Yamaha LFF225 Manual


Læs nedenfor 📖 manual på dansk for Yamaha LFF225 (112 sider) i kategorien Påhængsmotor. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/112
Read this manual carefully before operating this
outboard motor.
OWNER’S MANUAL
F225
LF225
F250
LF250
F300
LF300
F250D1
FL250D1
F300B1
FL300B1
LIT-18626-09-96
6CE-28199-34-E0
9
General information
EMU25171
Identification numbers record
EMU25184
Outboard motor serial number
The outboard motor serial number is
stamped on the label attached to the port
side of the clamp bracket.
Record your outboard motor serial number in
the spaces provided to assist you in ordering
spare parts from your Yamaha dealer or for
reference in case your outboard motor is sto-
len.
EMU34943
Digital electronic control serial
number
The digital electronic control serial number is
stamped on the label attached to the digital
electronic control box.
Record your digital electronic control serial
number in the spaces provided to assist you
in newly connecting the digital electronic
control to the outboard motor.
TIP:
Consult your Yamaha dealer if you have any
questions concerning the digital electronic
control serial number.
1. Outboard motor serial number location
1
ZMU07134
1. Digital electronic control serial number loca-
tion
ZMU05885
1
ZMU05887
1
Specifications and requirements
16
Tightening torque:
Spark plug:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Propeller nut:
54 Nm (5.51 kgf-m, 39.8 ft-lb)
Engine oil drain bolt:
27 Nm (2.75 kgf-m, 19.9 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
EMU33554
Installation requirements
EMU40480
Boat horsepower rating
WARNING
EWM01560
Overpowering a boat can cause severe
instability.
Before mounting the outboard motor, check
that the horsepower of the outboard motor
does not exceed the maximum horsepower
rating on the capacity plate of the boat. If the
boat does not have a capacity plate, consult
the boat manufacturer.
EMU40490
Mounting outboard motor
WARNING
EWM02500
Improper mounting of the outboard mo-
tor could result in hazardous condi-
tions such as poor handling, loss of
control, or fire hazards.
Because the outboard motor is very
heavy, special equipment and training
is required to mount it safely.
Your dealer or other person experienced in
proper rigging should mount the outboard
motor using correct equipment and complete
rigging instructions. For further information,
see page 50.
EMU34952
Digital electronic control
requirements
The digital electronic control be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.
WARNING
EWM01580
If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.
If the engine ever starts in gear, the
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.
This digital electronic control unit is only
available for the outboard motor which you
have purchased.
Prior to use of the digital electronic control
unit, set it in order to operate your outboard
motor only. Otherwise, it will not be possible
to operate the outboard motor.
Perform setting of the outboard motor and
the digital electronic control unit in the follow-
ing cases.
If a used outboard motor is installed
If the digital electronic control unit is re-
placed
If the ECM (Electronic control module) of
the used outboard motor is replaced
If the ECM (Electronic control module) of
the digital electronic control unit is re-
placed
Consult your Yamaha dealer for setting.


Produkt Specifikationer

Mærke: Yamaha
Kategori: Påhængsmotor
Model: LFF225

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha LFF225 stil et spørgsmål nedenfor, og andre brugere vil svare dig