Tripp Lite SmartRack SRLWALLSPPT18 Manual

Tripp Lite Ikke kategoriseret SmartRack SRLWALLSPPT18

Læs nedenfor 📖 manual på dansk for Tripp Lite SmartRack SRLWALLSPPT18 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
1
Installation Guide
Parts List
Assembly
1
2 3
90-Degree Wall Support Kit
Models: SRWALLSPPT12, SRWALLSPPT18
The SRWALLSPPT12 / SRWALLSPPT18 90-Degree Wall Support Kit mounts to a wall surface to support
12-inch or 18-inch cable runway.
Español 2 • Français 3 • 4Русский
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
Bracket (x1) M8 J-Bolt (x2) M8 Lock Washer (x2) M8 Hex Nut (x2)
Tripp Lite
Wall Support Kit Raceway Width Measurement A Measurement B Measurement C
SRWALLSPPT12 12” (300 mm) 14” (360 mm) 12.31” (313 mm) 10” (250 mm)
SRWALLSPPT18 18” (460 mm) 20” (510 mm) 18.31” (465 mm) 16” (410 mm)
The mounting surface must be able to safely support the
combined load of the equipment. Use appropriate fasteners
(not included) to secure the bracket to the wall. Use suitable
mounting means when installing to cinder block, concrete,
drywall or wood studs.
Cable Ladder Not Included


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: SmartRack SRLWALLSPPT18

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SmartRack SRLWALLSPPT18 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Tripp Lite Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer