track.
Setting the time search function
Use the “26 NUM-B” menu item to set the time search
function.
Options
TR (default): The time search function is disabled. Press
a number button to directly select a track.
TI: The time search function is enabled. Press a number
button to activate time search mode. The input
position is shown with a blinking “_” (underbar).
Display during time search mode
Using this function
When time search mode is active, use the number buttons
on the main unit or remote control to input minutes,
seconds and frames (two digits each). When input is
complete, the unit locates to the designated time. After
locating, the unit will pause if it had been stopped or
paused before or it will continue playback if it had been
playing before.
NOTE
• The time search function cannot be used with data
CDs.
• The time search function cannot be used when the cue
mode or ash start function is enabled.
• When the time search function is set to “TI”, the
number buttons on the main unit and the remote
control cannot be used to select tracks.
• Press the CLEAR button on the main unit or the remote
control to clear an input time.
• If the “17 FRAME” menu item is set to “OFF”, only
minutes and seconds can be input (frame input is not
possible).

Produkt Specifikationer

Mærke: Tascam
Kategori: CD-afspiller/optager
Model: CD-6010

Har du brug for hjælp?

Hvis du har brug for hjælp til Tascam CD-6010 stil et spørgsmål nedenfor, og andre brugere vil svare dig


CD-afspiller/optager Tascam Manualer

Tascam

Tascam CD-RW901SL Manual

4 Oktober 2024
Tascam

Tascam CD-VT1 Manual

24 September 2024
Tascam

Tascam CD-160 Manual

14 August 2024
Tascam

Tascam CC-222SL Manual

12 August 2024
Tascam

Tascam CD-200 Manual

2 August 2024
Tascam

Tascam CD-P1260 Manual

1 August 2024
Tascam

Tascam CD-302 Manual

1 August 2024
Tascam

Tascam CD-A580 Manual

30 Juli 2024
Tascam

Tascam CD-9010 Manual

29 Juli 2024
Tascam

Tascam CD-160MKII Manual

28 Juli 2024

CD-afspiller/optager Manualer

Nyeste CD-afspiller/optager Manualer

Sony

Sony Walkman DEJ010 Manual

5 Oktober 2024
Lenco

Lenco SCR-97 Manual

3 Oktober 2024
Technics

Technics SL-MC70 Manual

3 Oktober 2024
Roland

Roland CD-2E Manual

2 Oktober 2024
Denver

Denver TCS-86 Manual

2 Oktober 2024
Trevi

Trevi CMP 524 Manual

1 Oktober 2024
Cambridge

Cambridge CD10 Manual

1 Oktober 2024
Technics

Technics SL-E10 Manual

30 September 2024
Pioneer

Pioneer PD-10-S Manual

29 September 2024
JVC

JVC XL-PG39RD Manual

27 September 2024