Yamaha DTX720K Manual

Yamaha Musikinstrument DTX720K

Læs nedenfor 📖 manual på dansk for Yamaha DTX720K (2 sider) i kategorien Musikinstrument. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

This manual describes the standard assembly procedure for the DTX582K/DTX720K electronic drum kits. It covers assembly and wiring of the kit as shown below.

When you have completed all of the steps described, you will be ready to turn on the drum trigger module and start playing.

Illustrations show the DTX502 drum trigger module.

ELECTRONIC DRUM KIT

DTX582K/DTX720K Assembly Manual

This manual describes the process of assembling a drum-pad set and drum trigger module to an already assembled RS502

Electronic Drum Rack. Before starting the steps below, therefore, be sure to assemble your RS502 as described in the Owner’s

Manual that came with it.

IMPORTANT

Before starting assembly, lay a drum mat (sold separately) on the floor. Alternatively, you can

place cardboard from the drum kit packaging or the like on the floor to prevent it from being

scratched. This is particularly important when using the HS650A Hi-hat Stand and KP100

Kick Pad.

NOTE

If using double foot pedals and want to position them relatively far apart from one another,

please setup as shown below.

NOTICE

Example of standard assembly

Cymbal pad

Tom pad

Tom pads

Kick pad

Snare pad

Hi-hat stand

DTX502/DTX700

Drum trigger module

Real Hi-hat Pad

Electronic drum rack

Cymbal pad

The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. As a means of indicating the severity and immediacy

of any risk of injury or property damage resulting from incorrect operation, these precautions are classified as either WARNING or CAUTION. The instructions disp these precautions layed together with

are extremely important in terms of ensuring safety, and therefore, they should be fully observed.

* After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference.

* Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads and rack.

NOTICE: Usage Precautions

• When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition,

avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid

these precautions can lead to cable breakage and disconnection.

• Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this pre-

caution can result in malfunction.

• Avoid using or storing the electronic drum kit in very hot locations (i.e., in direct sunlight, in close proximity to

a heater, or in a closed vehicle) or in highly humid locations (i.e., in a bathroom or outdoors in wet weather).

Failure to observe this precaution can lead to warping, discoloration, malfunction, or breakdown.

• Avoid cleaning the electronic drum kit with organic solvents, paint thinner, or alcohol as these substances

can cause warping and discoloration. Instead, we recommend you remove dust using a soft dry cloth or

wipe clean using a moist, tightly-wrung cloth. If the electronic drum kit is very dirty, first wipe the dirt away

using a cloth moistened with a neutral detergent solution and tightly wrung. Following this, wipe away the

detergent solution using a cloth soaked in water and tightly wrung.

Safety Precautions Please read carefully before proceeding.

Failure to observe the precautions described below can result in se-

rious injury or even death.

• Young children using this electronic drum kit should be supervised by a guardian to eliminate any

possibility of injury.

• Holders for cymbal and tom pads have sharp tips. In order to avoid injury, therefore, you should

take special care whenever handling these components.

• The anti-slip stoppers on kick pads and foot pedals have sharp tips. In order to avoid injury, there-

fore, you should take special care whenever handling these components.

• Be sure to securely tighten nuts and other fasteners when setting up this electronic drum kit. In

addition, be sure to proceed slowly when loosening nuts. If this precaution is not observed, pads

may fall off or the rack may collapse or fall over, possibly causing injury.

• Do not setup this electronic drum kit on a slope, on an unstable platform, or on any other unsafe

surface. If this precaution is not observed, it may topple over or fall, possibly causing injury.

• Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If

someone were to trip on a cable, the kit could topple over and cause injury.

• Under no circumstances should this electronic drum kit be disassembled or customized. Failure to

observe this precaution can result in injury or malfunction.

• Do not sit or stand on the rack. Doing so could cause it to fall over or break, possibly causing injury.

WARNING

Failure to observe the precautions described below can result in in-

jury and/or property damage.

• Mind your fingers when adjusting clamps. They can easily be crushed if care is not taken during

this operation.

• Be careful with the tips of supports, arms, screws, and the like. Fingers can easily be injured by

sharp tips if these components are not handled carefully.

• Do not place hands or feet under a kick pad or foot pedal. Doing so could result in injury.

• Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could cause clamps to

break and the drums to fall off, which in turn could lead to injury.

CAUTION

Manual Development Department

Published 12/2015 POAP*.*-**A0

Printed in Vietnam

ZU86750

Open the boxes to reveal their contents.

After opening up the packages containing your electronic drum kit, please verify that all of the following components are present.

Assemble the RS502 Electronic Drum Rack.

For instructions on how to assemble the RS502 Electronic Drum Rack, refer to the Owner’s Manual that came with it.

Assemble the pads and the drum trigger module to the electronic drum rack.

Components of DTX582K/DTX720K

XP80 Snare Pad

(x1)

PCY135 Cymbal

Pad (x2)

RHH135 Real

Hi-Hat Pad (x1)

Stand base for

RHH135 (x1)

RS502 Electronic Drum Rack (x1)

RS502 Owner’s Manual (x1)

HS650A Hi-hat

Stand (x1)

KP100 Kick Pad (x1)

Nine-channel snake cable (x1)

Stopper for

PCY135 (x2)

Cable band

(x6)

Cable band for

RHH135 (x1)

Felt pad for

PCY135 (x2)

DTX582K/DTX720K Assembly Manual (this booklet; x1)

PCY100/135/155 Owner’s Manual (x1)

RHH135 Owner’s Manual (x1)

XP70/80 Owner’s Manual (x1)

KP100 Owner’s Manual (x1)

DTX502/DTX700 Drum Trigger

Module (x1)

Power adaptor (x1)

* May not be included depending on

your particular area. Please check

with your Yamaha dealer.

DTX502/DTX700 Owner’s Manual

(x1)

Module holder (x1)

Module holder screw

(x2 for DTX502 / p1-x4 for DTX700)

 XP70 Tom Pad (x3) Clamp bolt

(for XP70 or XP80; x4)

Hi-hat clutch for

RHH135 (x1)

Tuning key (x1)

* The illustration shows the

DTX502 module holder.

Snare pad

1. Attach a clamp bolt to the snare pad and provisionally tighten

(by five or six turns).

2. Push the snare pad onto the rack’s snare holder. Ensure that

the rod section is fully inserted into the snare pad’s mounting

hole, and then tighten the clamp bolt to secure the pad in

place.

3. Loosen bolts A to D as shown below to adjust the height and

angle of the snare pad. When correctly positioned, be sure to

securely retighten the bolts before proceeding to the next

step.

Tom pads

1. As with the snare pad, attach a clamp bolt to each of the three

tom pads and provisionally tighten (by five or six turns).

2. Push each of the tom pads onto one of the rack’s tom holders.

Each time, ensure that the tom holder’s rod is fully inserted

into the tom pad’s mounting hole, and then tighten the bolt to

secure the pad in place.

3. Loosen bolts A to C as shown below to adjust the height and

angle of each tom pad. When correctly positioned, be sure to

securely retighten the bolts before proceeding to the next

step.

XP80 Snare Pad

Tom pads

XP70

Clamp bolt (tighten in the

direction of the arrow)

Snare pad (rear side)

Insert

Snare pad

Rod sectionSnare holder

Clamp bolt

Bolt A

Bolt C

Bolt D

Bolt B

Tom pad: XP70

Insert

Clamp bolt

Tom holder

Rod section

Bolt C

Bolt B

Bolt A

Assembling the snare and tom pads

* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time

without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

Continued on other side