Whirlpool ART 228/80 A+/SF Manual

Whirlpool Køleskab ART 228/80 A+/SF

Læs nedenfor 📖 manual på dansk for Whirlpool ART 228/80 A+/SF (10 sider) i kategorien Køleskab. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/10
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
CONTROL PANEL
1. 2.
1. On/stand-by
2. Refrigerator temperature - Fast cool
6TH SENSE FRESH CONTROL
The appliance is automatically able to quickly reach the optimal
internal preservation temperature. The function enables to control also
the humidity of the appliance. In order for it to function correctly, the
fan must also be turned on. It is possible to turn the function on/o
(see Fan description).
FAN*
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food and reduction of excess
humidity. The fan is switched on by default and can be activate/
deactivate manually. The fan operating mode is adjusted based on
product condition. You can turn the fan on/oby pressing the
and “On/Stand-by” buttons at the same time for 3 seconds. The
lit 6thSense FreshControl symbol indicates that the fan is on and
therefore the 6thSense FreshControl function is on. If the ambient
temperature exceeds 27°C, or if drops of water are present on the
glass shelves, it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows energy
consumption to be optimised.
Note: the fan restarts automatically after a power cut or after turning o
the appliance. Do not obstruct the air intake area with food items.
ANTIBACTERIAL FILTER*
Remove it from the box placed in the Fruit and vegetable drawer and
insert into the cover of fan. The replacement procedure is included in
the lter box.
ON/STAND-BY
Press the button for 3 seconds to turn the appliance o. In
Stand-by mode the light in the refrigerator compartment does not turn
on. Press the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
REFRIGERATOR COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature with the button.
There are ve possible controls.
From a less cold temperature (left)
to a colder temperature (right).
FAST COOL
Press the button for 3 seconds to quickly cool the
refrigerator compartment or 6 hours before putting large quantities of
food to be frozen in the freezing zone. When the function is turned on
the icon lights up.
The function automatically turns o after 30 hours, or manually by
pressing the button again for 3 seconds.
Note: avoid a direct contact between the fresh food and the food that is
already frozen To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
* Available only on certain models


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Køleskab
Model: ART 228/80 A+/SF

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool ART 228/80 A+/SF stil et spørgsmål nedenfor, og andre brugere vil svare dig




Køleskab Whirlpool Manualer

Køleskab Manualer

Nyeste Køleskab Manualer