Whirlpool WGD5720RR Manual

Whirlpool Wasdroger WGD5720RR

Læs nedenfor 📖 manual på dansk for Whirlpool WGD5720RR (2 sider) i kategorien Wasdroger. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
W11708006B
DRYER QUICK START GUIDE
OPERATING INSTRUCTIONS
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil
on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located
in your appliance s Owner s Manual, before operating this appliance.
Button Descriptions
1. POWER/CANCEL
Touch to turn the dryer on and off. Touch to stop/cancel a cycle at
any time.
2. START/PAUSE
Touch and hold until LED counts down “3-2-1” and the dryer starts;
then let go to start a cycle, or touch once while a cycle is in process
to pause it.
3. MODIFIERS
Use to select available modifiers for your dryer. Not all cycles and
options are available on all models. See the online “Cycle Guide” for
details.
Step 1. Clean Lint Screen
Step 2. Load Clothes; then
Close Door
Step 3. Power On/Cancel
Step 4. Select Cycle and
Settings
Step 5. Press Start/Pause
Cycle Guide
This dryer has a unique user interface to help you select the best cycle you need for your load. The
controls layout guides you to the optimal cycle in two easy steps: First determine what items are in the
load that you are trying to dry. Use that to guide your selection. Then determine how you want the
dryer to dry them and select the appropriate selection. Modifiers are preset for the items being dried,
but can be changed if desired.
To get the most energy savings and enhanced fabric care from your dryer, use the Automatic cycles.
These cycles measure the drying air temperature and moisture levels to turn the dryer off once the
load reaches the selected dryness level. Dryer performance and results may vary with service voltage
less than 240.
Items to Dry: Cycle: Dryness
Level:
Description:
Baby clothes,
Blankets, Cotton
undergarments,
Colored napkins
Regular
Bulky Items
Whites
Sheets
Colors
Normal Automatic Sensor cycle stops when
dryness level is reached.
See online “Cycle Guide” for details.
NOTE: These clothes dryer’s Government energy certifications were based on the Low Heat Normal
Cycle, EcoBoost Defaulted ON, Highest Temperature and Normal Dryness Level. The as-shipped
defaults of Low Heat Normal, EcoBoost ON, Medium Temperature and Wrinkle Shield Off were used.
Cycles that are available for post-sale download may use more energy than the Low Heat Normal
cycle, upon which the energy use rating of this dryer is based upon.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation
tips, please see the Owner’s Manual included with your machine.
For information on any of the following items, a full cycle guide, warranty, detailed product dimensions,
or for complete instructions for use and installation, please visit www.whirlpool.com/owners, or in
Canada . This may save you the cost of a service call.www.whirlpool.ca/owners
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–866–698–2538
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Canada:
1–800–807–6777
Whirlpool Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
IMPORTANT: Retain this guide for future use.
3
4
2
1
4 3
5 6
Not all features, cycles, and options are available on all models. Appearance may vary.
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name.
Control Lock
Use lock this option to the controls of dryer the and avoid an
accidental unintended change in cycle options or preferences
during a drying cycle. Touch and hold Control Lock or Damp Dry
Signal (depending on the model) for 3 seconds to lock or unlock the
controls of the dryer. During this time, the LED Display will count
down “3-2-1.” Once the the controls are locked, LED Display will
display Loc.”
NOTE: The Control Lock function may be enabled when recovering
from o a power failure. T unlock the control, touch and hold Control
Lock or Damp Dry Signal (depending on the model) for at least 3
seconds.
EcoBoost Option
The EcoBoost option will default on only for the Regular/Normal
cycle and that is only available on cycle. This option allows you to
increase your energy savings heat by using a slightly lower level.
The EcoBoost option will increase drying times by approximately
40 which be on minutes, will reflected the LED display. If optimal
time is desired, touch ECOBOOST to turn off this option.
5. Remote Start 3 sec for WI-FI
You can control this smart dryer remotely to manage laundry day
from your smartphone. Access Favorite Cycles from the Whirlpool
®
app to send laundry cycles to dryer your and start the load remotely.
6. LED DISPLAY
When select you a cycle, its default settings will light up and the
estimated time Cycles) remaining (for Automatic will vary
depending on selections or actual time remaining for Timed Dry
cycles (for Manual Cycles) will be displayed.
CYCLE STATUS
The Cycle Status indicators show the progress of a cycle. Not all
indicators are available on all models.
Wet
The load is still wet and/or the cycle just started.
Cool Down
The dryer has finished drying with heat and is now tumbling the
load without heat to cool it down and reduce wrinkling.
Check Vent
The Check Vent indicator is a feature available for Automatic
Cycles only. This indicator will show the status of airflow through
the dryer and the dryer vent system for the dryers life. During the
sensing phase at the beginning of the cycle, the Check Vent light
will come on if a blocked vent or low airflow issue is detected. This
light will stay on for the entire cycle. Should the Check Vent light
illuminate, refer to the online “Troubleshooting” section for potential
solutions to the issue.
The light will be cleared upon completion of the cycle, touching
Power, or opening the door. The Check Vent light will continue to
illuminate during the cycle unless the root cause is resolved.
NOTE: The dryer will continue to operate even while the indicator is
lit, but poor airflow can impact dry times and overall performance.
See “Check Your Vent System for Good Airflow” in the Owner’s
Manual.
NOTE: If there are other error issues during a cycle, the Check Vent
indicator will not light up. See the online “Troubleshooting” section.
End
This will indicate that the selected cycle has ended and the load
may be removed from the dryer. If Wrinkle Shield Option has
been selected, the dryer may continue to tumble the load, even if
“End” is displayed.
Control
Lock
This will illuminate once the controls are locked.
Temp
When using Timed Dry/Quick Cycle, you may select a dry
temperature based on the type of load you are drying. Use the
warmest setting that is acceptable for the garments in the load.
Follow garment label instructions.
NOTE: Automatic Cycles will give you up to 4 temperatures to adjust,
depending on the selections that have been made.
Drying Levels
You may adjust the Dryness on Automatic Cycles (except for the
Sanitize cycle), if desired.
NOTE: Dryness is for use with Automatic Cycles only.
More Time/Less Time
Touch More Time or Less Time with Timed Dry/Quick Dry Cycles to
increase or decrease the length of the cycle.
4. OPTIONS
Use to select available options for your dryer. Not all cycles and
options are available on all models.
Wrinkle Shield™ Option
If you will be unable to remove a load immediately, touch
Wrinkle Shield™ to add up to 150 minutes of periodic tumbling to
help reduce wrinkling.
NOTE: If you open the dryer door prior to the end of the
Wrinkle Shield option, the dryer will pause.
Cycle Signal
Use this to turn the signal indicating the end of a drying cycle to low,
medium, high, or off. The volume you select here will also be applied
to the Damp Dry Signal.
NOTE: You may also turn off the tones that sound when a feature,
setting, or option is touched. Touch and hold Cycle Signal for about 3
seconds to turn sounds to low, medium, high, or off.
Damp Dry Signal
Touch to select the Damp Dry Signal on or off. When selected, a
series of beeps will sound when the load is damp, but not completely
dry. This will allow you to take clothes out of the load that do not need
to dry completely. The Damp Dry Signal is selected as a default for
the Bulky Items cycles, as a reminder to manually reposition bulky
loads midway through the cycle. This option is not available for all
cycles. See the online “Cycle Guide” for details.


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Wasdroger
Model: WGD5720RR

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WGD5720RR stil et spørgsmål nedenfor, og andre brugere vil svare dig




Wasdroger Whirlpool Manualer

Whirlpool

Whirlpool AWZ 568/3 Manual

29 September 2024
Whirlpool

Whirlpool AWZ 133/3 Manual

20 September 2024
Whirlpool

Whirlpool WGD9620HC Manual

18 September 2024
Whirlpool

Whirlpool AWZ 3667 Manual

17 September 2024
Whirlpool

Whirlpool FTNL M11 Manual

13 September 2024
Whirlpool

Whirlpool WGD4815EW Manual

13 September 2024
Whirlpool

Whirlpool HDLX 70412 Manual

12 September 2024

Wasdroger Manualer

Nyeste Wasdroger Manualer