Vivotek AW-GET-083A-120 Manual

Vivotek Ikke kategoriseret AW-GET-083A-120

Læs nedenfor 📖 manual på dansk for Vivotek AW-GET-083A-120 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
10/100/1000 RJ45
data ports
100/1000 SFP ports
DC input
LEDs
VAC 100~240 power input 10/100/1000 RJ45
PoE ports
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 150W.
IMPORTANT:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
* 1x T30 L-wrench, 4x wall anchors
PACKAGE CONTENTS
Power1 Green ON Power is on and normal.
Green Off The switch is not receiving power.
Power2 Green ON Power is on and normal.
Green Off The switch is not receiving power.
RJ45 ports
LED1
Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON Port is enabled and link established with a device at the10/100Mbps speed.
Amber Blinking Port is transmitting and receiving data at the 100Mbps speed.
Off No active network connection. The port may have been disabled through user interface.
RJ45 ports
LED2
Green ON The port is enabled and supplying power to connected device.
Amber ON An abnormal state, such as overload status has occurred.
Off T t t t k c ct , it is t c t a PoE PD vice. Ot se, t t e he por has no ac ive ne wor cable onne ed or no onnec ed de herwi he por may hav
been disabled through the switch user interface.
SFP ports Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Off No active network connection. The port may have been disabled through user interface.
AW-GET-083A-120
Quick Installation Guide
The AW-GET-083A-120 is a 4 port 10/100/1000BaseT PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with another 2x GbE Ethernet and 2x GbE SFP port. The switch is
capable of a total of 120 Watts PoE power budget.
Outdoor PoE Switch
Port LED1 Port LED2
RESET
Reset the switch Hold Reset Button 2 seconds All LEDs On/Off


Produkt Specifikationer

Mærke: Vivotek
Kategori: Ikke kategoriseret
Model: AW-GET-083A-120

Har du brug for hjælp?

Hvis du har brug for hjælp til Vivotek AW-GET-083A-120 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vivotek Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Wagner

Wagner 2K Smart Manual

4 November 2024
Moen

Moen EB500-E Manual

3 November 2024
Moen

Moen Aspen 5824CH Manual

3 November 2024
Luxman

Luxman MQ-88uSE Manual

3 November 2024
Luxman

Luxman CL-38uSE Manual

3 November 2024
Luxman

Luxman CL-1000 Manual

3 November 2024
Moen

Moen Aspen 5802CH Manual

3 November 2024
Luxman

Luxman SQ-38u Manual

3 November 2024
Moen

Moen Aspen 5818CH Manual

3 November 2024