Vivotek AW-IHT-0602 Manual


Læs nedenfor 📖 manual på dansk for Vivotek AW-IHT-0602 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
1. Install the switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. DC input (24V~56VDC). Follow the printed polarity for V+, V-, and Ground.
AW-IHT-0602 Industrial EN50155 M12 PoE Switch
Quick Installation Guide
The AW-IHT-0602 is a rugged M12 PoE switch designed for delivering a max. of 30 watts to powered devices. The uplink
port can be used to extend the connection to a remote site. With ruggedized and M12 connection design, it is t for IP
surveillance in transportation applications in critical environments. The machine features a total budget of 126 watts and
a wide range of operating temperatures ranging from -40°C to 75°C.
IMPORTANT:
INTRODUCTION
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
PACKAGE CONTENTS
WARNING - Always ground the power source to maintain a clean power input.
LAN/WAN
VDC 24~56
Alarm output
PW1 ON When V1+ and V1- are connected.
PW2 ON When V2+ and V2- are connected.
PW-FAIL
(Relay LED)
ON Either PW1 or PW2 is conncted.
OFF Both PW1 or PW2 are connected.
LAN
(Data LED)
ON Link port is detected.
OFF Link port is not detected.
Flashing Data is being transmitted or received.
PoE LED
- Green
ON PD is detected.
OFF PD is not detected.
Flashing Port is active, or current is over-loading.
LED DEFINITIONS


Produkt Specifikationer

Mærke: Vivotek
Kategori: Ikke kategoriseret
Model: AW-IHT-0602
Kode for international beskyttelse (IP): IP40
Bredde: 163 mm
Dybde: 100 mm
Højde: 56.2 mm
Vægt: 850 g
Produktfarve: Sort
Opbevaringstemperatur (T-T): -40 - 85 °C
Relativ luftfugtighed ved drift (H-H): 5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H): 5 - 95 %
Strømforbrug (typisk): 126 W
Driftstemperatur (T-T): -40 - 75 °C
Husmateriale: Metal
Certificering: CE, C-Tick, FCC, VCCI, LVD
Netværksstandarder: IEEE 802.3,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x
LED-indikatorer: LAN,PoE,Power
Kan monteres på væggen: Ja
DC indgangsspænding: 24 - 56 V
Strøm over Ethernet (PoE): Ja
Total Power over Ethernet (PoE): 120 W
Power over Ethernet (PoE) effekt pr. port: 30 W
Auto MDI/MDI-X: Ja
Kobber ethernet kabelteknologi: 10BASE-T,100BASE-TX
Basis omskiftning RJ-45 Ethernet porte, antal: 6
Basis omskiftning RJ-45 Ethernet porttype: Fast Ethernet (10/100)
Opbevar-og-frem: Ja
MAC adresselabel: 1000 entries
Switch kapacitet: 1.2 Gbit/sek.
Strømbeskyttelsesfunktioner: Over current,Short circuit
Bufferstørrelse: 128 KB
Power over Ethernet (PoE) porte, antal: 4
Understøttede kabeltyper: Cat3,Cat4,Cat5,Cat5e
Pakke videresendelsesrate (100 Mbps): 148000 pps
Pakke videresendelsesrate (10 Mbps): 14880 pps

Har du brug for hjælp?

Hvis du har brug for hjælp til Vivotek AW-IHT-0602 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vivotek Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024