Zephyr PBI-1100A Manual

Zephyr Emhætte PBI-1100A

Læs nedenfor 📖 manual på dansk for Zephyr PBI-1100A (7 sider) i kategorien Emhætte. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/7
Installaon Manual
Type：
：
：
：：LED Power Supply
（
（
（
（（Families
：
：
：
：：AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP）
）
）
））
Introducon
The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plasc case, and PCB types.
Installaon
（ ）1 Before commencing any installaon or maintenance work, please disconnect the power supply from the ulity.
Ensure that it cannot be re-connected inadvertently!
（ ）2 Keep proper venlaon around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
（ ）3 Mounng orientaons other than standard orientaon or operate under high ambient temperature may
increase the internal component temperature and will require a de-rang in output current. Please refer to
the specicaon sheet to receive the opmum mounng posion and informaon about the -rang curve. de
（ ）4 Current rang of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specicaon.
（ ）5 For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighng
xture is ght so that water cannot intrude into the system.
（ ）6 For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “P” type, require 40mA each unit; for those with “3 in 1” dimming
funcon, e.g. HLG and LPF series, require 0.15mA each unit.
（ ）7 Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
（ ）a Connect the FG wire (green or green/yellow) of the LED power supply to (green or green/yellow), this PE
step can be skipped when the unit is marked class II, ungrounded.
（ ）b Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
（ ）c Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).

Produkt Specifikationer

Mærke: Zephyr
Kategori: Emhætte
Model: PBI-1100A

Har du brug for hjælp?

Hvis du har brug for hjælp til Zephyr PBI-1100A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Emhætte Zephyr Manualer

Zephyr

Zephyr AK0722 Manual

12 December 2024
Zephyr

Zephyr ZRC-01AN Manual

11 December 2024
Zephyr

Zephyr AK0860AS Manual

11 December 2024
Zephyr

Zephyr AK0736BS Manual

11 December 2024
Zephyr

Zephyr ZRC-01OM Manual

11 December 2024
Zephyr

Zephyr AK0754BS Manual

11 December 2024
Zephyr

Zephyr BRC-0007 Manual

11 December 2024
Zephyr

Zephyr Siena Pro ZSP-E36DS Manual

11 December 2024
Zephyr

Zephyr ZRC-00RE Manual

11 December 2024
Zephyr

Zephyr Siena ZSI-E30DS Manual

11 December 2024

Emhætte Manualer

Nyeste Emhætte Manualer

Bosch

Bosch DWK91LT20 Manual

21 December 2024
Kaiser

Kaiser A 6315 ElfEm Eco Manual

21 December 2024
Kaiser

Kaiser AT 9430 F Eco Manual

21 December 2024
Novy

Novy 7215 Manual

20 December 2024
Samsung

Samsung HDC9675UG Manual

20 December 2024
Cecotec

Cecotec Bolero Flux TT 608000 Slim Manual

20 December 2024
Kaiser

Kaiser AI 7418 Eco Manual

20 December 2024
Kaiser

Kaiser A 6315 SilEm Eco Manual

20 December 2024
Kaiser

Kaiser EA 745 Eco Manual

20 December 2024
Kaiser

Kaiser AT 8435 Eco Manual

20 December 2024