Texas Instruments SN74LVTH16541DL Manual

Texas Instruments Ikke kategoriseret SN74LVTH16541DL

Læs nedenfor 📖 manual på dansk for Texas Instruments SN74LVTH16541DL (18 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/18

www.ti.com

FEATURES

SN54LVTH16541 . . . WD PACKAGE

SN74LVTH16541 . . . DGG OR DL PACKAGE

(TOP VIEW)

1OE1

1Y1

1Y2

GND

1Y3

1Y4

VCC

1Y5

1Y6

GND

1Y7

1Y8

2Y1

2Y2

GND

2Y3

2Y4

VCC

2Y5

2Y6

GND

2Y7

2Y8

2OE1

1OE2

1A1

1A2

GND

1A3

1A4

VCC

1A5

1A6

GND

1A7

1A8

2A1

2A2

GND

2A3

2A4

VCC

2A5

2A6

GND

2A7

2A8

2OE2

DESCRIPTION/ORDERING INFORMATION

SN54LVTH16541

3.3-V ABT 16-BIT

WITH 3-STATE

SCBS691E – MAY 1997 –

•Members of the Texas Instruments Widebus™

Family

•State-of-the-Art Advanced BiCMOS

Technology (ABT) Design for 3.3-V Operation

and Low Static-Power Dissipation

•Support Mixed-Mode Signal Operation

(5-V Input and Output Voltages With

3.3-V V

CC)

•Support Unregulated Battery Operation

to 2.7 V

•Typical V

OLP (Output Ground Bounce) <0.8 V

at V

CC = 3.3 V, T

A= 25 C°

•I

o and Power-Up 3-State Support Hot

Insertion

•Bus Hold on Data Inputs Eliminates the N

for External Pullup/Pulldown Resistors

•Distributed V

CC and GND Pin Conguration

Minimizes High-Speed Switching Noise

•Flow-Through Architecture Optimizes P

Layout

•Latch-Up Performance Exceeds 500 mA

JESD 17

•ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200

Using Machine Model (C = 200 pF, R = 0)

•Package Options Include Plastic Shrink

Small-Outline (DL) and Thin Shrink

Small-Outline (DGG) Packages and 380-mil

Fine-Pitch Ceramic Flat (WD) Package Usin

25-mil Center-to-Center Spacings

These 16-bit buers/drivers are designed spe

CC operation, but

capability to provide a TTL interface to a 5-V sy

These devices are noninverting 16-bit buers

signals. For either 8-bit buer section, the two

be low for the corresponding Y outputs to be a

buer section are in the high-impedance state.

When V

CC is between 0 and 1.5 V, the devices are in

However, to ensure the high-impedance state

CC through a pullup

the minimum value of the resistor is determined

Active bus-hold circuitry is provided to hold unu

These devices are fully specied for hot-insertion

o and power-up 3-state.

o circuitry

disables the outputs, preventing damaging cu

The power-up 3-state circuitry places the outputs

which prevents driver conict.

Please be aware that an important notice concerning

Instruments semiconductor products and disclaimers

Widebus is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Produkt Specifikationer

Mærke:	Texas Instruments
Kategori:	Ikke kategoriseret
Model:	SN74LVTH16541DL
Type:	Logisk kredsløb
Bredde:	16 mm
Dybde:	7.59 mm
Højde:	2.59 mm
Antal pr. pakke:	25 stk
Pakkedybde:	473.7 mm
Pakkebredde:	14.24 mm
Pakkehøjde:	5.11 mm
Opbevaringstemperatur (T-T):	-65 - 150 °C
Driftstemperatur (T-T):	-40 - 85 °C
Pakketype:	SSOP
Antal stifter:	48
Bredde (med stifter):	16 mm
Højde (med stifter):	2.79 mm
Dybde (med stifter):	10.67 mm