Techly ITC-LASER76 Manual

Techly Trådløs præsentationsenhed ITC-LASER76

Læs gratis den danske manual til Techly ITC-LASER76 (2 sider) i kategorien Trådløs præsentationsenhed. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Techly ITC-LASER76, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

User’s manual

WIRELESS PRESENTER

I -LASER76TC

www.techly.com

In compliance with EU Directive WEEE this

product is marked with this symbol. It means

that used electrical and electronic products

should not be mixed with general household

waste. There is a separate collections system

for these products in compliance with WEEE

directive, otherwise contaminative and

hazardous substances can pollute the

environment.

With the CE sign, Techly® ensures that the

product is conformed to the basic European

standards and directives.

INSTALLATION

Take out the mini USB receiver.

EN WIRELESS PRESENTER www.techly.com

Plug the USB receiver into USB port.

Operate the wireless presenter.

Turn off the wireless presenter.

Turn off the power switch

Micro USB port

of wireless presenter

PC's USB port

recharging

the wireless

presenter via PC

FREQUENTLY ASKED QUESTIONS

1. How to know the battery is out of power?

Turn on the power switch of the presenter, then

press laser button to check if the laser can be

turned on. If the laser cannot be turned on, usually

it means the battery is out of power or the laser

diode is broken and need replacement.

In other case, if the LED on the wireless presenter

starts to ﬂash slowly, it means the power is low and

the battery needs to be recharged.

2. Why does the laser pointer not work?

First, check the power switch. Second, check

whether the wireless presenter is in low power or

out of power. If the LED ﬂashes slowly, it means the

power is low and the battery needs to be

recharged. If all the other buttons can work, only

the laser pointer cannot work, the laser diode may

need replacement. Third, check the place of anode

and cathode of battery. Before putting a battery

into the presenter, remember to remove the plastic

cover of the battery.

3. When the mini USB receiver plugs into the PC

USB, the computer does not detect the device,

why?

Please check whether the USB works or not. You

can use a USB mouse or keyboard to test the USB

port. If a USB mouse or keyboard works on the

USB port and the USB receiver of the presenter

doesn’t, it means the USB receiver of the presenter

is broken or the USB drivers is not compatible with

the USB receiver. You can try another USB port of

the same computer or USB ports of another

computer to check whether the USB receiver of the

presenter is working. If it works on other computer,

it means the USB drivers of the computer are not

compatible with the USB receiver. You need to

back up your data and reinstall the OS.

4. The laser is ok and the USB receiver can be

detected by the computer, but the presenter

cannot control the computer, why?

The reason is the USB receiver doesn’t save the

presenter’s address properly. You can use a

CodeMatch software to let the USB receiver to

save the presenter’s address again.

CHARGING THE WIRELESS PRESENTER

LOW POWER INDICATION

When the power is low, the red LED will ﬂash

slowly to remind the user to recharge the

wireless presenter.

RECHARGING THE WIRELESS PRESENTER

Connect the wireless presenter to a USB port,

the red LED will stop ﬂashing and keep red to

show the wireless presenter is being

recharged. If the red LED turns off, it means the

recharge is completed. Normally the

recharging time is about two hours.

8 9 10 11

Be sure to carefully read this user’s manual before using

the wireless presenter and keep it for future reference.

WARNING! RISK OF INJURY!

Laser beams can cause permanent damage to the

eyes. Do not look into the laser beam or shine the

laser beam into your eyes, other peoples’ eyes, or

the eyes of pets. Be careful when pointing it

towards reﬂective surfaces. Keep this device away

from Children. This is a working tool, not a toy. It

should only be used by adults. Information in this

document is subject to change without notice. No

part of this document may be reproduced or

transmitted in any form or by any means, electroni-

cal or mechanical, for any purpose, without prior

permission of the seller. The seller provides this

document without warranty, or condition of any

kind. The seller may make improvements or

changes in the product described in this document

at any time.

EN WIRELESS PRESENTER

OPERATION SYSTEM

Windows 7, Windows 8, Windows 10, and above,

Mac OS, Linux, Android 4.3 or above.

PACKAGE CONTENTS

Wireless presenter x 1

User Manual x 1

Charge Cable x 1

SPECIFICATIONS

TRANSMITTER

Technology: Radio Frequency

Frequency: 2.4GHz

Control Distance: >100m

Laser: Class 2M

Max Output: <1mW

Laser Distance: >200m

Wavelength: 650nm/532nm

Battery: 360mAh Polymer

Lithium Battery

Working Voltage: 3.7V

Sleep Current <10uA

Dimension: 138 x 18 x 13 mm

Weight: 32.1g

USB RECEIVER

Working Voltage: 5V DC

Dimension: 24.7 x 13.8 x 5.14 mm

Weight: 1.9g

INTRODUCTION

Featuring a pen-like design, alt-tabbing and

hyperlink functions in presentations, it is an

intuitive and easy to use tool for any and all

presentations. Thanks to the built in laser pointer

you can point out details to your audience while

you present from up to 100 meters range.

The USB connector is securely placed within the

presenter itself, making sure you are always ready.

FEATURES

PowerPoint, Keynote and Prezi support. The

functions of page down and page up buttons

can be switched between Page Down/Up,

Left/Right Arrow and Up/Down Arrow, by

pressing the page down and page up buttons at

the same time.

2.4G RF frequency, which is an ISM free

frequency and can be used world-wide. Up to

100 meters’ wireless range, By using frequency

hopping technology to improve the signal to

noise ratio. It is Omni-directional and as such

allows for the control of devices in other rooms.

Through UniCoding 6 technology, the

transmitter can control 1 up to 6 USB receivers.

Support functions including Page up and Page

down，Full screen, Black screen.

Support hyperlinks function in PowerPoint.

Soft Silica Gel buttons allow for comfortable

use.

Storable receiver for easy carrying. The USB

receiver can be stored inside the wireless

presenter.

Safe laser class complies with EN60825-1.

Easy control of volume up/down.

Compatible with USB3.0, plug and play.

Three ways to save power consuming by auto

standby, deep sleeping and power switch.

360mAh Polymer Lithium battery and low power

reminding function. The led will ﬂash slowly

when the power is low.

FUNCTION MAP

Page Up

Page Down

Laser

Click it=Tab

Double click it= Enter

Keep pressing it=Alt+Tab

Pen Clip

LED

Long press=

full screen/

escape from it

Long press=

black screen/

escape from it

Volume +

Volume -

USB

recharging

port

on/off

USB

receiver

FUNCTION DESCRIPTION

Press and hold “Laser Pointer” button to turn

on the laser, release button to turn it off.

Use the Microsoft PowerPoint to open

PowerPoint ﬁles.

Press “Page Up” button for 2 seconds to Start

a slideshow from the current slide. Press the

button for 2 seconds again to escape from the

full screen.

Press “Page Down” button and “Page Up”

button to go forward and backward.

Press“Page Down” button for 2 seconds to

enter into black screen. Press “Page Down”

button for 2 seconds again to escape.

Note: When you press “Page Down” button for 2

seconds to enter the black screen, the USB receiver

will send the letter ‘b’ or comma ‘,’ to the

PowerPoint. If the Input Method Editor is open, the

letter ‘b’ or comma‘,’ will be intercepted and cannot

be sent to the PowerPoint. In this case, try to turn

off the IME or switch to the English input mode.

If hyperlinks exist on the page, click 

button, you can jump among the hyperlinks

and double click can be used to open the 

hyperlink. To click is same as to press Tab 

on keyboard. To double click is same as to 

press Enter on keyboard. For WPS doesn’t

support jumping hyperlinks by Tab, so WPS

doesn’t support this function.

After the hyperlink is opened, you can press

and hold button to switch between all 

opened application windows. Release it to

turn to the window you want to switch to. To

press and hold button is same as to press 

Alt-Tab on keyboard.

The presenter supports PowerPoint, Keynote

and Prezi by switching the functions of the

page down/up buttons. By default, the page

down/up buttons of the presenter function as

the Up/Down Arrow on keyboard, which can

support PowerPoint and Keynote. By pressing

the page down/up buttons at the same time,

the function will change to the left and right

arrows on the keyboard for Prezi support.

Doing it a second time changes the function

to page up and down, which supports many

other programs. Pressing them together a

third time will revert back to the default

setting.

Press “volume up” or “volume down” on the

side, you can adjust system volume.

10.

11.

12.

2 3 4 5 6 7

Produkt Specifikationer

Mærke:	Techly
Kategori:	Trådløs præsentationsenhed
Model:	ITC-LASER76
Bredde:	18 mm
Dybde:	138 mm
Højde:	13 mm
Vægt:	90 g
Antal pr. pakke:	1 stk
Brugervejledning:	Ja
Produktfarve:	Sort
Batterikapacitet:	360 mAh
Batteriteknologi:	Lithium polymer (LiPo)
Indikator for batteriniveau:	Ja
Kabler inkluderet:	Micro-USB
Pakketype:	Kasse
Certificering:	CE, RAEE
Trådløs teknologi:	RF
Kompatible operativsystemer:	Android 4.3
Antal knapper:	6
Frekvensbånd:	2.4 GHz
Modtager inkluderet:	Ja
Brugergrænseflade med trådløs modtager:	USB
Trådløs rækkevidde:	100 m
Understøttede Mac-operativsystemer:	Ja
Understøttede Linux-operativsystemer:	Ja
Plug and play:	Ja
Kapabilitet:	PowerPoint, Keynote, Prezi
Laser klasse:	2M
Præsentationsfunktioner:	Laser pointer, Media player control
Laserpen farve:	Rød
Bølgelængde område:	532 - 650 nm
Laserbølgeeffekt:	1 mW