Taylor 3710-21 Manual

Taylor Køkkenvægte 3710-21

Læs gratis den danske manual til Taylor 3710-21 (2 sider) i kategorien Køkkenvægte. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Taylor 3710-21, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Mechanical Kitchen Scale
3710
®
Leading the Way in Accuracy
Instruction Manual
Instruction Manual
Instruction Manual
Instruction ManualInstruction Manual
Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor® scale is an
example of superior design and craftsmanship. Please read this instruction
manual carefully before use. Keep these instructions handy for future
reference.
1. Place the scale base on a hard, level surface.
2. There may be pieces of cardboard and plastic fasteners between the
base and platform support bar to prevent damage during shipping. Do
not remove cardboard stabilizers until instructed to do so.
3. On the platform support bar on the top of the scale, there are 2 screws in
the outermost holes. Loosen and remove the screws. Set the screws aside.
Take care not to misplace the screws.
4. Place the bowl frame on the platform support bar. Line up two of the
crossbar screw holes with the screw holes on the support bar.
5. Place one of the screws through the top of one of the holes. Tighten the
screw with a Philips screwdriver. Repeat with the other screw hole.
6. Remove cardboard stabilizers
7. The scale may be disassembled for storage by removing the weighing tray
and loosening the screws and removing the crossbar.
1. Place the scale base on a hard, level surface. Place the weighing tray so
that it is stable on top of the base unit.
2. 0The pointer should indicate “ ” before objects to be weighed are placed
on the scale. To adjust the pointer to “ ”, use the adjustment dial located 0
on the top of the base unit.
3. Carry the scale by holding the base unit. Take care not to drop the tray. If
the scale is relocated, recalibration to “ ” may be required. To do so, 0
repeat steps 1 and 2.
Assembly Instructions
Calibration/General Weighing Operation
Taylor® warrants this product to be free from defects in material or
workmanship for one (1) year from date of original purchase for the original
purchaser. It does not cover damages or wear resulting from accident,
misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
If service is required, do not return to retailer. Should this product require
service (or replacement at our option), please pack the item carefully and
return it prepaid, along with store receipt showing the date of purchase and a
note explaining reason for return to:
There are no expressed warranties except as listed above. This warranty gives
you specific legal rights, and you may have other rights which vary from state
to state.
For additional product information, or warranty information in Canada or
elsewhere outside the USA, please contact us through www.taylorusa.com.
© 2009 Taylor Precision Products and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are registered
trademarks of Taylor Precision Products and its affiliated companies. All rights
reserved.
Made to our exact specifications in China.
Not legal for trade.
www.taylorusa.com
1. The scale base is not dishwasher safe. Immersing the scale in water may
trap liquid between the lens and the body that cannot be effectively
dried-out. Damage will void warranty.
2. An occasional wiping with a soft cloth and mild soap will keep your Taylor®
scale clean and attractive. Do not use abrasive cleaners. Your Taylor®
scale does not require oiling or lubrication of any kind.
3. The weighing tray is top dishwasher safe.
4. Do not put either the base unit or the tray in a microwave.
5. Protect the scale from flames, heat, direct sunlight and high humidity.
6. Do not tamper with the scale's internal components. Doing so will
invalidate the warranty on this unit and may cause damage. The scale
contains no user-serviceable parts.
Care and Maintenance
One Year Limited Warranty
3710 9.09
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA

Produkt Specifikationer

Mærke: Taylor
Kategori: Køkkenvægte
Model: 3710-21

Har du brug for hjælp?

Hvis du har brug for hjælp til Taylor 3710-21 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køkkenvægte Taylor Manualer

Taylor

Taylor 3804-44 Manual

11 Juli 2024
Taylor

Taylor 3890 Manual

11 Juli 2024
Taylor

Taylor 3710-21 Manual

10 Juli 2024
Taylor

Taylor 3875 Manual

5 Juli 2024

Køkkenvægte Manualer

Nyeste Køkkenvægte Manualer

Morphy Richards

Morphy Richards 46185 Manual

15 Januar 2025
Jata

Jata 717 Manual

14 Januar 2025
Beper

Beper 90.115R Manual

14 Januar 2025
Ardes

Ardes AR1PA3M Manual

13 Januar 2025
Sencor

Sencor SKS 31GR Manual

12 Januar 2025
ADE

ADE KE 707 Angelina Manual

12 Januar 2025
Jata

Jata 765 Manual

15 Oktober 2024
AcuRite

AcuRite 00940 Manual

13 Oktober 2024
Jata

Jata 773 Manual

13 Oktober 2024
Ardes

Ardes AR1PA2V Manual

13 Oktober 2024