Vermona Modular TAI-4 Manual

Vermona Modular Ikke kategoriseret TAI-4

Læs gratis den danske manual til Vermona Modular TAI-4 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Vermona Modular TAI-4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
TAI-4
Owner's Manual
Introduction
Modular systems are just amazing. They are whatever you want them to be, as you
are the one who's responsible for the number and kind of installed modules. It can
be either a simple monophonic synthesizer or an extremely complex sound- and
e ect machine.!
The TAI-4 is an audio interface for your modular system that brings the internal
audio signals out of the system as well as external audio sources into the modular
system. We are aware of the fact that many modules already have audio in- and
outputs, so what's the reason behind making a special module with this
functionality?
Each of the TAI-4s in- and output channel uses an audio transformer that
galvanically isolates and balances the audio signal. Thus potential ground loops
were prevented, the signal stays clear of electro-magnetic interferences. The
TAI-4 should be the module of choice whenever you need to handle high-quality
audio signals.
We are proud to welcome you as VERMONA TAI-4 user. Enjoy the module and be
happy whenever using it during music production and performances.
Your VERMONA team
HDB electronic GmbH
Badesteig 20
08265 Erlbach
GERMANY
Phone: +49 37422 25 30
Fax: +49 37422 23 97
Email: info@vermona.com
http://www.vermona.com
- 1 -
Installation
The TAI-4 is compatible to eurorack modular systems and has to be connected to
the A-100 system bus for operation.
Follow instructions inthe safety and warnings stated your A-100s
manual when installing the module.
Before installing the to themodule be sure disconnect modular
system from mains!
• Connect the 10-pin connector on the TAI-4s rear to the ribbon cable that comes
with the TAI-4. The color marked stripe on the cable is oriented to the bottom.
(see illustration 1)
• Connect the other end of the ribbon cable to the 16-pin connector on the
eurorack style power distribution board of your modular system. The colored
stripe has to be oriented to the negative 12 volt supply line (bottom).
• Use the screws that came with your TAI-4 to mount the module into the modular
frame.
• Now connect the modular system to the mains and switch it on.
Illustration 1: Connecting the TAI-4 to the system bus
Owner's Manual VERMONA TAI-4 - transformer-isolated audio interface
- 2 -

Produkt Specifikationer

Mærke: Vermona Modular
Kategori: Ikke kategoriseret
Model: TAI-4

Har du brug for hjælp?

Hvis du har brug for hjælp til Vermona Modular TAI-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Vermona Modular Manualer

Vermona Modular

Vermona Modular TAI-4 Manual

22 August 2024
Vermona Modular

Vermona Modular qMI2 Manual

22 August 2024
Vermona Modular

Vermona Modular fourMulator Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Marvel

Marvel MV-AL-SP-AI Manual

5 Juli 2025
Kendall Howard

Kendall Howard 1916-2-101-03 Manual

5 Juli 2025
Milwaukee

Milwaukee M18 HKP Manual

5 Juli 2025
Sage

Sage the Smart Oven Pizzaiolo SPR700 Manual

5 Juli 2025
Scotsman

Scotsman Prodigy Elite MC1030 Manual

5 Juli 2025
Kohler

Kohler K-7131 Manual

5 Juli 2025
Livn

Livn Plus 300 Manual

5 Juli 2025
Pfister

Pfister Lita GT533-PFBG Manual

5 Juli 2025
Elco

Elco Polywarm-Maxi PWC1 Manual

5 Juli 2025
Livarno Lux

Livarno Lux LWS 1.5 A1 Manual

5 Juli 2025