Teledex BTX3510 Manual

Teledex Telefon BTX3510

Læs nedenfor 📖 manual på dansk for Teledex BTX3510 (2 sider) i kategorien Telefon. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

CONNECTING THE BTX3500/3510

Included with the BTX3500/3510 are (one each):

• Base unit • Coiled handset cord • User guide

• Handset • Clear plastic overlay • Line cord

Contact your supplier or Teledex for information on ordering

custom designed and printed faceplates to enhance the look of your

Teledex BTX3500/3510 telephone.

1) Located on the left side of the BTX3500/3510 is a modular jack

labeled TO HANDSET. Insert one end of the coiled handset cord

into this jack (you should hear it click when properly inserted).

2) Insert the other end of the coiled handset cord into the modular

jack on the handset.

3) Located at the top side of the telephone is the modular jack

labeled LINE, insert one end of the line cord into the jack and

the other end of the line cord into the telephone wall outlet jack.

4) The overlay is easiest to remove by, with your fingers, squeezing

the outer edges causing a slight bow in the middle, then carefully

remove one side of the overlay from the 4 tab guides. The over-

lay is easiest to insert when; The left or right side tabs are insert-

ed first, and the middle part of the overlay is slightly bowed to

allow for insertion of the other tabs.

RECEIVING A CALL

1) Lift the handset to connect to the ringing line.

2) To end the call, hang up by replacing the handset.

PLACING A CALL

1) Lift the handset.

2) Listen for dial tone. Dial the desired number, or press an AUTO

DIAL key to automatically dial a number (AUTO DIAL Keys are

located on the BTX3510 only).

3) To end the call, hang up by replacing the handset.

VISUAL RING INDICATOR AND MESSAGE WAITING

LIGHT

The raised red lens is a Visual Ring Indicator and Message Waiting

light. The lens will flash when the telephone is ringing. Additionally,

some telephone systems permit an operator or message center to turn

on the red Message Waiting light to alert you that you have a message

waiting.

USING THE DATA PORT

The DATA PORT provides convenient access to the telephone line

for connecting modems, fax and answering machines or other tele-

phone components.

Insert the modular line cord from your facsimile machine, modem,

etc., into the jack labeled DATA.

ADJUSTING THE RING VOLUME

Locate the adjustment control on the top side of the telephone

labeled RINGER LOW/HI. Slide the switch to the desired LOW or HI

ring volume. The ring volume can be changed at any time.

AUTO DIAL KEYS (APPLIES TO BTX3510 ONLY)

The BTX3510 has 3 programmable AUTO DIAL keys. These keys

can be programmed to automatically dial telephone numbers or, to

activate telephone system features when connected to a compatible

PBX.

The telephone will dial the number each time an AUTO DIAL key is

pressed. Some of the AUTO DIAL locations may have been prepro-

grammed and labeled before installation.

STORING AUTO DIAL KEYS (APPLIES TO BTX3510

ONLY)

The telephone must be connected to a telephone jack.

1) Lift the handset.

2) Use the back of a pencil to Press the STORE key and release it

(see back page for key location).

3) Enter the telephone number (including PAUSE* as required).

The dialing sequence can be up to 15 digits.

4) Press the STORE key.

5) Press the AUTO DIAL key where the number is to be stored.

6) Replace the handset.

*A 3.6 second pause can be entered in a dialing sequence by pressing

the REDIAL key for each PAUSE required.

REDIAL KEY (APPLIES TO BTX3510 ONLY)

To REDIAL the last telephone number dialed:

1) Lift the handset, listen for dial tone.

2) Press the REDIAL key, the BTX3510 will dial the last number

dialed.

HANDSET VOLUME KEY

The handset has three volume levels. When the handset is first lifted,

the handset volume is normal.

To change the HANDSET VOLUME:

Locate the HANDSET VOLUME key to the right of the keypad.

Press the key once and the volume level will increase one level (to

medium volume).

Press the key once more an the volume level will increase an addi-

tional level (to high volume).

To return the handset volume back to normal volume, press the

handset volume key again.

FLASH KEY

Pressing the key initiates a 600ms hookflash. Typical usage isFLASH

to access PBX/CO features like call waiting.

RMA PROCEDURES

The following procedure should be followed with all Teledex

telephone products prior to sending the telephone to the factory

for repair.

1) Please perform the tests listed below:

a. Test the telephone on a different telephone jack.

b. Test telephone with a different line cord.

c. Test with a different handset cord (coiled cord).

d. For two line products, please ensure that one of the line

buttons is pressed (if both line buttons are in the UP position,

the telephone will not operate).

2) If the steps listed above do not provide a remedy for the suspect

telephone, please place a tag on the individual telephone

describing the defect. Next, call the Teledex Repair Department

at 1 (800) 875-8539 for an RMA number. You must have an

RMA number to return products to Teledex.

3) Kindly note: An RMA number is unique to each return

shipment. Do not duplicate this number on any future shipments.

SHIPPING INSTRUCTIONS:

Please print the RMA number clearly on the outside of your shipping

carton(s). Please ship to the following address:

Teledex LLC / RMA#___________

6311 San Ignacio Avenue

San Jose, CA 95119

FREIGHT CHARGES:

The Customer is responsible for shipping products for repair to

Teledex. After repair, Teledex will return telephone products to the

Customer freight prepaid in the same manner in which is was sent

(i.e. Freight sent to Teledex UPS Blue, will be returned via 2 day ship-

ping).

**Please note: When telephones are returned for repair due to misuse

(i.e. liquid spills, abuse, or Customer modification - warranty label

broken), the Customer will be charged the standard repair fee, regard-

less of warranty status.

BTX3500/3510

GUESTROOM TELEPHONE

USERS GUIDE

Produkt Specifikationer

Mærke:	Teledex
Kategori:	Telefon
Model:	BTX3510

Har du brug for hjælp?

Hvis du har brug for hjælp til Teledex BTX3510 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Teledex Manualer

Teledex A110 Manual

6 September 2024

Teledex SIP ND2105 Manual

18 August 2024

Teledex Pearl S Manual

18 August 2024

Teledex SIP LD4210S Manual

18 August 2024

Teledex SIP ND2105S Manual

18 August 2024

Teledex SIP ND2110 Manual

18 August 2024

Teledex SIP ND2110S Manual

18 August 2024

Teledex SIP LD4105S Manual

18 August 2024

Teledex Opal 1003 Manual

18 August 2024

Teledex SIP LD4205S Manual

18 August 2024

Telefon Manualer

Nyeste Telefon Manualer

HTC Desire 19+ Manual

15 December 2024

Ranex RX 6031 Manual

15 December 2024

Vtech DS6611-2 Manual

14 December 2024

Vtech DS6771-3 Manual

14 December 2024

Vtech DS6161 Manual

14 December 2024

Vtech DS6621-2 Manual

14 December 2024

Vtech CS6114-21 Manual

14 December 2024

Panasonic KX-TGU410 Manual

14 December 2024

Vtech CS6124-21 Manual

13 December 2024

Vtech CS6929-3 Manual

13 December 2024