Vimar 19295.AC.B Manual


Læs nedenfor 📖 manual på dansk for Vimar 19295.AC.B (4 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
49401520B0 02 2107
EIKON
20295.AC
20295.CC
ARKE'
19295.AC-19295.AC.AB
19295.CC
PLANA
14295.AC
14295.CC
USB 5 V 3 A power supply unit for electronic devices, with outputs that pro-
vide altogether 3 A optimised to charge a device up to 3 A (e.g. tablet) or two
devices simultaneously (e.g. tablet, smartphone), 120-240 V~ 50/60 Hz power
supply, grey - 2 modules.
Art. 20295.AC-19295.AC-19295.AC.AB-14295.AC: 1 USB type A output and 1 type C
fast charge output.
Art. 20295.CC-19295.CC-14295.CC: 2 USB type C fast charge outputs.
The solution combined with the Ar residential series is also available in antibacterial
version (art. 19295.AC.AB). The antibacterial treatment ensures full hygiene thanks to the
action of the silver ions (AG+), which prevent the formation and spread of germs, bacteria,
viruses and fungi. To maintain the hygiene and effectiveness of its antibacterial action, clean
the product regularly.
The device should be used to charge mobile phones and all electronic devices that can be
charged from any standard USB type A and/or type C socket outlet.
Read the instructions before installation and/or use.
FEATURES.
Power supply: 120-240 V~ 50/60 Hz
Power consumption: 290 mA at 120 V~ and 180 mA at 240 V~
Output voltage: 5.0 V d.c. 5%) ES1 and/or SELV
Max output load: 3 A
Output power: 15.0 W
Average efficiency in active mode: 82.5%
Efficiency with low load (10%): 81.0%
Power with no load: 0.03 W
Protection degree: IP20
Operating temperature: C to +35°C (indoor use)
Device in class II
Installation for CAT III overvoltage category
OPERATION.
Type C fast charge outputs are designed to charge more powerful devices at high speed as
well by providing up to (they are therefore available up to 15 W).3 A on each individual output
The power supply unit, which is equipped with USB outputs, is optimised to charge one two
device up to 3 A (e.g. tablet or PC) or two devices simultaneously provided their total absorp-
tion does not exceed 3 A (e.g. smartphones). Always check the data plate on the device you
are charging.
The following table contains some examples and possible combinations:
INSTALLATION RULES.
Installation must be carried out by qualified persons in compliance with the current regulations
regarding the installation of electrical equipment in the country where the products are installed.
The device can be installed in a flush mounting box or surface mounting box and completed
with Eikon, Arké, or Plana cover plates in dust-free places, protected from accidental impacts
and away from heat sources.
Installation must respect the direction of the arrow engraved on the power supply
unit .
IMPORTANT.
• An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must
be installed upstream from the power supply.
Install the device at a height of no more than 2 m.
The length of the connection cable to the electronic device must be no more than 3 m.
The power supply unit is protected internally against overloads.
Cable stripping 6 mm
REGULATORY COMPLIANCE.
LV Directive. EMC directive. RoHS directive. ErP directive.
Standards EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 50581.
(EU) Regulation for external power supply units no. 2019/1782.
REACH (EU) Regulation no. 1907/2006 Art.33. The product may contain traces of lead.
Alimentatore USB 5 V 3 A per dispositivi elettronici, con uscite che erogano
complessivamente 3 A ottimizzate per caricare un dispositivo fino a 3 A (es
tablet) o contemporaneamente due dispositivi (es. tablet, smartphone), ali-
mentazione 120-240 V~ 50/60 Hz, grigio - 2 moduli.
Art. 20295.AC-19295.AC-19295.AC.AB-14295.AC: 1 uscita USB tipo A e 1 uscita USB
tipo C fast charge.
Art. 20295.CC-19295.CC-14295.CC: 2 uscite USB tipo C fast charge.
La soluzione abbinata alla serie civile Arké è disponibile anche in versione antibatterica (art.
19295.AC.AB). Il trattamento antibatterico garantisce l’igiene del prodotto tramite l’azione
di ioni di argento (AG+) e previene la formazione e la proliferazione di germi, batteri, virus
e funghi. Affinché l’azione antibatterica sia efficace e per il mantenimento dell’igiene si
raccomanda di procedere con la normale e regolare pulizia del prodotto.
Il dispositivo va utilizzato per ricaricare i telefoni cellulari e tutti gli apparecchi elettronici che
offrono la possibilità di ricarica da una qualsiasi presa standard USB di tipo A e/o di tipo C.
Leggere le istruzioni prima dell’installazione e/o utilizzo.
CARATTERISTICHE.
Alimentazione: 120-240 V~ 50/60 Hz
Consumo: 290 mA a 120 V~ e 180 mA a 240 V~
Tensione di uscita: 5,0 V d.c. (± 5%) ES1 e/o SELV
Carico max in uscita: 3 A
Potenza di uscita: 15,0 W
Rendimento medio in modo attivo: 82,5%
Rendimento a basso carico (10%): 81,0%
Potenza a vuoto: 0,03 W
Grado di protezione: IP20
Temperatura di funzionamento: 0 °C - +35 °C (uso interno)
Apparecchio di classe II
Installazione per categoria di sovratensione CAT III
FUNZIONAMENTO.
Le uscite di consentono di ricaricare velocemente anche i dispositivi più fast charge tipo C
potenti erogando fino a (sono quindi disponibili fino a 15 W).3 A su singola uscita
L’alimerntatore, dotato di uscite USB, è ottimizzato per caricare un dispositivo fino a 3 due
A (es. Tablet, PC) o due dispositivi contemporaneamente purchè il loro assorbimento totale
non superi i 3 A (es. smartphone). Verificare sempre i dati di targa del dispositivo da ricaricare.
Alcuni esempi e combinazioni possibili sono riportati nella seguente tabella:
REGOLE DI INSTALLAZIONE.
L’installazione deve essere effettuata da personale qualificato con l’osservanza delle dispo-
sizioni regolanti l’installazione del materiale elettrico in vigore nel paese dove i prodotti sono
installati. L’apparecchio deve essere installato in scatole da incasso o da parete con supporti
e placche Eikon, Arké o Plana in luoghi non polverosi, protetto da urti accidentali e lontano
da fonti di calore.
L’installazione deve essere eseguita rispettando il verso della freccia incisa sull’a-
limentatore.
IMPORTANTE.
A monte dell’alimentatore deve essere installato un interruttore onnipolare di sezionamento
facilmente accessibile con distanza fra i contatti di almeno 3 mm.
Installare il dispositivo ad una altezza inferiore a 2 m.
La lunghezza del cavo per il collegamento al dispositivo elettronico deve essere inferiore a
3 m.
Lalimentatore è protetto internamente contro i sovraccarichi.
Spellatura cavo 6 mm
CONFORMITÀ NORMATIVA.
Direttiva BT. Direttiva EMC. Direttiva RoHS. Direttiva ErP.
Norme EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 50581.
Regolamento alimentatori esterni (UE) n. 2019/1782
Regolamento REACh (UE) n. 1907/2006 art.33. Il prodotto potrebbe contenere tracce di
piombo.
DISPOSITIVI
RICARICABILI
TABLET 10” TABLET FINO A 8”
+ SMARTPHONE
PC
RECHARGEABLE
DEVICES
TABLET 10” TABLET UP TO 8”
+ SMARTPHONE
PC
RAEE - Informazione agli utilizzatori
Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile deve
essere raccolto separatamente dagli altri rifiuti. L’utente dovrà, pertanto, conferire l’apparecchiatura giunta a ne vita agli idonei centri comunali
di raccolta differenziata dei rifiuti elettrotecnici ed elettronici. In alter nativa alla gestione autonoma, è possibile consegnare gratuitamente
l’apparecchiatura che si desidera smaltire al distributore, al momento dell’acquisto di una nuova apparecchiatura di tipo equivalente. Presso
i distributori di prodotti elettronici con superficie di vendita di almeno 400 m
2 è inoltre possibile consegnare gratuitamente, senza obbligo di
acquisto, i prodotti elettronici da smaltire con dimensioni inferiori a 25 cm. Ladeguata raccolta differenziata per l’avvio successivo dell’ap-
parecchiatura dismessa al riciclaggio, al trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti
negativi sull’ambiente e sulla salute e favorisce il reimpiego e/o riciclo dei materiali di cui è composta l’apparecchiatura.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste
at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new
one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least
400 m2, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or
its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/
or recycling of the construction materials.


Produkt Specifikationer

Mærke: Vimar
Kategori: niet gecategoriseerd
Model: 19295.AC.B

Har du brug for hjælp?

Hvis du har brug for hjælp til Vimar 19295.AC.B stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd Vimar Manualer

Vimar

Vimar 14380 Manual

20 August 2024
Vimar

Vimar ELVOX 1264 Manual

19 August 2024
Vimar

Vimar 19346 Manual

18 August 2024
Vimar

Vimar ELVOX 122N Manual

17 August 2024
Vimar

Vimar ELVOX 5721/D Manual

17 August 2024
Vimar

Vimar ELVOX 40540 Manual

16 August 2024
Vimar

Vimar 16472 Manual

15 August 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer

IFM

IFM O6T207 Manual

16 September 2024
Güde

Güde LG 18-30 Manual

16 September 2024
Uniden

Uniden WPP 15W + D800 Manual

16 September 2024
JUNG

JUNG BTCCD508 Manual

16 September 2024
Samsung

Samsung AC036TN4PKC Manual

16 September 2024
Nedis

Nedis ACON2503AT Manual

16 September 2024
SVAN

SVAN SVTE050 Manual

16 September 2024
IFM

IFM EVC085 Manual

16 September 2024
IFM

IFM EVM042 Manual

16 September 2024
Denver

Denver VR-20 Manual

16 September 2024