Viewsonic PJ-WMK-304 Manual


Læs nedenfor 📖 manual på dansk for Viewsonic PJ-WMK-304 (2 sider) i kategorien videoprojektorer. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
PJ-WMK-304
Quick Start Guide
Important Safety Informa�on
中国
http://www.viewsonic.com.cn
电话:4008 988 188
香港
http://www.hk.viewsonic.com
電話:852 3102 2900
澳門
http://www.hk.viewsonic.com
電話:853 2833 8407
台灣
http://www.viewsonic.com.tw
電話:0800 899 880
한국
http://ap.viewsonic.com/kr/
Phone: 080 333 2131
Singapore/Malaysia/Thailand
http://www.viewsonic.com.sg
Phone: 65 6461 6044
India
http://www.in.viewsonic.com
Phone: 1800-419-0959
United States
http://www.viewsonic.com
Phone: 1-800-688-6688
Canada
http://www.viewsonic.com
Phone: 1-866-463-4775
Europe
http://www.viewsoniceurope.com
http://www.viewsoniceurope.com/uk/support/call-desk/
Australia/New Zealand
http://www.viewsonic.com.au
Phone: 1800 880 818 (AUS)
0800 008 822 (NZ)
South Africa
http://ap.viewsonic.com/za/
Latin America (Chile)
http://www.viewsonic.com/la/
http://www.viewsonic.com/la/soporte/servicio-tecnico
Latin America (Mexico)
http://www.viewsonic.com/la/
http://www.viewsonic.com/la/soporte/servicio-tecnico
Latin America (Peru)
http://www.viewsonic.com/la/
http://www.viewsonic.com/la/soporte/servicio-tecnico
Latin America (Argentina)
http://www.viewsonic.com/la/
http://www.viewsonic.com/la/soporte/servicio-tecnico
Puerto Rico & Virgin Islands
http://www.viewsonic.com
Phone: 1-800-688-6688 (English)
http://www.viewsonic.com/la/soporte/servicio-tecnico
PJ-WMK-304_QSG_Rev. 1c 12-10-20
Copyright © 2021 ViewSonic Corporation. All rights reserved.
1. 
2. For safety reasons, please make sure the wall is strong enough to sustain the weight of the
projector & wall mount.
3. The total maximum weight of all items mounted should NEVER exceed the weight capacity: 55 lbs
(25kg).
4. 
5. 
chance of impact.
6. 
excessively dusty place.
7. Use the supplied accessories only. Use of accessories other than those supplied may result in
damage to the projector and/or projector wall mount.
8. Unplug the AC power cord and any other connected cables before dismounting the projector from
the projector wall mount.
9. Do not hit or hang any heavy objects on the projector wall mount. If the projector wall mount is
damaged, stop using immediately and contact a qualified service personnel immediately.
10. Only install the projector wall mount horizontally on the level surfaces.
* The manufacturer is not liable for any damages or injury caused by mishandling or improper
installa�on.
11. The projector or wall mount may fall and cause personal injury. Ensure screws are tightened to the
proper torque after installation and any adjustments. Do not overtighten screws as this may cause
screw deformation.
12. This wall mount kit ONLY supports ViewSonic® projectors and models that are designated by
ViewSonic. Use with non-ViewSonic branded projectors or exceeding the weight capacity is
neither supported nor recommended, may cause property damage or personal injury, and shall be
at the sole risk of users/installers.
Checking The Supplied Accessories
Setting The Projector Wall Mount On The Wall
The bracket is suitable for concrete wall mounting or wooden stud wall.
Concrete wall mounting thickness must be a minimum 4” (100mm). Anchor bolt and
screw (M6 × 55) are needed to be used for concrete wall installation.
Dry-wall wall thickness must be a minimum 4.5” (114mm). Only screw (M6 × 55) is
needed to be used for installation, and gypsum board thickness less than 0.59"
(15mm).
If the wall is not strong enough, reinforce it sufficiently before installation.
Please contact reseller if you have any questions about mounting surface issue.
Adjusting The Image Height Adjusting The Horizontal Rotation
Adjusting The Vertical Tilt Placing The Decorative Cover
Product InformationAdjusting The Horizontal Roll
Note: When all adjustments are completed, the wall plate covers can be used to cover
the blank area on the top of wall plate. Finally, put the wall cover on.
1
2
3
5
47
8
6
Projector Mounting
Plate X 1
A
B
C
D
E
F
G
H
I
Projector Mounting
Arms x4
Fixed Support Arm x1
Wall Plate x1
Wall Cover x1 Wall Plate Cover x1
Loosen the screw
Take off the cap
A
A
B
B
Tighten the screw G when
the height is determined.
CG
Slide the mounting plate
A
B
Slide the mount
Slide the mount to
adjust the image size
The cable
Loosen the screws with L3 allen wrench,
pull out the support arm around 4'' (100mm) The cables can be got thr ough the wall plate
The cables
CG
The cables
C
>55mm
B
Concrete wall mounting With anchor bolt
>55mm
Ø3mm
Dry-wall mounting Without anchor bolt
Ø10-11mm
(2.17")
(0.39"-0.43")
(2.17")
(0.12")
When installation on the
wood stud wall, Align the
center of the wall mount
plate with the center of
the stud.
screw central point
screw (M6 x55) are needed
for installation in dry-wall mounting
C
A A
The arrows up The arrows up
screw (M6 x55) are needed
for installation in concrete wall mounting
Installing The Projector On The Projector Wall Mount
A
Screen
Adjustment
Direction
B
A
B
A
Screen
B
Adjustment
Direction
to see the distance from
wall to the mounting plate
Check the scale plate
Screen Adjustment Direction
Vertical Tilt Knob
D
G
AB
AB
AB
Screen Adjustment Direction
Screen Adjustment Direction
A
B
Horizontal Roll Knob
Horizontal Rotation Knob
1
2
3
4
or
1
1
2
1
2
3
9.9 lb (4.5 kg)
PJ-WMK-304
Model
Net Weight
Weight Capacity
Extendable Length
Adjustment Angle
55lb (25.0 kg)
14.4"-25"(365-635mm)
Vertical tilt, Horizontal roll, Horizontal rotation ±5°
Adjusting The Image Size
E
I
F
F
H
E
E
Use
Connecting
screws I
M6
M4
Screw E & I Tightening torque: 8kgf-cm ( 12kgf-cm)
Screw hole
on projector
(Optional for M6
hole on projector)


Produkt Specifikationer

Mærke: Viewsonic
Kategori: videoprojektorer
Model: PJ-WMK-304
Vægt: 4536 g
Produktfarve: Hvid
Monteringstype: Væg
Harmoniseret systemkode (HS): 83024190
Kompatible produkter: LS810, LS820, LS830, PX800HD, PS700X, PS700W
Maksimal vægtkapacitet: 25 kg
Teleskopisk: Ja
Afstand til væggen (min.): 366 mm
Afstand til væggen (maks.): 635 mm
Justerbar arm: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Viewsonic PJ-WMK-304 stil et spørgsmål nedenfor, og andre brugere vil svare dig




videoprojektorer Viewsonic Manualer

videoprojektorer Manualer

Nyeste videoprojektorer Manualer

AOpen

AOpen AV10 Manual

21 November 2024
AOpen

AOpen AH15 Manual

21 November 2024
AOpen

AOpen PV10 Manual

21 November 2024
AOpen

AOpen PV11 Manual

21 November 2024
AOpen

AOpen AV10a Manual

21 November 2024
AOpen

AOpen PV11a Manual

21 November 2024
AOpen

AOpen QF13 Manual

21 November 2024
AOpen

AOpen QF16ATV Manual

21 November 2024
AOpen

AOpen QF18s Manual

21 November 2024
AOpen

AOpen QH15s Manual

21 November 2024