V-TAC VT-11108 Manual

V-TAC Lys VT-11108

Læs nedenfor 📖 manual på dansk for V-TAC VT-11108 (2 sider) i kategorien Lys. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
SOLAR LED FLOODLIGHT
INTRODUCTION & WARRANTY
INSTALLATION DIAGRAM
TWO OPTIONAL WORKING MODES
FEATURES
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. This
product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
NOTICE & WARNING
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up automatically at dusk.
4. Recommended installation height is 3~4Mtr.
5. The lamp is equipped with an internal battery pack, which is replace-
able.
If any need, please contact seller for correct new battery pack.
6. Please connect the lamp to solar panel to get solar charging.
7. Built-in intelligent IC is with over-charge, over-discharge protection,
safe and durable.
8. Non-professionals please do not disassemble the lamp.
9. Please do not dispose the battery with household garbage to avoid
explosion.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
TECHNICAL DATA:
MODE A:
MODE B:
MODEL VT-11108
LUMENS 950LM
WATTS 8W
NO. OF LEDs 64 PCS
BATTERY TYPE 
BEAM ANGLE 120°
SENSING RANGE 
CHARGING TIME 
WORKING TIME 
MATERIAL ABS+PC
Solar Powered Auto On/Off Two Work Modes Cordless to Install
Ultra-thin Foldable Adjustable 8 in 1 Multi Functions
1PC * Lamp 2PCS * Screws with
Flat & Spring Washers
(for Wall Mount
2PCS * Screws
(for Hanging)
2PCS * Stickers 1PC * User Manual
User Manual
Patent Design
8-in-1
20
PAP
On/Off/Select working mode
Please rotate the lamp head and press the button to select working mode.
1. Press the button 1st time, lamp turns on to Mode A.
2. Press the button 2nd time, lamp shines once and turns to Mode B.
3. Press the button 3rd time, lamp turns off.
When battery power is more than 30% :
When battery power is less than 30% :
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range ≤8mtrs, then dim
to lower brightness after 20 seconds
of no motion.
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range ≤8mtrs, then turns
off after 20 seconds of no motion.
120° 120°
120° 120°
Lamp automatically lights up at night and keep 100% brightness, after 5 hours or when battery power is less
than 30%, lamp turns to Energy Saving Mode: Lamp automatically turns to 100% brightness when motion is
detected in the range ≤8mtrs, then turns off after 20 seconds of no motion.
After 5 hours or when the battery
power is less than 30%
120°
KIND REMIND:
When the lamp is not connected to the solar panel, the light sensor is disabled. Whether it is day
or night, the lamp will stay on after it is turned on.
INSTALLATIONS:
180°
18
36
Rotate the lamp head to adjust lighting directions, 180° adjustable.
Rotate the screw to adjust solar panel vertically, 180° adjustable.
Hold the lamp base and rotate the lamp post to adjust whole lamp angle, 360° adjustable.
INSTALLATION B: SPLIT WALL MOUNT
INSTALLATION C: LAMP WALL MOUNT WITH MAGNET
INSTALLATION D: LAMP WALL MOUNT WITH STICKER
MORE OPTIONAL INSTALLATION
INSTALLATION E: LAMP WALL MOUNT WITH SCREWS
INSTALLATION E: PILLAR MOUNT
PORTABLE LAMP
WIDE APPLICATIONS:
1. Integrated wall mount for garden, entrance, garage, courtyard, fence, campus etc.
2. Split wall mount for roof, corner, pathway, bus station, attic, pavilion etc.
3. Hanging for balcony light, emergency light etc.
4. Portable as flash light, camping light, emergency use etc.
5. Standable as work light, pillar light, ground light, wall washer light etc.
6. It can be magnetized on any flat metal surface for flexible use.
7. Lamp can be sticked directly for flexible use.
INSTALLATION A: INTEGRATED WALL MOUNT
The recommended mounting height is 2-4Mtrs.
Drill 2 holes (φ6mm, depth 50mm) with a spacing of 58mm.
Fix the expansion plugs in the holes.
Use screws with flat & spring washers to fix the lamp on the wall. Adjust solar panel angle and lighting
direction as needed.
Depth:
50mm
φ6mm
58mm
① ②
Drill 2 holes (φ6mm, depth 50mm) with a spacing of height 58mm.
Fix the expansion plugs in the holes.
Use screws with flat & spring washers to fix the lamp on the wall.
Drill 2 holes (φ6mm, depth 50mm) with a spacing of width 120.3mm.
Fix the expansion plugs in the holes, then fix the screws into the expansion plugs, keeping the screws
protruding 3-5mm.
Hang the lamp on the screws.
Connect the cable of the solar panel to the lamp.






• To charge the lamp, connect the cable of the solar panel to the lamp
• Sensor will not work if the lamp is not connected in solar panel



• To charge the lamp, connect the cable of the solar panel to the
lamp
• Sensor will not work if the lamp is not connected in solar panel




• To charge the lamp, connect the cable of the solar
panel to the lamp
• Only PIR Sensor will work if the lamp is not connected
to the solar panel
Drill 2 holes (φ8mm, depth 50mm) with a spacing of 120.3mm.
Fix the expansion plugs in the holes.
Use screws with flat & spring washers to fix the lamp on the ground. Adjust solar panel angle and lighting
direction as needed.





• To charge the lamp, connect the cable of the solar panel to the lamp
• Sensor will not work if the lamp is not connected in solar panel
The connection cable is 3m long, please confirm the installation
position of the solar panel and the lamp before installation.
The lamp head can be removed according to the arrows on the
side of the lamp for split installation.
Depth:
50mm
φ6mm
58mm
120.3mm
3-5mm
Metal flat surface
③ ④
Depth:
50mm
Depth:
50mm


MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-11108

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-11108 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys V-TAC Manualer

V-TAC

V-TAC VT-25W Manual

18 November 2024
V-TAC

V-TAC VT-80024 Manual

5 November 2024
V-TAC

V-TAC VT-15021 Manual

2 September 2024
V-TAC

V-TAC VT-12021 Manual

2 September 2024
V-TAC

V-TAC VT-12020 Manual

2 September 2024
V-TAC

V-TAC VT-16011 Manual

2 September 2024
V-TAC

V-TAC VT-16010 Manual

2 September 2024
V-TAC

V-TAC VT-6139 Manual

18 August 2024
V-TAC

V-TAC VT-6072 Manual

18 August 2024
V-TAC

V-TAC VT-6076S Manual

18 August 2024

Lys Manualer

Nyeste Lys Manualer

Nicols

Nicols BSW 10R Manual

23 November 2024
Nicols

Nicols BSW 200 LED Manual

22 November 2024
Aputure

Aputure LS 600C Pro Manual

19 November 2024
Neno

Neno Titto Manual

19 November 2024
Yongnuo

Yongnuo YN508 Manual

17 November 2024
Eurolite

Eurolite PAR-30 Manual

17 November 2024