ZKTeco AQD-L100 Manual


Læs nedenfor 📖 manual på dansk for ZKTeco AQD-L100 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Product Specications
Product Description
Display method: Common Screen display
Atmospheric pressure: 86Kpa to 106Kpa
Detection method for CO2: Infrared (NDIR)
Sampling time: 1.5 seconds
Product Size: 190*80*52mm
Detection temperature: -10°C to 50°C
Relative humidity: 20% to 85%
Storage temperature: -10°C to 60°C
Concentration unit for CO2: PPM
Power source: Lithium battery with 3000 mAh capacity;
5V DC power charging via micro USB port
This product is an air quality monitor that detects Carbon
dioxide (CO2), Temperature, and Humidity. it combines
sensors real-time monitoring of Carbon dioxide (CO2),
temperature, and humidity on its display.
Considerations Instructions
Please read the instructions carefully before using this
device.
Please let the device work short mins outdoors before
use for most accurate results.
Please keep the manual handy for quick reference and
troubleshooting.
When you long-press the power button, the air quality
monitor will boot up.
1. Power button, long press to turn on/o, 2 times-click to
enter time setting.
2. Right button, Single click to switch Celsius and
Fahrenheit.
3. Left button, long-press to turn on/o Alarm soud.
(when turn on alarm function, it would beep sound
once CO2 value more than 1000PPM)
4. USB charging port.
Time setting
In the power-on state, short press 2 times power button
to enter the Date and time mode;
click the left or right buttons to adjust the Years;
then click the power button to switch to Months,
click the left or right buttons to adjust the Months;
then click the power button to switch to days,
click the left or right buttons to adjust the days;
then click the power button to switch to Hours,
click the left or right buttons to adjust the hours;
then click the power button to switch to minutes,
click the left or right buttons to adjust the minutes;
then click the power button to switch to seconds,
click the left or right buttons to adjust the seconds.
After adjustment well, click the power button to conrm
and complete the time setting.
Precautions
Avoid covering the air intake areas during use to avoid
inaccurate measurements.
Avoid use of solvents to clean the product as residual
fumes will skew air quality readings.
Avoid water or other liquids near the product to avoid
electrical damage.
Do not allow unauthorized modication or repair of this
product.
Features
- Common Screen display
- Test variables: Carbon dioxide (CO2), temperature, humidity
- Large 3000mAh capacity Lithium battery
- 5V Micro USB charging
- Low battery warning
1. Start Up
2 3 4 5 6
3. Parameters
Product List
Air Quality monitor x 1
Micro USB charging cable x 1
Product Manual x 1
CO2 technical indicators
Measuring range: 400 to 5000PPM
Sensor for CO2: Infrared (NDIR)
Resolution: 1 PPM
Measuring range: -10 to 50°C
Measurement accuracy: ±1°C
Humidity range: 20% to 85% RH
Measurement accuracy: ±4% RH
Temperature and humidity technical indicators
When low battery icon is displayed, the device needs to
be charged. Insert the included or another compatible
micro USB charging cable into the device. Attach the
other end to a USB DC charger (such as a smart phone
charger) that outputs DC 5V at >=1000mA. Fully charge
for at least 2-3 hours before use. Avoid charging with a
USB computer port which only outputs 500mA.
2. About Charging
Product Key Function Description
Version: 1.0
User Manual
Air Quality Detector AQD-L100
Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.
Ctra. Fuencarral 44. Edicio 1, Planta 2.
28108 Alcobendas, Madrid. Spain
Phone: +34 916 532 891
Mail: sales@zkteco.eu
www.zkteco.eu


Produkt Specifikationer

Mærke: ZKTeco
Kategori: Ikke kategoriseret
Model: AQD-L100

Har du brug for hjælp?

Hvis du har brug for hjælp til ZKTeco AQD-L100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret ZKTeco Manualer

ZKTeco

ZKTeco G5 Manual

3 September 2024
ZKTeco

ZKTeco FBL2211 Manual

15 August 2024
ZKTeco

ZKTeco ProRF-T Manual

15 August 2024
ZKTeco

ZKTeco inPulse+ Manual

15 August 2024
ZKTeco

ZKTeco FR1500S Manual

15 August 2024
ZKTeco

ZKTeco InBio Pro Manual

15 August 2024
ZKTeco

ZKTeco iClock S880 Manual

14 August 2024
ZKTeco

ZKTeco iClock 700 Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Wagner

Wagner 2K Smart Manual

4 November 2024
Moen

Moen EB500-E Manual

3 November 2024
Moen

Moen Aspen 5824CH Manual

3 November 2024
Luxman

Luxman MQ-88uSE Manual

3 November 2024
Luxman

Luxman CL-38uSE Manual

3 November 2024
Luxman

Luxman CL-1000 Manual

3 November 2024
Moen

Moen Aspen 5802CH Manual

3 November 2024
Luxman

Luxman SQ-38u Manual

3 November 2024
Moen

Moen Aspen 5818CH Manual

3 November 2024