Whirlpool WED8620HC Manual

Whirlpool Tørretumbler WED8620HC

Læs nedenfor 📖 manual på dansk for Whirlpool WED8620HC (2 sider) i kategorien Tørretumbler. Denne guide var nyttig for 46 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

OPERATING INSTRUCTIONS

WARNING: To reduce the risk of re, electric shock, or injury to persons,

read the IMPORTANT SAFETY INSTRUCTIONS, located in your

appliance’s Owner’s Manual, before operating this appliance.

Dryer Quick Start Guide

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in

death or fire.

Step 1. Clean Lint Screen

Step 2. Load Clothes

Step 3. Turn Power On

Step 4. Close Door; then Select Cycle

and Settings

Step 5. Press START/PAUSE

Online Ordering Information

For information on any of the following items, a full cycle guide, warranty, detailed

product dimensions, or for complete instructions for use and installation, please visit

https://www.whirlpool.com/owners, or in Canada https://www.whirlpool.ca/owners.

This may save you the cost of a service call.

Add Service Plan Parts Filters Accessories

However, if you need to contact us, use the information listed below for the appropriate region.

United States:

1–866–698–2538

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022–2692

Canada:

1–800–807–6777

Whirlpool Brand Home Appliances

Customer eXperience Centre

200–6750 Century Ave.

Mississauga, Ontario L5N 0B7

For detailed installation instruction and maintenance information, winter storage, and

transportation tips, please see the Owner’s Manual included with your machine.

Button Descriptions

1. POWER/CANCEL

Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any

time.

2. WHAT TO WASH/HOW TO WASH

Once a “What to Dry” is selected, the dryer automatically selects

the recommended or last-used “How to Dry” option, as well as

the recommended/last-used modiers. Both the “How to Dry” and

modiers can be changed if desired. See the Online “Cycle Guide” for

details.

3. START/PAUSE

Touch and hold until LED counts down “3-2-1” and the dryer starts;

then let go to start a cycle, or touch once while a cycle is in process

to pause it.

4. MODIFIERS

Use to select available modiers for your dryer. Not all cycles and

options are available on all models. See the Online “Cycle Guide” for

details.

Temp

When using Timed Dry/Quick Cycle, you may select a dry temperature

based on the type of load you are drying. Use the warmest setting

that is acceptable for the garments in the load. Follow garment label

instructions.

NOTE: Automatic Cycles will give you up to 4 temperatures to adjust,

depending on the “What to Dry” or “How to Dry” selections that have

been made.

Dryness

You may adjust the Dryness on Automatic Cycles (except for the

Sanitize cycle), if desired.

NOTE: Dryness is for use with Automatic Cycles only.

More Time/Less Time

Touch More Time or Less Time with Timed Dry/Quick Dry Cycles to

increase or decrease the length of the cycle.

5. OPTIONS

Use to select available options for your dryer. Not all cycles and

options are available on all models.

Wrinkle Shield™ Option

If you will be unable to remove a load immediately, touch Wrinkle

Shield™ to add up to 150 minutes of periodic tumbling to help reduce

wrinkling. You may select the “+ Steam” setting (on some models

only) to add a short steam cycle after 60 minutes to help smooth out

wrinkles.

NOTE: If you open the dryer door prior to the end of the Wrinkle

Shield™ option, the dryer will pause.

Steam Refresh (steam models only)

This cycle is best for reducing wrinkles and odors from dry items.

Cycle time will increase, depending on number of items. This is an

independent cycle that cannot be combined with any other cycle.

Cycle Signal

Use this to turn the signal indicating the end of a drying cycle to low,

medium, high, or off. The volume you select here will also be applied

to the Damp Dry Signal.

NOTE: You may also turn off the tones that sound when a feature,

setting, or option is touched. Touch and hold Cycle Signal for about

3 seconds to turn sounds to low, medium, high, or off.

Damp Dry Signal

Touch to select the Damp Dry Signal on or off. When selected, a

series of beeps will sound when the load is damp, but not completely

dry. This will allow you to take clothes out of the load that do not need

to dry completely. The Damp Dry Signal is selected as a default for the

Bulky Items cycles, as a reminder to manually reposition bulky loads

midway through the cycle. This option is not available for all cycles.

See the online “Cycle Guide” for details.

Reduce Static (on some models)

Touch to add this option to selected

Automatic Cycles. The dryer will automatically

tumble, pause, and introduce a small amount

of moisture into the load to help reduce static.

This option adds approximately 3 minutes to

the total cycle time

Control Lock

Use this option to lock the controls of the

dryer and avoid an unintended change in cycle options or preferences

during a drying cycle. Touch and hold Control Lock or Damp Dry

Signal (depending on the model) for 3 seconds to lock or unlock the

controls of the dryer. During this time, the LED Display will count down

“3-2-1.” Once the controls are locked, the LED Display will display

“Loc.”

NOTE: The Control Lock function may be enabled when recovering

from a power failure. To unlock the control, touch and hold Control

Lock or Damp Dry Signal (depending on the model) for at least 3

seconds.

EcoBoost™ Option

The EcoBoost™ option will default on only for the Regular/Normal

cycle and is only available on that cycle. This option allows you to

increase your energy savings by using a slightly lower heat level. The

EcoBoost™ option will increase drying times by approximately 40

minutes, which will be reected on the LED display. If optimal time is

desired, touch ECOBOOST to turn off this option.

6. LED DISPLAY

When you select a cycle, its default settings will light up and the

estimated time remaining (for Automatic Cycles) will vary depending

on “What to Dry” and “How to Dry” selections or actual time

remaining for Timed Dry cycles (for Manual Cycles) will be displayed.

CYCLE STATUS

The Cycle Status indicators show the progress of a cycle. Not all

indicators are available on all models.

Sensing

The Sensing indicator will light periodically during Sensor Cycles

to indicate that the moisture sensor on the dryer is operating. This

indicator will not light during Timed Cycles or options such as Wrinkle

Shield™ Option.

Wet

The load is still wet and/or the cycle just started.

Damp

This indicator shows that the load is partially dried and items that you

may wish to hang up or iron while still damp may be removed.

Cool Down

The dryer has nished drying with heat and is now tumbling the load

without heat to cool it down and reduce wrinkling.

Check Vent

The Check Vent indicator is a feature available for Automatic Cycles

only. This indicator will show the status of airow through the dryer

and the dryer

vent system for the dryer’s life. During the sensing phase at the

beginning of the cycle, the Check Vent light will come on if a blocked

vent or low airow issue is detected. This light will stay on for the

entire cycle. Should the Check Vent light illuminate, refer to the Online

“Troubleshooting” section for potential solutions to the issue. The

light will be cleared upon completion of the cycle, touching Power,

or opening the door. The Check Vent light will continue to illuminate

during the cycle unless the root cause is resolved.

NOTE: The dryer will continue to operate even while the indicator is

lit, but poor airow can impact dry times and overall performance. See

“Check Your Vent System for Good Airow” in the Owner’s Manual.

NOTE: If there are other error issues during a cycle, the Check Vent

indicator will not light up. See the Online “Troubleshooting” section.

End

This will indicate that the selected cycle has ended and the load

may be removed from the dryer. If Wrinkle Shield™ Option has been

selected, the dryer may continue to tumble the load, even if “End” is

displayed.

Control Lock

This will illuminate once the controls are locked.

W11550663A

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in

death, explosion, or fire.

Cycle Guide - Normal Cycle

This dryer has a unique user interface to help you select the best cycle you need for your load.

The “What to Dry” “How to Dry” layout guides you to the optimal cycle in two easy steps: First

determine what items are in the load that you are trying to dry. Use that to guide your “What to

Dry” selection. Then determine how you want the dryer to dry them and select the appropriate

“How to Dry” selection. Modiers are preset for the items being dried, but can be changed if

desired. To get the most energy savings and enhanced fabric care from your dryer, use the Auto-

matic cycles.

These cycles measure the drying air temperature and moisture levels to turn the dryer off once

the load reaches the selected dryness level. Dryer performance and results may vary with service

voltage less than 240 V.

Items to Dry: “What to Dry”: “How to Dry”: Description:

Baby clothes,

Blankets, Cotton

undergarments,

Colored napkins

Regular

Bulky Items

Whites

Sheets

Colors

Normal Automatic Sensor cycle stops

when dryness level is reached.

See Online “Cycle Guide” for

details.

NOTE: Government energy certications for this model were based on the Regular + Normal Cy-

cle, Highest temperature setting, Normal Dryness Level, EcoBoost™ On. The as-shipped defaults

were the same as the Government Energy Certication Settings except the default Temperature

Setting of Medium was adjusted to the Highest temperature setting. Cycles that are available

for post-sale download may use more energy than the Normal cycle, upon which the energy use

rating of this dryer is based upon.

Not all features, cycles, and options are available on all models. Appearance may vary.

NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are

registered, touch the control panel with your nger tip, not your ngernail. When selecting a setting or option, simply touch its

name.

Produkt Specifikationer

Mærke:	Whirlpool
Kategori:	Tørretumbler
Model:	WED8620HC

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WED8620HC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tørretumbler Whirlpool Manualer

Whirlpool FT M22 8X3B EU Manual

3 November 2024

Whirlpool FFT M11 8X2BS BE R Manual

3 November 2024

Whirlpool FFT M11 9X2BS BE R Manual

3 November 2024

Whirlpool 3RAWZ481E Manual

14 Oktober 2024

Whirlpool WGD5720RW Manual

1 Oktober 2024

Whirlpool WGD5720RR Manual

1 Oktober 2024

Whirlpool AWZ 568/3 Manual

29 September 2024

Whirlpool AWZ 133/3 Manual

20 September 2024

Whirlpool WGD9620HC Manual

18 September 2024

Whirlpool AWZ 3667 Manual

17 September 2024

Tørretumbler Manualer

Nyeste Tørretumbler Manualer

BEKO BM3T39232CW Manual

21 November 2024

Faure FDH7334PZ Manual

21 November 2024

Faure FDP7206PZ Manual

21 November 2024

Nabo TK 7001 Manual

21 November 2024

Smeg SACD7 Manual

20 November 2024

SanGiorgio SDR9P Manual

20 November 2024

SanGiorgio SDR8P Manual

20 November 2024

Miele TDD 130 WP Manual

16 November 2024

AEG TR8G82OW Manual

16 November 2024

Electrolux EDI621B85B Manual

15 November 2024