Uniden 1260 Manual

Uniden Telefon 1260

Læs nedenfor 📖 manual på dansk for Uniden 1260 (1 sider) i kategorien Telefon. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
Setting Up the Caller ID Menu
IMPORTANT: Do not plug the telephone into the wall jack
while setting up the Caller ID menu because an incoming call
may invalidate the information not yet saved.
1. Place the handset in the cradle on the base.
2. Press the menu button. appears in the display. SET OR
3. Press either (+) or (-) button to scroll among the 7 menu  
screens, which are:
• SET OR
• Local Area Code (default - - -)
• Regional AC’s-1 (default - - - - - - - - -)
• CID LANGUAGE (default English)
• SELECT CONTRAST (default 3)
• T/P DIAL MODE (default tone)
• EXIT SETUP
NOTE: You may press dial anytime to exit the Caller
ID Set Up menu. If no buttons are pressed within 10
seconds, the phone automatically exits the Caller ID
Set Up menu and returns to
the NO CALLS summary screen.
Local Area Code
The telephone uses the programmed area code to determine
the number format to display when a valid Caller ID signal is
received. It is also used for the Dialback feature.
1. Press the button. appears in the display. menu SET OR
2. Press the (+) button until LOCAL AREA CODE:_ _ _ appears in
the display.
3. To enter or change the area code, press the button. The menu
display shows the area code stored in memory. The left-most
digit, or a minus sign (-)  ashes, indicating the unit is ready to
accept the area code entry.
4. Press the (+) button and select a number from 0-9 in
ascending order.
Or press the (-) button to select numbers from 9-0 in
descending order.
5. Press the menu button to advance to the next digit.
6. After the 3rd and last digits entered, press the menu button to
store the area code and go to the next setting.
NOTE: If you make a mistake, you can simply repeat
the previous steps until your area code is set.
Regional Area Codes for 10-Digit Dialing
Like the Local Area Code, the telephone uses the programmed
area codes to determine the number format to display when
a valid Caller ID signal is received. Calls that match any of the
programmed regional area codes are displayed as 10 digits. This
is helpful in areas that have multiple or overlapping area codes
and require 10-digit dialing.
1. Press the menu button. appears in the display. SET OR
2. Press the (+) button until REGIONAL AC’S-1: _ _ _ _ _ _ _
shows in the display.
3. To enter or change the area code, press the button. The menu
display shows the area code stored in memory. The left-most
digit, or minus sign (-),  ashes, indicating the unit is ready to
accept the area code entry.
4. Press the (-) button, and select a number from 9-0 for the
rst digit of the are code.
5. When the desired digit is  ashing, press the (+) button to
advance to the next digit.
6. Press the menu button again to enter the next three-digit
regional area code and repeat steps 4 and 5 until all the
REGIONAL AC’S-1 (RAC#1) and REGIONAL AC’S-2 (RAC#1)
are entered. A total of 6 sets of Regional Area Codes may be
entered.
7. Press the button to store the setting and return to the menu
REGIONAL AREA CODE display.
8. Press dial to exit.
CID Language
This setting allows you to display Caller ID display prompt
messages in English, French or Spanish.
1. Press the button. appears in the display. menu SET OR
2. Press the (+) button until CID LANGUAGE appears in the
display.
3. Press the button to show the current language setting. menu
The default is English.
4. Press the (+) or (-) button to change the language.  
5. Press the menu button to store the language and return to the
CID LANGUAGE display.
Select Contrast
This adjustment allows you to select the contrast of the display.
1. Press the menu button until appears. SET OR
2. Press the (+) button until SELECT CONTRAST appears in the
display.
3. Press the button to show the current contrast setting. menu
There are 5 levels of contrast, with the default set to 3.
4. To decrease the contrast, press (-). To increase the contrast,
press (+).
5. Press the button to store the contrast setting and return menu
to the SELECT CONTRAST display.
T/P Dial Mode
This adjustment allows you to select Tone (touch-tone) or Pulse
(rotary) dialing.
1. Press the button until appears. menu SET OR
2. Press the (+) button until appears in the T/P DIAL MODE
display.
3. Press the menu button to show the current dial mode. The
default is set to tone.
4. To change the dialing mode, press the   (+) or (-) button.
The display will alternate between the two dialing modes.
5. Press the button to store the dialing mode and return to the menu
T/P DIAL MODE display.
Exit Setup
To immediately exit the setup mode, select the EXIT SETUP menu
and press the button. menu
REMINDER: The time and date is programmed
automatically when the rst Caller ID record is
successfully received after the unit is setup.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC standards for Hearing Aid
Compatibility.
Licensing
Licensed under US Patent 6,427,009.
Introduction
CAUTION: When using telephone equipment,
there are basic safety instructions that should
always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this
product and save them for future reference.
Before You Begin
Parts Checklist
Make sure your package includes the following items:
1. Press button while the handset is still in the cradle. dial
2. Press the (+) or   (-) buttons for the desired memory
location, lift the handset and the number dials automatically.
Reviewing Numbers Stored in Memory
1. Press the button. store
2. Press 0-9 for the memory location. The number shows on the
display.
Copy Caller ID Memory to User Memory
1. Pickup the handset.
2. Press the (+) or (-) buttons to display the number you  
want to copy.
3. Press the button. store
4. Press 0-9 for the memory location. The display  ashes if the
memory location is occupied.
5. Press the store button twice to replace the new information
with the old, or press the (+) or (-) buttons to select an  
empty location. The number is automatically stored.
6. Press the hook switch to exit.
Copy Redial Memory to User Memory
1. Pickup the handset.
2. Press store.
3. Press 0-9 for the memory location. Press the   (+) or (-)
buttons to select a diff erent location. The display  ashes if the
memory location is occupied.
4. Press the store button again to con rm.
5. Press the redial store button, and then press the button again.
6. Press the ash button or the hook switch to exit.
Storing a Pause in Memory
The redial button has dual functionality. It becomes a pause but-
ton if the store button is pressed  rst. It is valid only when storing
a number into memory. Use the redial button to insert a pause
when a delay is needed in an automatic dialing sequence. For
example, when you must dial a 9 to get an outside line, or when
you enter codes to access your long distance company. You may
need to adjust the length of the pause. It can be adjusted from 1
to 9 seconds. The default setting is 4 seconds.
1. Pickup the handset.
2. Press the button. store
3. Press the button. redial
4. Press 1-9 (1 = 1 second, 2 = 2 seconds, etc.)
5. Press again. store
6. Press the ash button or the hook switch to exit.
Chain Dialing
This process allows you to dial a succession of stored numbers
from separate memory locations. This is useful when you must
dial several sequences of numbers, such as with frequent calls via
a telephone company long distance provider.
For example Memory location
Local access number of long distance company 6
Authorization code (ID) 7
Long distance phone number 8
1. Pick up the handset.
2. Press the button and then press 6. mem
3. When you hear the access tone, press the button and mem
then press 7.
4. At the next access tone, press the mem button and then 8.
TIP: Wait for the access tones before pressing the next
mem button, or your call may not go through.
Using Flash
This feature is used to activate customer calling services available
through your local phone company, such as Call Waiting. These
services generally require an extra monthly fee. If you subscribe
to any of these services, please refer to the phone company’s
instructions on how to use  ash.
To answer an incoming call while having a conversation:
• After you hear the Call Waiting tone, press and release the
ash button. The  rst call is placed on hold while the second
call can be answered.
To return to your  rst call and put the second call on hold:
• Press and release ash again. The  rst call can continue while
the second call is put on hold.
Using Temporary Tone Dialing
If you have pulse service, you can temporarily change from pulse
to tone service. After dialing the telephone number, press and
release the *tone button on the telephone. This allows access to
phone services that require a tone, such as banking and long-
distance services. After you hang up the handset, the telephone
automatically returns to pulse service.
Caller ID Display Messages
The following special messages indicate the status of a message
or the unit:
NO CALLS The caller memory is empty.
UNKNOWN NAME The incoming call does not have Caller ID
service or their service area is not linked
to yours. If the screen displays UNKNOWN
NAME along with a calling number, the
name information for that number was not
available.
Battery power level is low. Please replace
the batteries as soon as possible in order to
maintain Caller ID operation.
PRIVATE NAME The incoming caller is registered as “Private
Number” and Caller ID information is
withheld.
START/END You are at the beginning or the end of the
Caller ID memory log.
REPT Repeat call message, indicates that a new
call from the same number was received
more than once.
Equipment Approval Information
Your telephone equipment is approved for connection to the Public
Switched Telephone Network and is in compliance with parts 15 and 68,
FCC Rules and Regulations and the Technical Requirements for
Telephone Terminal Equipment published by ACTA.
1. Noti cation to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other
information, the US number and Ringer Equivalence Number (REN) for
the equipment. You must, upon request, provide this information to
your telephone company.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices ring
when your telephone number is called. In most (but not all) areas,
the sum of the RENs of all devices connected to one line should not
exceed 5. To be certain of the number of devices you may connect
to your line as determined by the REN, you should contact your local
telephone company.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the
telephone company.
• Party lines are subject to state tariff s, and therefore, you may not be able
to use your own telephone equipment if you are on a party line. Check
with your local telephone company.
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
• If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this product does not disable
your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a quali ed
installer.
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
2. Rights of the Telephone Company
Should your equipment cause trouble on your line which may
harm the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service
may be required. Where prior notice is not practicable and the
circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1)
promptly notify you of such temporary discontinuance; (2) aff ord you
the opportunity to correct the situation; and (3) inform you of your
right to bring a complaint to the Commission pursuant to procedures
set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications
facilities, equipment, operations or procedures where such action is
required in the operation of its business and not inconsistent with
FCC Rules and Regulations. If these changes are expected to aff ect
the use or performance of your telephone equipment, the telephone
company must give you adequate notice, in writing, to allow you to
maintain uninterrupted service.
Interference information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference; and (2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Privacy of Communications may not be ensured when using this product.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: • Reorient or relocate the receiving
antenna (that is, the antenna for radio or television that is “receiving” the
interference).
• Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit
diff erent from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your
dealer or an experienced radio/television technician for additional
suggestions. Also, the Federal Communications Commission has
prepared a helpful booklet, “How To Identify and Resolve Radio/TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Offi ce, Washington, D.C. 20402. Please specify stock
number 004-000-00345-4 when ordering copies.
Notice: The changes or modi cations not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Telephone Basics
Connecting the Telephone Line
1. Plug the long straight line cord into a modular wall telephone
jack.
2. Place the handset in the cradle.
NOTE: The unit is properly installed if you pick up the
handset and hear the dial tone. Otherwise, recheck all
the installation steps.
Wall Mount Installation
Your telephone may also be mounted on a wall plate (not in-
cluded).
NOTE: To prevent the handset from falling out of the
cradle while the phone is hanging on the wall, you
must reverse the handset hook (located on the base).
1. Push the handset hook up and out of the slot on the base with
your thumb, rotate the hook 180°, and replace it back in the
slot.
2. Feed the line cord through the groove and wrap the cord
around the track on the bottom of the base.
3. Feed the line cord through the groove on the opposite side of
the track, and plug the end into the modular telephone jack.
4. Slip the mounting holes (on the bottom of the base) over the
wall plate posts and  rmly slide the unit down into place.
Adjusting the Ringer Volume
You may control the ringer volume level with the switch located
on the side of the base.
Adjusting the Volume
You may control the listening level with the VOLUME switch,
which has three levels. It remains at the last level set until you
change it.
Redialing a Number
If you want to call the last number you dialed again (up to 32
digits), use the redial feature.
1. Pick up the handset.
2. Press the button. redial
3. The last number called is automatically redialed.
Using One Touch Redial
If the last call you dialed was busy, you can redial it immediately
by just pressing the redial button and without hanging up the
handset.
Caller ID (CID)
IMPORTANT: In order to use this unit’s Caller ID
features, you must subscribe to either the standard
Name/Number Caller ID Service or Call Waiting Caller
ID Service. To know who is calling while you are on the
phone, you must subscribe to Call Waiting Caller ID
Service.
This unit receives and displays information transmitted by your
local phone company. This information can include the phone
number, date, and time; or the name, phone number, date, and
time.
Call Waiting Caller ID
Provided you subscribe to Call Waiting Caller ID service form
your phone company; if you receive an incoming call and you
are using Uniden’s multi handset system, a beep indicates the
presence of a Call Waiting call on the line. The Call Waiting Caller
ID information will be displayed and stored in the history of all
handsets in the system.
• When you hear the call waiting beep in the handset receiver,
press the ash button to put the current call on hold and
answer the incoming call. Press ash again to return to the
original call.
Receiving CID Records
When you receive a call, the Caller ID information is transmitted
between the  rst and second ring. The Caller ID information
appears on the display while the phone rings, giving you a
chance to monitor the information and decide wheather or not to
answer the call.
Storing CID Records (In CID Memory)
If you are not at home or cannot answer, your telephone’s Caller
ID memory stores the data for the 50 most recent calls you
received so you can see who called while you were unavailable.
When the 51st call is received, the oldest Caller ID record (1st call)
is automatically deleted.
You may review the stored information at any time. Calls received
since your last review show as NEW in the display. Calls that have
not been previously reviewed but were received from the same
number more than once show as REPT in the display.
Reviewing CID Records
As calls are received and stored, the display is updated to let you
know how many calls have been received. To scroll CID records:
1. Press either the (+) or   (-) down button to view the
newest call record.
2. Press the (-) button to scroll through the call records from
the most recent to the oldest.
3. Press the (+) button to scroll through the call records from the
oldest to the newest.
4. When all of the messages have been viewed, START/END
appears in the display.
Deleting CID Records
• To delete the record showing in the display, press the delete
button once.
• To delete all records while reviewing, press and hold the
delete button until shows in the display, then ERASE ALL?
press the button again to con rm. delete
Dialing Back
When reviewing Caller ID records, you may dialback the phone
numbers
shown on the display by pressing the dial button.
NOTE: Depending on (a) how the incoming caller’s
phone number is formatted when it is received, and
(b) whether or not you previously pre-programmed
your local area code into the set up menu, you may
need to adjust the format of the incoming caller’s
stored phone number before making the call, press
the dial button to adjust the number, and try again.
If you programmed your local area code in the setup menu
1. Use the   (+) and (-) buttons to scroll to the number you
want to dial.
• If you see a number with 7 digits (i.e. 555-1234), then the call
was received from within your area code. However, this does
not guarantee the call is a local call.
• If you see a number with 11 digits (i.e. 1-234-555-1234), then
the call received was not from your area code.
2. Press the button and the display shows or dial PICKUP ADJUST.
A 10 second timer also starts in the upper right side of the
display, letting you know the time remaining until the unit
returns to the Summary Screen. If you adjust the number to be
dialed, the timer automatically resets itself.
3. To adjust the phone number, press the dial button. For
instance, a 7-digit local number sometimes cannot be dialed
because it requires a 10-digit or 11-digit format. Press the dial
button repeatedly to scroll through the 7, 10, and 11-digit
numbers.
7-digits: 7-digit telephone number (i.e.
555-5555)10-digits:
3-digit area code + 7-digit telephone number
(i.e. 425-555-5555)
11-digits: long distance code 1 + 3-digit area code +
7-digit telephone number
(i.e. 1-425-555-5555)
4. To dial the displayed number, pick up the handset before the
timer reaches 0. NOW DIALING shows in the display and the
number is dialed.
If you did not program your local area code in the setup menu
1. Use the   (+) and (-) buttons to display the number you
want to dial.
You will only see 10-digit numbers (i.e. 234-555-1234).
2. See steps 2 through 4 in the above section to complete the
dialback sequence.
NOTE: If PICKUP PHONE shows on the display, no other
changes to the number can be made. The information
sent from the telephone company is known to be a
valid number to dial back (available only in limited
areas). Once you pickup the phone, the number is
automatically dialed.
Memory
Before you store a telephone number in memory, make sure the
dialing mode is correctly set for the type of service you have. The
default dialing mode is tone (touch-tone), so if you have pulse
(rotary) service, you must  rst change the dialing mode. See “T/P
Dial Mode.”
Storing Frequently Called Numbers
1. Pick up the handset.
2. Press the store button.
3. Push the desired memory location button (0-9).
4. Press the store button.
5. Use the handset number keys to enter the telephone number
(up to 16- digits) and press the store button.
6. Hang up the handset.
NOTE: If you make a mistake, use the delete button to
delete wrong digits.
Changing a Stored Number
Repeat the storage sequence above. The new number replaces
the old number at the memory location.
Erasing a Stored Number
1. Pick up the handset.
2. Press the button. mem
3. Press the (+) or   (-) buttons for the desired memory loca-
tion to be erased.
4. Press and hold delete for three seconds until the number in
the display is erased.
5. Hang up the handset.
NOTE: If you want to erase more than one location,
use the (+) or arrow buttons to scroll to each (-)
memory location you want to erase.
Dialing Frequently Called Numbers
1. Pick up the handset and press the mem button.
2. Press 0-9 for the memory location. The number dials
automatically.
OR
1. Pick up the handset and press the dial button.
2. Press the (+) or   (-) buttons for the desired memory
location.
3. Press the button to dial the number. dial
OR
Model 1260
Printed in China
Uniden America Corporation
Ft. Worth, TX
Model 1260 Slimline
Memory phone
User’s guide
Modular
telephone
line jack
Wall plate
Telephone Jack Requirements
To use this phone, you need an RJ11C type
modular telephone jack, which might look like
the one pictured here, installed in your home.
If you don’t have a modular jack, call your
local phone company to  nd out how to get
one installed.
Important Installation Information
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
speci cally designed for wet locations.
• Never touch non-insulated telephone wires or terminals,
unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
Handset Layout
SE E M ARKIN G ON BOTTOM / B A CK OF PR ODU CT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VO AGE” INSIDELT
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK ELECTRIC HOCK, OF S DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE ARTS NSIDE.P I
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
CAUTION:
Visit our Website at : www.uniden.com
= ringer tone will be loud
= ringer tone will be low
= telephone will not ring
Name of Store
Purchase Date
CALL WAITING
If you subscribe to Call Waiting
Caller ID Service, this icon
ashes when you receive a call while you
are on the phone.
Installing and Replacing the Batteries
IMPORTANT: You will have approximately 60 seconds
to replace the batteries before the memories stored
in the handset are lost. Please read the instructions
before replacing the batteries and have the batteries
ready to be inserted beforehand. As a precaution, you
may want to write down any stored information you
do not want erased.
Your Caller ID phone uses 3 AA-size alkaline batteries for
receiving and storing Caller ID records and for the numbers you
use for memory dialing.
1. If the telephone line cord is connected, disconnect it from the
wall.
2. Open the battery compartment door with your nger or
thumb.
3. Insert 3 AA-size alkaline batteries (not included) as shown on
the diagram inside the compartment.
4. Replace the battery compartment door.
5. Re-attach the line cord to the wall and check your memory
locations. If installation takes longer than 60 seconds, you
should re-set your memory locations.
IMPORTANT: If you’re not going to use the telephone
for more than 30 days, remove the batteries because
they can leak and damage the unit.
NEW Indicates call of calls have not been
reviewed.
Troubleshooting Tips
No Dial Tone
• Check all cabling to make sure that all connections are secure
and not damaged.
• Check hook switch: Does it fully extend when handset is lifted
from cradle?
No Display
• Replace the batteries.
• Make sure the batteries are properly installed.
No Information is shown after the phone rings
• In order to receive Caller ID records, you must subscribe to the
standard name and number Caller ID service available through
your local telephone company.
• Be sure to wait until the second ring before answering.
Phone does not ring
• Make sure ringer switch is set tothe or .
• You may have too many extension phones on your line. Try
unplugging some extension phones.
• Check for dial tone. See Troubleshooting Tips for No Dial Tone.
Other parties cannot hear you
• Make sure phone cord is securely plugged in.
• Make sure extension phones are on the hook at the same time
you’re using the phone. It’s normal for the volume o drop t
when additional extension phones are used at the same time.
Cannot dial out
• Make sure the T/P dialing mode is set to the type of phone
service you are subsc ed to.rib
Service
If trouble is experienced with this equipment, for repair or
warranty information, please contact customer service at 1-800-
297-1023. If the equipment is causing harm to the telephone
network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
This product may be serviced only by the manufacturer or
its authorized service agents. Changes or modi cations not
expressly approved by Uniden America Corporation could void
the user’s authority to operate this product. For instructions on
how to obtain service, refer to the warranty included in this guide
or call customer service at 1-800-297-1023.
Or refer inquiries to:
Uniden America Service
4700 Amon Carter Blvd.
Forth Worth, TX 76155
Attach your sales receipt to the booklet for future reference or jot
down the date this product was purchased or received as a gift.
This information will be valuable if service should be required
during the warranty period.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the applicable Industry Canada
Terminal Equipment Technical Speci cations. This is con rmed
by the registration number. The abbreviation, IC, before the
registration number signi es that registration was performed
based on a Declaration of Conformity indicating that Industry
Canada technical speci cations were met. It does not imply that
Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal
equipment is marked on the equipment itself. The REN assigned
to each terminal equipment provides an indication of the
maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed  ve.
One-year limited warranty
IMPORTANT: Evidence of original purchase is required for
warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION
(“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one
year, to the original retail owner, this Uniden Product to be
free from defects in materials and craftsmanship with only the
limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further eff ect 12 months after the date
of original retail sale. The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modi ed, altered, or used as part of any conversion kits,
subassemblies, or any con gurations not sold by Uniden, (C)
improperly installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for a defect
or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or programmed
by anyone other than as detailed by the owner’s manual for this
product.
STATEMENT OF REMEDY: In the event that the product does
not conform to this warranty at any time while this warranty
is in e ect, warrantor will either, at its option, repair or replace
the defective unit and return it to you without charge for parts,
service, or any other cost (except shipping and handling)
incurred by warrantor or its representatives in connection with
the performance of this warranty. Warrantor, at its option, may
replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF
AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
Some states do not allow this exclusion or limitation of incidental
or consequential damages so the above limitation or exclusion
may not apply to you.
LEGAL REMEDIES: This warranty gives you speci c legal rights,
and you may also have other rights which vary from state to
state. This warranty is void outside the United States of America
and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF
WARRANTY: If, after following the instructions in the owner’s
manual you are certain that the Product is defective, pack the
Product carefully (preferably in its original packaging). The
Product should include all parts and accessories originally
packaged with the Product. Include evidence of original purchase
and a note describing the defect that has caused you to return
it. The Product should be shipped freight prepaid, by traceable
means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
Handset Back volume
switch
display
menu
(button)
delete
(button)
dial (button)
*tone
(button)
mem
(memory button)
 (+)/ (-)
(buttons)
store
(button)
ash
(button)
redial (button)
Ringer
Volume
Battery compartiment
New calls
Current time Current date
Caller ID
number
Caller ID
name

Produkt Specifikationer

Mærke: Uniden
Kategori: Telefon
Model: 1260

Har du brug for hjælp?

Hvis du har brug for hjælp til Uniden 1260 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Telefon Uniden Manualer

Uniden

Uniden XDECT 6105BTU Manual

10 Oktober 2024
Uniden

Uniden SSE P1 Manual

2 Oktober 2024
Uniden

Uniden EXA 7950 Manual

1 Oktober 2024
Uniden

Uniden D1880 Manual

27 September 2024
Uniden

Uniden EXI 7960 Manual

20 September 2024
Uniden

Uniden EZAI 2997 Manual

19 September 2024
Uniden

Uniden EXI 4561 Manual

17 September 2024
Uniden

Uniden XC 800 Manual

16 September 2024
Uniden

Uniden EXI 8560 Manual

13 September 2024
Uniden

Uniden D1785-2T Manual

9 September 2024

Telefon Manualer

Nyeste Telefon Manualer

Plantronics

Plantronics Practica T110 Manual

16 November 2024
Amplicomms

Amplicomms BigTel 1580 Combo Manual

15 November 2024
Doro

Doro 2880 Manual

14 November 2024
Doro

Doro 1880 Manual

14 November 2024
Lively

Lively Mobile+ Manual

13 November 2024
LG

LG Fino Dual Manual

20 Oktober 2024
Profoon

Profoon PDX-7020 Manual

14 Oktober 2024
Profoon

Profoon PDX-100 Manual

14 Oktober 2024
OnePlus

OnePlus 9RT 5G Manual

8 Oktober 2024
Profoon

Profoon PDX-1520 Manual

6 Oktober 2024