The T.bone Tour Guide Mini Receiver Manual

The T.bone Mikrofon Tour Guide Mini Receiver

Læs nedenfor 📖 manual på dansk for The T.bone Tour Guide Mini Receiver (1 sider) i kategorien Mikrofon. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
EN
Safety instructions
Intended use
This device is used to receive radio signals and transform them into acoustic signals.
Any other use or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be assumed
for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke! Never let unattended children
use electrical devices.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
Tour Guide Mini Receiver
User manual
This manual contains important information on the safe operation of the device.
Read and follow the safety advice and instructions given. Retain the manual for
future reference. If you pass the device on to others please include this manual.
Interference with other electrical equipment
Using the device near radios or TV sets may cause interference. Then increase the
distance between the devices.
General handling
• To prevent damage, never use force when operating the switches and controls.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the
unit, this could lead to its destruction or re. Be sure not to let any metal objects
into the unit.
Possible hearing damage
With earphones connected, the device can produce volume levels that
may cause temporary or permanent hearing impairment. Do not operate
the device permanently at high volume. Decrease the volume level
immediately if you experience ringing in your ears or hearing impairment.
Features
• 16 transmission channels selectable
• Automatic synchronization of the transmission channel at channel change on
transmitter
• 3.5mm mini phone headphones output socket
• Service coverage: 50m (indoor) / 90m (outdoor)
• Fixed built-in rechargeable lithium polymer battery (3.7V • 600mAh)
• Micro USB charging connector
• 16 hours operating time per battery charge
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 386330_25.11.2019
Using the device
1. Use an appropriate USB charging station to charge the device. A full charge of
the built-in battery takes about 6 hours.
2. Connect the headset cable to the 3.5 mm mini phone socket (5).
3. Keep the on / o button (3) pressed for two seconds to turn the unit on. The
display (1) lights up and indicates the current transmission channel.
4. To select another channel keep the +/–buttons (4, 2) simultaneously pressed
for two seconds. The CH indicator ashes on the display and the icon
disappears. Use the +/–buttons to select the desired channel.
5. To conrm the selection, briey press the on / o button (3) or wait ve seconds
for the unit to save the new channel automatically. The CH indicator stops ash-
ing and the icon appears again. Make sure that transmitter and receiver are
always set to the same transmission channel. The display will ash continuously
when the device is not receiving a signal.
6. Eight dierent volume levels between (mute) and (full) are adjusta-
ble. To increase the volume press the +button (4), to reduce it press the –button
(2).
7. When the battery is fully charged, the display shows icon is . When this
ashing, only 10% battery power are remaining and you need to charge the
battery. During charging, this icon appears:
8. The unit turns o during charging. To use it during charging, keep the on / o
button (3) pressed for two seconds to turn the unit on.
9. The unit automatically turns o after 20 minutes without signal reception. To turn
the device o manually, keep the on / o button (3) pressed for two seconds.
10. The minimum distance between receiver and transmitter is 30 cm.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Operating elements
1. LCD
2. Channel selection / volume down
3. On / o switch | calling up setting parameters
4. Channel selection / volume up
5. Head set connection
6. Eyelet for lanyard
7. Micro USB charging
connector
Channel / frequency chart
863~865MHz
Cha. Cha. Cha. Cha.Freq. Freq. Freq. Freq.
01 863.060 05 863.185 09 863.310 13 863.435
02 863.560 06 863.685 10 863.810 14 863.935
03 864.060 07 864.185 11 864.310 15 864.435
04 864.560 08 864.685 12 864.810 16 864.935
To reset the software, press the + / –buttons four times simultaneously and then
hold them down until "01" and "02" ash in the display. When "01" ashes, press the
–button and then conrm with the On / o switch. Now try to connect transmitter
and receiver.
Technical specications
NF transmission range: 40Hz – 18kHz
Audio sampling rate: 8kHz 16bit
Dynamic range: >70dB
Signal-to-noise: >65dB
Modulation: GFSK
Latency: 22ms
Carrier frequency range: 794 – 937,5MHz
Charging source: 5V Micro-USB
Charging time: <6Stunden
Dimensions (W×H×D): 40×69×12mm
Weight: 32g

Produkt Specifikationer

Mærke: The T.bone
Kategori: Mikrofon
Model: Tour Guide Mini Receiver

Har du brug for hjælp?

Hvis du har brug for hjælp til The T.bone Tour Guide Mini Receiver stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon The T.bone Manualer

The T.bone

The T.bone DC-4000 Manual

24 August 2024
The T.bone

The T.bone freeU HT 600 Manual

24 August 2024
The T.bone

The T.bone freeU HT 863 Manual

24 August 2024
The T.bone

The T.bone MB-55 Manual

24 August 2024
The T.bone

The T.bone freeU HT 823 Manual

24 August 2024
The T.bone

The T.bone TWS One Vocal Manual

24 August 2024
The T.bone

The T.bone RB100 Manual

24 August 2024
The T.bone

The T.bone SC450 USB Manual

24 August 2024
The T.bone

The T.bone Speech 100 C Manual

24 August 2024
The T.bone

The T.bone TWS One Guitar Manual

24 August 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Elgato

Elgato Wave Panels Manual

16 November 2024
Warm Audio

Warm Audio WA-8000 Manual

15 November 2024
Pyle

Pyle PDWM3100 Manual

15 November 2024
Behringer

Behringer TM1 Manual

15 November 2024
Yamaha

Yamaha RM-WCH-8 Manual

14 November 2024
Yamaha

Yamaha RM-WOH Manual

14 November 2024
M-Audio

M-Audio AIR 192|4 Vocal Studio Pro Manual

13 November 2024
ORCA

ORCA OR-78 Manual

12 November 2024
Behringer

Behringer CB100 VIOLIN Manual

10 November 2024
Behringer

Behringer ECM PRO Manual

10 November 2024