Wyse - Dell P20 Dual Manual

Wyse - Dell Diverse - Andet P20 Dual

Læs gratis den danske manual til Wyse - Dell P20 Dual (4 sider) i kategorien Diverse - Andet. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Wyse - Dell P20 Dual, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Wyse P20 Dual VESA Mount

Installation Instructions

The bracket enables a Wyse P20 zero client to be mounted to a wall or on most VESA

compliant mounting surfaces and monitors. Both VESA 75 mm and 100 mm mounting

patterns are supported. The mounting bracket consists of two (2) pieces. The largest

bracket piece attaches to the mounting surface using the VESA mounting patterns.

User-provided hardware must be used that can withstand a force of 25 pounds (11.35

kilograms). The zero client is inserted in a vertical position and cables are attached. The

smaller bracket piece attaches to the VESA compliant mounting monitor. The monitor

bracket and mounted wall bracket pieces are then joined with the provided four (4) thumb

screws.

Notes

When determining location, take into account the cable lengths of the

monitor, keyboard, mouse, power supply, and peripherals.

Mount the zero client only as indicated; improper orientation (where the back

panel or front panel is facing down) could inhibit the dissipation of heat from

the device and damage it.

Do not enclosed the zero client in a confined environment without proper

ventilation. If you have questions, contact the Wyse Sustaining Engineering

Group.

Use the following instructions to mount the zero client:

1. Attach the largest bracket to the mounting surface (a swing arm mount is shown). The

mounting surface can have either the VESA 75 mm or 100 mm mounting pattern. The

bracket should be placed upright as shown. Secure the bracket with proper

user-provided hardware that can withstand a force of 25 pounds (11.35 kilograms).

Note

If installing on a hollow wall, any standard anchoring method may be used,

such as screws, butterfly anchors, or expansion bolts.

2. Slide the zero client into the mounted bracket as shown using the pre-assembled guide

rails until it clicks into place. The power button must be positioned as shown.

Produkt Specifikationer

Mærke:	Wyse - Dell
Kategori:	Diverse - Andet
Model:	P20 Dual

Har du brug for hjælp?

Hvis du har brug for hjælp til Wyse - Dell P20 Dual stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Diverse - Andet Wyse - Dell Manualer

Wyse - Dell P20 Dual Manual

25 August 2024

Diverse - Andet Manualer

Nyeste Diverse - Andet Manualer

Roland BC TC-SC Manual

2 April 2025

ZyXEL XS1920-12 Manual

27 Marts 2025

Eminent EM7100 Manual

14 Januar 2025

Eminent EM3971 Manual

14 Januar 2025

Alesis Q49 Manual

5 Oktober 2024

NewStar FPMA-DTB200 Manual

25 September 2024

Sitecom LN-403 IP camera Manual

22 September 2024

NewStar FPMA-D935D4 Manual

18 September 2024

NewStar FPMA-LIFT100 Manual

17 September 2024

TrekStor DataStation picco SSD 3.0 Manual

16 September 2024