TP-Link Omada DS110GMP Manual

TP-Link Ikke kategoriseret Omada DS110GMP

Læs nedenfor 📖 manual på dansk for TP-Link Omada DS110GMP (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Installation Guide
Unmanaged Desktop PoE+ Switch
© 2023 TP-Link 7106510543 REV1.0.0
Switches Explanation
O: Ports run at 10/100/1000 Mbps and support PoE power supply up to 100 m away.
On: Ports run at 10 Mbps and support PoE power supply up to 250 m away.
Extend (for DS108GPL/DS110GMP)
Connection
Note: For simplicity, we will take DS108GPL for example throughout the Guide.
PC
IP Camera AP
Ethernet Ports (1-8)
PoE Ports (1-4)
IP Phone
PoE Devices
Router
LAN PortWAN Port
Internet
DC P er Adapterow
AC Power Cord
Note:
PoE ports can also connect to non-PoE devices, but only transmit data.
DS110GMP has two uplink ports, which typically connect to uplink devices like routers.
The combo port of DS110GMP consists of one RJ45 port and one SFP slot, which cannot be used
simultaneously.
The SFP slot of DS110GMP needs to work with a gigabit SFP module.
O: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch nds that the PD works abnormally, the switch will reboot it.
Recovery (for DS108GPL/DS110GMP)
Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.
O: Ports can transmit data with each other.
On: Specic ports cannot transmit data with other downlink ports. They can transmit data
only with the uplink ports.
Isolation (for DS110GMP)
O: All the ports transmit data with the same priority.
On: The specic ports transmit data with a higher priority than other ports.
Priority (for DS110GMP)
For DS110GMP:
On: 116 W≤Total power supply < 123 W
Flashing: Total power supply ≥ 123 W
O: Total power supply < 116 W
1.
2.
3.
4.
LED Explanation
Power PoE Status
On: Providing PoE power
Flashing: PoE fault
O: Not providing PoE power
On: Power on
O: Power o
Link/Act; Uplink 1, Uplink 2
Green On:
Running at 1000 Mbps, but no activity.
Green Flashing:
Running at 1000 Mbps and is transmitting or
receiving data.
Yellow On:
Running at 10/100 Mbps, but no activity.
O:
No device is linked to the corresponding port.
Yellow Flashing:
Running at 10/100 Mbps and is transmitting
or receiving data.
PoE Max
For DS108GPL:
On: 57 W≤Total power supply < 64 W
Flashing: Total power supply ≥ 64 W
O: Total power supply < 57 W


Produkt Specifikationer

Mærke: TP-Link
Kategori: Ikke kategoriseret
Model: Omada DS110GMP

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Omada DS110GMP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret TP-Link Manualer

TP-Link

TP-Link PG1200 Manual

19 September 2024
TP-Link

TP-Link PSM150-AC Manual

10 September 2024
TP-Link

TP-Link MC110CS Manual

10 September 2024
TP-Link

TP-Link RE815XE Manual

10 September 2024
TP-Link

TP-Link RE715X Manual

10 September 2024
TP-Link

TP-Link TL-SF1016DS Manual

10 September 2024
TP-Link

TP-Link TL-POE10R Manual

10 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024