Tripp Lite B024-H4U16 Manual

Tripp Lite Ikke kategoriseret B024-H4U16

Læs nedenfor 📖 manual på dansk for Tripp Lite B024-H4U16 (158 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/158

Owner’s Manual

NetDirector® 1U

Rack-Mount 4K/60 Hz

HDMI KVM Switch

with Audio

8-Port Model: B024-H4U08

16-Port Model: B024-H4U16

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Este manual está disponible en español en la página de Tripp Lite: tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Table of Contents

1. FCC Information 4

2. User Notice 4

3. Package Contents 4

4. Features 5

5. System Requirements 6

5.1 Console 6

5.2 Computers 6

5.3 Cables 6

5.4 Operating Systems 6

5.5 Components 7

6. Important Safety Instructions 10

6.1 General Safety Instructions 10

6.2 Rack-Mounting Safety 11

Instructions

7. Installation 12

7.1 Stacking 12

7.2 Rack Mounting 12

7.2.1 Front Rack-Mounting 12

7.2.2 Rear Rack-Mounting 14

7.3 KVM Switch Installation 16

7.3.1 Single-Stage Installation 16

7.3.2 Two-Stage Cascade Installation 17

7.3.3 Three-Stage Cascade Installation 18

7.3.4 Multi-Display Installation 20

7.3.5 Grouping Ports into Vertical 21

Channels

8. Basic Operation 22

8.1 Hot Plugging 22

8.1.1 Hot Plugging KVM Ports 22

8.1.2 Hot Plugging Console Ports 22

8.2 Port Selection 22

8.3 Port ID Numbering 22

 8.4 PoweringO󰀨andRestarting 23

the KVM

9. OSD Operation 24

9.1 OSD Login 24

9.2 OSD Hotkey 24

9.3 OSD Main Screen 25

9.4 OSD Main Screen Headings 25

9.5 OSD Navigation 26

9.6 OSD Functions 26

9.6.1 F1: Go To 26

9.6.2 F2: List 27

9.6.3 F3: Set 28

9.6.4 F4: Admin 30

9.6.5 F5: SKP 33

9.6.6 F6: BRC 34

9.6.7 F7: Scan 35

9.6.8 F8: Logout 36

10. Hotkey Operation 37

10.1 Hotkey Port Control 37

10.2 Hotkey Setting Mode (HSM) 37

10.3 Select the Active Port 38

10.4 Auto Scan Mode 38

10.5 Skip Mode 39

10.6 Keyboard / Mouse Reset 39

10.7 Hotkey Beeper Control 39

10.8 HSM Hotkey Control 40

10.9 OSD Hotkey Control 40

10.10 Port OS Control 40

10.11 Restore Default Values 04

10.12 EDID Mode 41

10.13 Mouse Emulation Control 41

10.14 HSM Summary Table 41

11. Keyboard Emulation 43

11.1 Mac Keyboard 43

11.2 Sun Keyboard 44

Table of Contents

12. RS-232 Operation 45

12.1 Setup 45

12.2 RS-232 Pin Assignments 45

12.3 Console Login: HyperTerminal 46

12.4 RS-232 Commands 47

  12.4.1 Verication 47

12.4.2 Login 47

12.4.3 Logout 48

12.4.4 Open/Close RS-232 Link 48

12.4.5 Set Baud Rate 49

12.4.6 Switch Port 49

12.4.7 Hotkey Setting 50

12.4.8 OSD Hotkey 51

12.4.9 USB Reset 51

12.4.10 Restore Default Settings 52

12.4.11 Firmware Upgrade 52

12.4.12 KVM Status 53

12.4.13 EDID Mode 54

12.4.14 Broadcast Mode 54

13. Firmware Management Utility 55

13.1 Downloading the Firmware 55

13.2 Preparation 55

13.3 Starting the Upgrade 56

13.4 Upgrade Successful 58

13.5 Upgrade Failed 58

13.6 Firmware Upgrade Recovery 58

 13.7 OSDConguration 59

Backup/Restore

13.7.1 Backup 59

13.7.2 Restore 60

14. Appendix 60

14.1 B024-H4U08 and B024-H4U16 60

Connection Tables

14.1.1 B024-H4U08 (First Level) + 60

B024-H4U08 (Second Level)

14.1.2 B024-H4U16 (First Level) + 60

B024-H4U16 (Second Level)

14.1.3 B024-H4U08 (First Level) + 61

B024-H4U08 (Second Level) +

B024-H4U08 (Third Level)

 14.2 Specications 62

14.3 Administrator Login Failure 63

14.4 Factory Default Hotkeys and 63

Settings

15. Warranty and Product 64

Registration

1. FCC Information

2. User Notice

3. Package Contents

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense. The user must

useshieldedcablesandconnectorswiththisequipment.Anychangesormodicationstothisequipmentnot

expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

Allinformation,documentation,andspecicationscontainedinthismanualaresubjecttochangewithoutprior

noticationbythemanufacturer.Themanufacturermakesnorepresentationsorwarranties,eitherexpressedor

implied,withrespecttothecontentshereofandspecicallydisclaimsanywarrantiesastomerchantabilityortness

for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed “as is.”

Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or

its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized

modicationstothisdevice.Itistheresponsibilityoftheusertocorrectsuchinterference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational

voltage setting was not selected prior to operation. VERIFY THAT THE VOLTAGE SETTING IS CORRECT

BEFORE USE.

• NetDirector B024-H4U08 / B024-H4U16 Rack-Mount KVM Switch with Audio

• (x2) DisplayPort 1.4 Cables

• (x2) USB 3.0 Cables

• (x2) Audio Cables

• Firmware Upgrade Cable

• Foot Pad Set (4 pc.)

• Power Adapter

• North America Power Cord

• EU Power Cord

• UK Power Cord

• Owner’s Manual

Check to ensure all components are present and in good order. If anything is missing, or was damaged in shipping,

contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the

switch or to any other devices on the installation.

4. Features

• One USB console controls up to eight (B024-H4U08) or sixteen (B024-H4U16) DisplayPort interface computers and

two additional USB 3.0 peripheral devices.

• Cascadable to three levels – controls up to 512 computers (B024-H4U08) or to two levels--up to 256 computers

(B024-H4U16).

• Multi-Display feature – stack up to eight units and display video to up to 8 monitors (dual-display/triple-display/quad-

display/multi-display).

• Supports DisplayPort video output and allows you to choose an appropriate video output and deploy console with

exibility.

• Superior video quality – up to 4K DCI (4096 x 2160 @ 60 Hz) resolution.

• Built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates.

• Audio enabled – full bass response provides a rich experience for 2.1 channel stereo sound.

• Supports HD audio.

• Computer selection via pushbuttons, hotkeys, OSD, and RS-232 commands.

• Independent switching of KVM and USB peripheral focus.

• Two-level (administrator/user) password authorization for enhanced security protection.

• Broadcast mode – operations can be simultaneously performed on all selected computers, such as software

installation and upgrading, systemwide shutdown, etc.

• Auto Scan Mode for monitoring all computers.

• Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice.

• Multilingual keyboard mapping – supports English (US), English (UK), German (DEUTCH), German (SWISS), French,

Hungarian,Italian,Japanese,Korean,Russian,Spanish,Swedish,TraditionalChinese,andSimpliedChinese.

• Mac/Sun keyboard support and emulation.

• Supports hot-plugging.

• HDMI compliant and HDCP 2.2 compliant.

• Multi-platform support for Windows, Linux, Mac, and Sun operating systems.

• Firmware upgradable.

• Supports multimedia, wireless keyboards and mouse.

5. System Requirements

5.1 Console

• HDMI monitor capable of the highest possible resolution in the installation

Note: For multi-display installations, multiple monitors are required. See 7.3.4 Multi-Display Installation for details.

• USB mouse

• USB keyboard

• Speakers (optional)

5.2 Computers

• An HDMI card or built-in HDMI port

Notes:

• The quality of the display is aected by the quality of the HDMI card. For best results, we recommend you purchase a

high-quality product.

• For multi-display installations, multiple monitors are required. See 7.3.4 Multi-Display Installation for details.

• USB-A port

• Audio ports (optional)

5.3 Cables

Note: The quality of the display is aected by the quality and length of the cables.

• For multi-display installations, standard USB-A to USB-B cables and standard HDMI cables are also required

Note: The B024-H4U08 and B024-H4U16 supports speaker ports only. Do not connect the microphone connector from the

KVM cable sets.

5.4 Operating Systems

OS Supported Versions

Windows Windows Server 2008, 2012, 2016, 2019 / Windows 7 SP1 / Windows 8 /

Windows 8.1 / Windows 10

Linux CentOS 7 and higher

OpenSUSE Leap 15.1

Snapshot8

10.26 and higher

Ubuntu 16.0.4 and higher

NeoKylin v7.0

Sun Sun Soloaris 11.3 and higher

Mac 10.6 and higher

Notes:

• Supports Linux Kernel 2.6 and higher.

• The B024-H4U08 and B024-H4U16 have a built-in USB 3.1 hub. They do not support PCs or operating systems that do not support

USB 3.1.

5.5 Components

Front View

B024-H4U08

B024-H4U16

No. Component Description

1Port Selection

Pushbuttons

For manual port selection:

• Press a port selection pushbutton for less than two seconds to bring the KVM, USB hub

and audio focus to the computer attached to its corresponding port.

• Press a pushbutton for longer than two seconds to bring the KVM and audio focus to the

computer attached to its corresponding port.

• Press pushbuttons 1 and 2 simultaneously for 2 seconds to perform a keyboard and

mouse reset. See section for details.10.6 Keyboard / Mouse Reset

• Press pushbuttons 7 and 8 simultaneously for 2 seconds to start Auto Scan Mode.

2 Port LEDs The Port LEDs are built into the Port Selection Switches. The left ones are the KVM Port

LEDs; the right ones are the USB LEDs:

KVM

• Lights DIM ORANGE to indicate the computer attached to the corresponding port is up

and running (on line).

•FlashestoindicatethatFirmwareUpgrademodeisine󰀨ect.

• Changes to BRIGHT ORANGE to indicate that the computer attached to its corresponding

port is the one that has the KVM focus (selected).

• Flashes to indicate that the computer attached to its corresponding port is being accessed

under Auto Scan mode.

USB

• Lights GREEN to indicate that the computer attached to its corresponding port is the one

that has access to the USB peripherals.

5. System Requirements

No. Component Description

3Firmware

Upgrade

Recovery Switch

Duringnormaloperationandwhileperformingarmwareupgrade,thisswitchshouldbe

intheNORMALposition.Ifarmwareupgradeoperationdoesnotcompletesuccessfully,

thisswitchisusedtoperformarmwareupgraderecovery.Seesection13.6 Firmware

Upgrade Recovery for details.

4 Audio Jack The cables from your main speakers plug in here.

Note: The speakers plugged into the front-panel audio jack have priority over those in the rear panel.

5Firmware

Upgrade Port

Thermwareupgradecablethattransfersthermwareupgradedatafromthe

administrator’s computer to the KVM switch connects to this RJ11 connector.

6USB 3.1 Gen 1

Peripheral Hub

Section

USB 3.1 peripherals (printers, scanners, etc.) plug into this port (this may require an extra

power adapter).

Note: The USB 3.1 hub cannot be accessed through the switch by computers on the second level of a

cascaded installation.

7 Reset Button Pressing this switch performs a system reset. When the system resets, the switch beeps

andtheportLEDsashinsuccessionuntiltheresetiscomplete.Aftertheresetiscomplete,

you can login again.

Note: This switch is recessed and must be pushed with a small object, such as the end of a paper clip

or a ballpoint pen.

8 Power LED Lights to indicate that the switch is powered up and ready to operate.

Rear View

B024-H4U08

B024-H4U16

No. Component Description

1Grounding

Terminal

The grounding wire used to ground the switch attaches here.

2 Power Jack The power adapter cable plugs in here.

3 Audio Jack The cables from your main speakers plug in here.

Note: The speakers plugged into the front panel audio jack have priority over those plugged in here.

4Console Port

Section

The cables from your console HDMI monitor, USB keyboard, USB mouse and speakers plug

in here. Each connector is marked with an appropriate icon to indicate itself.

5KVM Port

Sections

The cables that link the switch to your computers plug in here. Each KVM port section is

comprised of a speaker jack, a USB-B port, and HDMI connector.

5. System Requirements

123

4 5

123

4 5

6. Important Safety Instructions

6.1 General Safety Instructions

• Read all of these instructions and save them for future reference.

• Follow all warnings and instructions marked on the device.

• Do not place the device on any unstable surface. If the device falls, serious damage will result.

• Do not use the device near water.

• Do not place the device near or over radiators or heat registers.

• The device cabinet is provided with slots and openings to allow for adequate ventilation. To ensure reliable operation

and protect against overheating, these openings should never be blocked or covered.

• The device should never be placed on a soft surface such as a bed, sofa or rug. Doing so will block the device’s

ventilation openings. Moreover, the device should not be placed in a built-in enclosure unless adequate ventilation has

been provided.

• Never spill liquid of any type on the device.

• Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol

cleaners.

• The device should be operated from the power source indicated on the marking label. If uncertain of the power

available, consult your dealer or local power company.

• The device is designed for IT power distribution systems up to 230V phase-to-phase voltage.

• As an added safety feature, the device is equipped with a 3-wire grounding type plug. If unable to insert the plug into

the outlet, contact an electrician to replace the obsolete outlet. Do not attempt to plug into a two-prong ungrounded

outlet. Always follow local/national wiring codes.

• Do not allow anything to rest on the power cord or cables. Route the power cord and cables to avoid them being

stepped on or tripped over.

• If an extension cord is used with this device, ensure the total ampere ratings of all products used on the extension

cord do not exceed its rated ampere rating. Also ensure all products plugged into the wall outlet do not exceed a total

of 15 amperes.

•Considerationshouldbegiventotheconnectionofequipmentandthesupplycircuit,aswellaswhate󰀨ect

overloading the supply circuit might have on overcurrent protection and supply wiring.

• To help protect the system from unexpected transient increases and decreases in electrical power, use a Tripp Lite

Surge Protector, Line Conditioner, or Uninterruptible Power Supply (UPS).

• Position system cables and power cables carefully so nothing rests on any cables.

• When connecting or disconnecting power to hot pluggable power supplies, observe the following guidelines:

– Install the power supply before connecting the power cable to the power supply.

– Unplug the power cable before removing the power supply.

– If the system has multiple sources of power, disconnect power from the system by unplugging all power cables from

the power supplies.

• Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out

partsresultinginariskofreorelectricalshock.

•Donotattempttoservicethedevice;referallservicingtoqualiedservicepersonnel.

6. Important Safety Instructions

•Ifthefollowingconditionsoccur,unplugthedevicefromthewalloutletandbringittoqualiedservicepersonnel

for repair:

– The power cord or plug has become damaged or frayed.

– Liquid has been spilled into the device.

– The device has been exposed to rain or water.

– The device has been dropped or the cabinet has been damaged.

– The device exhibits a distinct change in performance, indicating a need for service.

– The device does not operate normally when the operating instructions are followed.

• Only adjust controls covered in the operating instructions. Improper adjustment of other controls may result in

damagethatwillrequireextensiveworkbyaqualiedtechniciantorepair.

• Do not connect the RJ11 connector marked “UPGRADE” to a public telecommunication network.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected

tocausethefailureofthelifesupportequipmentortosignicantlya󰀨ectitssafetyore󰀨ectivenessisnot

recommended.

6.2 Rack-Mounting Safety Instructions

• The ambient operating temperature in the rack may be an issue and is dependent upon the rack load and

ventilation. When installing in a closed or multi-device rack assembly, ensure the temperature will not exceed the

maximum rated ambient temperature.

•Beforeinstallingtherack,ensurethestabilizersaresecuredtotherack,extendedtotheoorandthefullweight

oftherackrestsontheoor.Installfrontandsidestabilizersonasinglerackorfrontstabilizersforjoinedmultiple

racks before working on the rack.

•Alwaysloadtherackfromthebottomupwiththeheaviestitemloadedintotherackrst.

• When loading the rack, avoid creating a hazardous condition due to uneven loading.

• Ensure the rack is level and stable before extending a device from the rack.

• Use caution when pressing the rail release latches or sliding a device into or out of a rack; slide rails can pinch

yourngers.

• After a device is inserted into the rack, carefully extend the rail into a locking position, then slide the device into the

rack.

• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not

exceed 80 percent of the branch circuit rating.

•Ensurethatproperairowisprovidedtodevicesintherack.

• Do not step on or stand on any device when servicing other devices in a rack.

• Slide/Rail (LCD KVM) mounted equipment is not to be used as a shelf or work space. Caution!

7. Installation

The B024-H4U08 and B024-H4U16 can be stacked on a desktop or rack mounted at the front or rear of a rack.

Notes:

• Allow at least 2 inches (5.1 cm) on each side for adequate ventilation and 5 inches (12.7 cm) at the rear for power cord and

cable clearance.

• The standard rack mounting kit does not include screws or cage nuts. If you need additional screws or cage nuts, contact your

rack dealer.

7.1 Stacking

The B024-H4U08 and B024-H4U16 can be placed on any level surface that can safely support the weight of the device

and the weight of the attached cables. Make sure the surface is clean and free of any materials that can block the

exhaust vents or otherwise interfere with normal operation of the switch.

To place the B024-H4U08 and B024-H4U16 (or to stack units if you are cascading them), remove the backing material

from the bottom of the rubber feet and stick them onto the bottom panel at the corners, as shown below:

7.2 Rack Mounting

7.2.1 Front Rack-Mounting

1 Remove each of the screws from the left and right sides near the front of the unit.

7. Installation

Use the M3 x 6 Phillips hex head screws supplied with the rack mounting kit to attach the rack mounting brackets

onto the sides near the front of the unit.

Place the KVM switch in the rack. Position it so that the holes in the mounting brackets line up with the holes in the

rack. Secure the mounting brackets to the front of the rack.

7. Installation

7.2.2 Rear Rack-Mounting

Remove each of the screws from the left and right sides near the rear of the unit.

Use the M3 x 6 Phillips hex head screws supplied with the rack mounting kit to attach the rack mounting

brackets onto the sides near the rear of the unit.

7. Installation

Place the KVM switch in the rack. Position it so that the holes in the mounting brackets line up with the holes in the

rack. Secure the mounting brackets to the rear of the rack.

7. Installation

6 At the other end of the cables from step 5, plug the DisplayPort cable, USB 3.0 cable, and audio cables into their

respective ports on the computer. Repeat steps 5 and 6 for other PC systems you are installing.

7 Plug your USB peripherals into the USB Type-A ports in the USB 3.1 Gen1 Peripheral Hub located on (Optional)

the unit’s front panel.

8 Plug the power adapter that came with your switch into an AC power source, then plug the power adapter cable

into the KVM’s power jack.

9 Power on the computers.

Note: Make sure all computers and devices connected to the KVM are also properly grounded.

7.3.2 Two-Stage Cascade Installation

To control even more computers, additional KVM switches can be cascaded from the KVM ports of the First Stage unit.

The cascaded KVMs that connect back to the First Stage unit are considered Second Stage units. As many as 128

(B024-H4U08) or 256 (B024-H4U16) computers can be controlled in a complete two-stage installation. Tables showing

the relation between the number of computers and the number of units needed to control them is provided in section

14.1 B024-H4U08 and B024-H4U16 Connection Tables.

4 5

USB HDMI

KVM Cable Set

7. Installation

USB HDMI

KVM Cable Set

USB HDMI

KVM Cable Set

Onceyouhavenishedcablingup(seesection7.3.2 Two-Stage Cascade Installation), power up according to the

following sequence:

For each Third-Stage unit, plug the power adapter cable into the switch’s Power Jack, then plug the power adapter

into an AC source.

For each Second-Stage unit, plug the power adapter cable into the switch’s Power Jack, then plug the power

adapter into an AC source.

Plug the First-Stage unit’s power adapter cable into its Power Jack, then plug the power adapter into an AC source.

Power on the computers.

Notes:

• The Power On sequence requires that all Third-Stage units be powered on rst. After they are all on, the Second-Stage units must

be powered on next. After the Second-Stage units are on, the First-Stage units must be powered on last. Only after all the switches

have been powered on in this sequence, can the computers be powered on.

• The USB 3.0 hub cannot be accessed through the switch by computers on the second or third level of a cascaded installation.

• Make sure the computers and devices that the B024-H4U08 / B024-H4U16 connects to are also properly grounded.

7. Installation

7.3.5 Grouping Ports into Vertical Channels

Once the cables have been connected and multi-display mode has been selected in the OSD, the KVM will auto-detect

the channels and display modes. Users can then assign them a channel number as the port name so all the Port 1s

become Channel 1, all the Port 2s become Channel 2, ... , and all the Port 7s become Channel 7. The ports will all be

switched at the same time, channel by channel.

Dependingonthenumberofstagesinyourstack,theKVMinstallationo󰀨ersdualdisplay(twostages),tripledisplay

(three stages), quad display (four stages) or multi-display (up to 8 stages) scenarios. For reference purposes, the

example below shows a four-stage installation with quad display functionality.

Ch1

Ch7 Ch6

First

Switch

Second

Switch

Third

Switch

Fourth

Switch

8. Basic Operation

8.4 Powering Off and Restarting the KVM

Ifitbecomesnecessarytopowero󰀨aKVMswitch,dothefollowingbeforerestartingit:

Unplug the KVM from its power source.

Shut down all computers that are attached to it.

Note: Unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the KVM will continue to

receive power from the computers.

Wait 10 seconds, then plug the KVM back into its power source.

Power on the computers.

Note: If there are stations cascaded down from the primary KVM, all the cascaded stations and the computers attached to them must

be shut down as well.

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	B024-H4U16
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	214.3 mm
Dybde:	44 mm
Højde:	432.4 mm
Vægt:	3540 g
Brugervejledning:	Ja
Produktfarve:	Sort
Indbygget skærm:	Ingen
Pakkevægt:	5620 g
Pakkedybde:	324.1 mm
Pakkebredde:	499.1 mm
Pakkehøjde:	133.1 mm
HD-type:	UXGA
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	0 - 80 %
Relativ luftfugtighed ved opbevaring (H-H):	0 - 80 %
Antal HDMI-porte:	17
HDCP:	Ja
Udgange til hovedtelefoner:	18
Skærmvisning (OSD):	Ja
Driftstemperatur (T-T):	0 - 40 °C
Maksimal opløsning:	4096 x 2160 pixel
Husmateriale:	Metal
Hurtig installationsvejledning:	Ja
Kabler inkluderet:	DC,KVM
Pakketype:	Kasse
Strømkilde:	DC
Certificering:	C-Tick; CCC; CE; China RoHS; DOE; GS; LPS; RoHS; TUV; UL; WEEE; cUL, NOM (Mexico), RoHS; CE (Europe); REACH; WEEE; FCC (USA)
DC-in-stik:	Ja
LED-indikatorer:	Ja
Udgangsspænding:	12 V
Udgangsstrøm:	5 A
Kabellængde:	1.2 m
Harmoniseret systemkode (HS):	8471.80.1000
Antal brugere:	4 bruger(e)
Bæredygtighedscertifikater:	CCC,CE,Federal Communications Commission (FCC),REACH,RoHS,WEEE
Hovedkassen højde (udvendigt):	154.9 mm
Hovedkassens længde (udvendigt):	338.1 mm
Hovedkassens bruttovægt (udvendigt):	6680 g
Hovedkassens bredde (udvendigt):	515.1 mm
Oprindelsesland:	Taiwan
Indgangsstrøm:	1.4 A
HDMI-version:	1.4
Ekstern strømadapter:	Ja
USB-stik type:	USB Type-A,USB Type-B
Produkter pr. hovedkasse (udvendigt):	1 stk
Stativ-montering:	Ja
Rack monteringskit:	Ja
Antal kontrollerede computere:	16
Tastatur porttype:	USB
Mus porttype:	USB
Video porttype:	HDMI
Lydforbindelse:	Ja
Genvejstaster:	Ja
Konsol porte:	3.5mm headphone,HDMI,USB A
Trykknap:	Ja
Antal USB 2.0 Type-B porte:	16
Rackkapacitet:	1U
USB stik:	Ja
Antal USB 2.0 type-A hub porte:	2
Gummifødder:	Ja
Antal konsol USB porte:	4
Video båndbredde:	60 Hz
Lyd kanaler:	2.1