Zebra MC930B-GSEAG4RW Manual

Zebra Stregkodelæser MC930B-GSEAG4RW

Læs nedenfor 📖 manual på dansk for Zebra MC930B-GSEAG4RW (2 sider) i kategorien Stregkodelæser. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Zebra reserves the right to make changes to any product to improve reliability,

function, or design. Zebra does not assume any product liability arising out of, or

in connection with, the application or use of any product, circuit, or application

described herein. No license is granted, either expressly or by implication,

estoppel, or otherwise under any patent right or patent, covering or relating to any

combination, system, apparatus, machine, material, method, or process in which

Zebra products might be used. An implied license exists only for equipment,

circuits, and subsystems contained in Zebra products.

MC93XX

Regulatory Guide

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA

www.zebra.com

MN-003409-02 Rev. A 7/2019Printed in China

Get Info

Additional Information

For information on using the MC9300, refer to the MC93XX User Guide available at:

www.zebra.com/MC93-info.

Regulatory Information

This device is approved under Zebra Technologies Corporation.

This guide applies to the following Model Numbers: MC930B, MC930P.

All Zebra devices are designed to be compliant with the rules and regulations in

locations they are sold and will be labeled as required.

Local language translations are available at the following website: www.zebra.com/

support.

Any changes or modifications to approved by Zebra, Zebra equipment, not expressly

could void the user’s authority to operate the equipment.

Declared maximum operating temperature: 50°C.

Bluetooth® Wireless Technology

This is an approved Bluetooth® product. For more information or to view the End

Product Listing, please visit www.bluetooth.org/tpg/listings.cfm.

Wireless Device Country Approvals

Regulatory markings subject to certification are applied to the device signifying the

radio(s) is/are approved for use in the following countries and continents: United

States, Canada, Japan, China, South Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC) for details of other country

markings. This is available at: www.zebra.com/doc.

Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland,

and the United Kingdom.

CAUTION: Operation of the device without regulatory approval is illegal.

Country Roaming

This device incorporates the International Roaming feature (IEEE802.11d), which will

ensure the product operates on the correct channels for the particular country of use.

Ad-Hoc Operation (2.4 GHz Band)

Ad-Hoc operation is limited to Channels 1-11 (2,412-2,462 MHz).

Wi-Fi Direct

Operation is limited to the foll ed in the country of owing channels/bands as support

use:

• Channels 1 - 11 (2,412 - 2,462 MHz)

• Channels 36 - 48 (5,150 - 5,250 MHz)

• Channels 149 - 165 (5,745 - 5,825 MHz)

Frequency of Operation – FCC and IC

5 GHz Only

Industry Canada Statement

CAUTION: The device for the band 5,150 - 5,250 MHz is only for indoor usage to reduce

potential for harmful interference to co-Channel mobile satellite systems. High power radars

are allocated as primary users (meaning they have priority) of 5,250 - 5,350 MHz and 5,650

- 5,850 MHz and these radars could cause interference and/or damage to LE-LAN devices.

AVERTISSEMENT: Le dispositive fonctionnant dans la bande 5,150 - 5,250 MHz est réservé

uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage

préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs

de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la

priorité) pour les bands 5,250 - 5,350 MHz et 5,650 - 5,850 MHz et que ces radars pourraient

causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

2.4 GHz Only

The available channels for 802.11 operation in Canada and the US are Channels 1 to

11. The range of channels is limited by firmware.

Health and Safety Recommendations

Technology Research.

Ergonomic Recommendations

CAUTION: In order to avoid or minimize the potential risk of ergonomic injury follow the

recommendations below. Consult with your local Health & Safety Manager to ensure that you

are adhering to your company's safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Vehicle Installation

RF signals may affect improper lded electronic ly installed or inadequately shie

systems in motor vehicles (including safety systems). Check with the manufacturer or

its representative regarding your vehicle. You should also consult the manufacturer

about any equipment that has been added to your vehicle.

An air bag inflates with great force. DO NOT place objects, including either installed or

portable wireless equipment, in the area over the air bag or in the air bag deployment

area. If in-vehicle wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

Position the device within easy reach. Be able to access the device without removing

your eyes from the road.

NOTE: Connection to an alert device that will cause a vehicle horn to sound or

lights to flash on receipt of a call on public roads is not permitted.

IMPORTANT: Before installing or using, check state and local laws regarding

windshield mounting and use of equipment.

For Safe Installation

• Do not put your phone in a location that obstructs the drivers vision or interferes

with the operation of the Vehicle.

• Do not cover an airbag.

Safety on the Road

Do not take notes or use the device while driving. Jotting down a “to do” list or flipping

through your address book takes attention away from your primary responsibility,

driving safely.

When driving a car, driving is your first responsibility - Give full attention to driving.

Check the laws and regulations on the use of wireless devices in the areas where you

drive. Always obey them.

When using a wireless device behind the wheel of a car, practice good common

sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial.

If available, these features help you to place your call without taking your attention

off the road.

2. When available, use a hands free device.

3. Let the person you are speaking with know you are driving; if necessary, suspend

the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice,

and even heavy traffic can be hazardous.

4. Dial sensibly and assess the traffic; if possible, place calls when you are not

moving or before pulling into traffic. Try to plan calls when your car will be

stationary. If you need to make a call while moving, dial only a few numbers,

check the road and your mirrors, then continue.

5. Do not engage in stressful or emotional conversations that may be distracting.

Make people you are talking with aware you are driving and suspend

conversations that have the pot from the road.ential to divert your attention

6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in

the US, and 1-1-2 in Europe) or other local emergency number in the case of fire,

traffic accident or medical emergencies. Remember, it is a free call on your

wireless phone! The call can be made regardless of any security codes and

depending on a network, with or without a SIM card inserted.

7. Use your wireless phone to help others in emergencies. If you see an auto

accident, crime in progress or other serious emergency where lives are in danger,

call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local

emergency number, as you would want others to do for you.

8. Call roadside assistance or a special non-emergency wireless assistance number

when necessary. If you see a broken ous hazard, a -down vehicle posing no seri

broken traffic signal, a minor traffic accident where no one appears injured, or a

vehicle you know to be stolen, c r special non-all roadside assistance or othe

emergency wireless number.

“The wireless industry reminds you to use your device / phone safely when driving”.

Warnings for Use of Wireless Devices

CAUTION: Please observe all warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres – Vehicles Use

You are reminded of the need to observe restrictions on the use of radio devices in

fuel depots, chemical plants etc. and areas where the air contains chemicals or

particles (such as grain, dust, or metal powders) and any other area where you would

normally be advised to turn off your vehicle engine.

Safety in Aircraft

Switch off your wireless device whenever you are instructed to do so by airport or

airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline staff

as to its use in flight.

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical

equipment.

Wireless devices should be switched off wherever you are requested to do so in

hospitals, clinics or healthcare facilities. These requests are designed to prevent

possible interference with sensitive medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be

maintained between a handheld wireless device and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with

independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15 cm (6 inches) from their

pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimize the potential for

interference.

• If you have any reason to suspect that interference is taking place, turn OFF your

device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine

if the operation of your wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human

exposure to electromagnetic fields from radio devices. For information on

'International' human exposure to electromagnetic fields, refer to the Zebra

Declaration of Conformity (DoC) at www.zebra.com/doc.

For further information on the safety of RF energy from wireless devices, see

www.zebra.com/responsibility located under Corporate Responsibility.

Europe

This device was tested for typical body-worn operation. Use only Zebra tested and

approved belt-clips, holsters, and similar accessories to ensure EU Compliance.

US and Canada

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this

transmitter must not be co-located or operating in conjunction with any other

transmitter/antenna except those already approved in this filing.

Use only Zebra tested and approved belt clips, holsters, and similar accessories to

ensure FCC Compliance. The use of third-party belt clips, holsters, and similar

accessories may not comply with FCC RF exposure compliance requirements and

should be avoided. The FCC has granted an Equipment Authorization for these model

phones with all reported SAR levels evaluated as in compliance with the FCC RF

emission guidelines. SAR information on these model phones is on file with the FCC

and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.

Handheld Devices

This device was tested for typical body worn operation. Use only Zebra tested and

approved belt-clips, holsters, and similar accessories to ensure FCC Compliance.

The use of third-party belt clips, holsters, and similar accessories may not comply with

FCC RF exposure compliance requirements, and should be avoided.

To satisfy US and Canadian RF exposure requirements, a transmitting device must

operate with a minimum separation distance of 1.5 cm or more from a person's body.

Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radio

fréquences, un dispositif de trans une distance de mission doit fonctionner avec

séparation minimale de 1.5 cm ou plus de corps d'une personne.

Laser Devices

Class 2 laser scanners use a low power, visible light diode. As with any very bright

light source such as the sun, the user should avoid staring directly into the light beam.

Momentary exposure to a Class 2 laser is not known to be harmful.

CAUTION:

Use of controls, adjustments, or the performance of procedures other than those

specified herein may result in hazardous laser light exposure.

Scanner Labeling

Labels Read:

1. LASER LIGHT – DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT.

2. CAUTION - CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE

BEAM.

3. COMPLIES WITH 221CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS

PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN

60825-1:2014.

LED Devices

Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN

62471:2008.

Pulse duration: 1.7ms for MC93XX Mobile Computer with SE4750.

Pulse duration: Continuous Wave for MC93XX Mobile Computer with SE4850.

Power Supply

Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power

supply with electrical ratings: Output 5.4 VDC, min 1.8 A, with a maximum ambient

temperature of at least 50°C. Use of alternative power supply will invalidate any

approvals given to this unit and may be dangerous.

Batteries

Taiwan - Recycling

EPA (Environmental Protection Administration)

requires dry battery producing or importing firms in

accordance with Article 15 of the Waste Disposal

Act are required to indicate the recycling marks on

the batteries used in sales, giveaway or promotion.

Contact a qualified Taiwanese recycler for proper

battery disposal.

Battery Information

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries

according to instructions.

Use only Zebra approved batteries ry charging . Accessories which have batte

capability are approved for use with the following battery model:

• ModelBT-000370 (3.6 VDC, 7,000 mAh)

Zebra approved rechargeable battery packs are designed and constructed to the

highest standards within the industry.

However, there are limitations to how long a battery can operate or be stored before

needing replacement. Many factors affect the actual life cycle of a battery pack, such

as heat, cold, harsh environmental conditions and severe drops.

When batteries are stored over six (6) months, some irreversible deterioration in

overall battery quality may occur. Store batteries at half of full charge in a dry, cool

place, removed from the equipment to prevent loss of capacity, rusting of metallic

parts and electrolyte leakage. When storing batteries for one year or longer, the

charge level should be verified at least once a year and charged to half of full charge.

Replace the battery when a significant loss of run time is detected.

Standard warranty period for all Zebra batteries is one year, regardless if the battery

was purchased separately or included as part of the mobile computer or bar code

scanner. For more information on Zebra batteries, please visit: www.zebra.com/

batterybasics.

Battery Safety Guidelines

The area in which the units are charged should be clear of debris and combustible

materials or chemicals. Particular care should be taken where the device is charged

in a non-commercial environment.

• Follow battery usage, storage, and charging guidelines found in the user's guide.

• Improper battery use may result in a fire, explosion, or other hazard.

• To charge the mobile device battery, the battery and charger temperatures must

be between +32°F and +113°F (0°C and +45°C).

CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT ST ARE INT O THE BEAM.

ATTENTION-LUMIÉRE LASER DE CLASSE 2 EN CAS D'OUVERTURE. NE PAS REGARDER

DANS LE FAISCEAU. VORSICHT- LASERLICHT KLASSE 2 WENN ABDECKUNG GEÖFFNET.

NICHT IN DEN STRAHL BLICKEN. COMPLIES WIT H 21CFR1040.10 & 1040.11 EXCEPT

FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND

IEC/EN 60825-1:2014.

◰

ݹ䗀ሴⴤ㿶ݹ ᶏ 2㊫

◰

ݹӗ ૱

LASER LIGHT - DO NOT ST ARE INTO BEAM. CLASS 2 LASER PRO DUCT .

LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2. LUMIÉRE

LASER - NE PAS REGARDER DANS LE FAISCEAU. APPAREIL À LASER DE

CLASSE 2. 630-680nm, 1mW

⌘᜿˖ᢃᔰᰦ৺㚄䬱ཡ᭸ᰦᴹ㊫◰ݹ䗀ሴⴤ㿶ݹᶏ

Produkt Specifikationer

Mærke:	Zebra
Kategori:	Stregkodelæser
Model:	MC930B-GSEAG4RW
Kode for international beskyttelse (IP):	IP65, IP67
Bredde:	88 mm
Dybde:	240 mm
Højde:	189 mm
Vægt:	765 g
Produktfarve:	Sort
Batterispænding:	3.6 V
Batterikapacitet:	7000 mAh
Skærm diagonal:	4.3 "
Skærmopløsning:	800 x 480 pixel
Berøringsskærm:	Ja
Kompatible hukommelseskort:	MicroSD (TransFlash), SDHC, SDXC
Wi-Fi:	Ja
Datanetværk:	Ikke understøttet
Bluetooth:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Antal USB 2.0-porte:	1
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Driftstemperatur (T-T):	-20 - 50 °C
Sikkerhedsalgoritmer:	EAP-TLS, EAP-TTLS, FIPS 140-2, LEAP, MSCHAPv2, WEP, WMM, WPA, WPA-AES, WPA-Enterprise, WPA-TKIP, WPA2, WPA2-Enterprise
Intern hukommelse:	4 GB
Operativsystem installeret:	Android
Bluetooth-version:	5.0
Near Field Communication (NFC):	Ja
Sensor for omgivende lys:	Ja
LED-indikatorer:	Ja
Version af operativsystem:	8.1
Harmoniseret systemkode (HS):	84713000
Processorfrekvens:	2.2 GHz
Processorserie:	Snapdragon
Flash-hukommelse:	32 GB
Indbygget mikrofon:	Ja
Processorproducent:	Qualcomm
Processormodel:	660
Maksimal størrelse på hukommelseskort:	256 GB
Accelerometer:	Ja
Bluetooth Low Energy (BLE):	Ja
Berøringsskærmstype:	Kapacitiv
Højttalere:	Ja
Berøringsteknologi:	Dual-touch
Indbygget processer:	Ja
Push-to-Talk (PTT):	Ja
Stødsikker:	Ja
Antal kerner:	8