ZKTeco SBTL3200 Manual
ZKTeco
Adgangskontrolsystem
SBTL3200
Læs nedenfor 📖 manual på dansk for ZKTeco SBTL3200 (19 sider) i kategorien Adgangskontrolsystem. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/19
Swing Barrier Instructions
Applicable Models: SBTL 2000 / 3000
Version: 1.0 Date: Nov. 2016
Contents
Chapter 1 Product Introduction...................................................................................................... 2
1.1 Model number and access control..................................................................................2
1.2 Chassis and dimensions.................................................................................................. 2
1.3 Mechanical system of the swing barrier........................................................................ 3
1.4 Electronic control system................................................................................................. 3
1.5 The working principle of swing barrier........................................................................... 4
1.6 System composition of the product................................................................................ 4
Chapter 2 The installation of the product..................................................................................... 6
2.1 Installation notes................................................................................................................ 6
2.2 Installation position of the swing barrier........................................................................ 6
2.3 Cables Installation and Fixation...................................................................................... 7
Chapter 3 Menu Operation............................................................................................................. 9
3.1 Menu.................................................................................................................................... 9
3.2 Wiring diagram and function..........................................................................................14
Chapter 4 Common failure analysis............................................................................................17
Chapter 5 Product maintenance..................................................................................................18
5.1 Chassis maintenance..................................................................................................... 18
5.2 Movement maintenance................................................................................................. 18
5.3 Power maintenance........................................................................................................ 18
Chapter 1 Product Introduction
1.1 Model number and access control
Access
Model
NO
C3-200 with two
KR100E reader
inBIO260 with two FR1200/ID
reader
SBTL2000
√
SBTL2011
√
SBTL2022
√
SBTL3000
√
SBTL3011
√
SBTL3022
√
1.2 Chassis and dimensions
SBTL2000/3000 series, with stainless steel housing, provide simple and beautiful design with
anti-corrosion. It is provide orderly and civilized passage to people while eliminating illegal personnel
access. In case of emergency, it ensures timely evacuation channel smoothly and convenient personnel.
SBTL2000’s appearance and dimensions are as shown in figure 1-2A：
SBTL3000’s appearance and dimensions are as shown in figure 1-2B：
Figure1-2A
Figure1-2B
1.3 Mechanical system of the swing barrier
The mechanical system of a swing barrier turnstile includes the chassis and the core component. The
chassis is a carrier where the direction indicator, the read-write device, the Infrared sensor, and the door
locks is installed. The core component mainly consists of the electric motor, the frame, the belt, and the
swing boom.
1.4 Electronic control system
The electronic control system of a swing barrier turnstile is mainly composed of the reader, master control
panel, access controller, infrared sensor, direction indicator, alarm, and the transformer.
Reader The reader reads the data onto the card and sends it to the controller.：
Master control panel: The master control panel is the system’s control center that receives signals from
the reader and the photoelectric switch, performs logical judgment and processing of these signals, also
sends executive commands to the direction indicator, electric motor and alarm.
Infrared sensor: It detects the position of a pedestrian and plays the role of safety protection.
Direction indicator: This indicator displays the current status of the sign of the channel, and directs the
pedestrian to pass through the channel in a safe and orderly manner.
Alarm: The alarm gives an alarm message if the system detects any unauthorized entry to the channel.
1.5 The working principle of swing barrier
1.5.1 After powered on, the system performs self-check. If no failure is detected, the machine starts to
operate normally. If a failure is detected, the system displays related messages on the LCD Display
screen so that the user can have a quick knowledge of and solve the problem.
1.5.2 When the reader detects a valid card, the buzzer will give a nice audible prompt to the pedestrian,
indicating that the card is being read successfully. And then, the reader sends signals to the access
controller to request permission to pass through the passage.The access controller will send the signal to
the master control panel.
1.5.3 After receiving the signal from the access controller, the master control panel sends valid control
signals to the direction indicator and the electric motor. And the direction arrow turns green.
1.5.4 Pedestrians pass through the channel according to the direction indicator signs, infrared sensors
detect the pedestrians pass through the whole process, and continue to send signal to the master control
board until the pedestrian has been completely through the channel.
1.5.5 If the pedestrian enters the channel but forgets to have the card read by the reader, or the card held
by the pedestrian is invalid, that the system will stop the pedestrian , and give an audible alarm until the
pedestrian retreats from the channel. The pedestrian can pass through the channel only after a valid card
is read by the card reader.
1.6 System composition of the product
The single-channel management system is composed of two single-core swing barrier turnstiles.The
mufti-channel management system is composed of two single-core barriers and multiple dual-core
barriers.
1.6.1 Working modes of the system
To meet the requirements for use for different places, this system provides multiple working modes for the
user.Including fire protection mode, normal working mode, testing mode,. The parameters can be set by
using three built-in keypads ("ENT", "UP", and "DOWN") on the master control panel.
Option 16 in the menu is configurable using the values 0, 1, and 2.
If 0 is used, the system is being under the normal mode and does not detect the fire protection signals.
If the detected fire protection signal is a pulse signal, the value is set to 1. Once this pulse signal is
Chapter 2 The installation of the product
2.1 Installation notes
2.1.1 It is recommended that the swing barrier turnstile should be installed on a cement platform with
50mm to 100mm in height.
2.1.2 It is recommended that the swing barrier turnstile should not be used in corrosive environment.
2.1.3 Make sure the protective earth wire of the system is reliably connected to avoid personal injuries or
other accidents.
2.1.4 After installation, check whether connection is reliable at the connecting points of the protective
earth wire, at the connector assemblies and wiring points of the circuits, as well as at each movable part
of the swing barrier turnstile. Any loose nuts, screws and other fasteners should be tightened in time to
avoid swing barrier turnstile failures caused by long-time operations.
2.2 Installation position of the swing barrier
The installation position depends on the size of the swing barrier.If the swing barrier turnstile is installed
near a wall, a distance from100mm between the swing barrier turnstile and the wall needs to be reserved
for ease of opening the top cover of the machine to perform maintenance and adjustment. The master
and slave of a SBTL2000 swing barrier turnstile may either form a channel, or form two channels with a
SBTL2200 swing barrier turnstile,as shown in figure 2-2A;
Figure2-2A SBTL2000 Single channel and dual channel
The master and slave of a SBTL3000 swing barrier turnstile may either form a channel, or form two
channels with a SBTL3200 swing barrier turnstile,as shown in figure 2-2B;
Figure2-2B SBTL3000 Single channel and dual channel
2.3 Cables Installation and Fixation
For the outlets of the concealed cables, please refer to the drawing showing the mounting holes.The input
voltage for this swing barrier turnstile is AC100-120V/200-240V and its master and slave are connected
by a 6-core cable. When installing this swing barrier turnstile, the user only needs to connect it to the
corresponding ports.Note that the PVC conduits are buried 100mm below the ground, with the height of
the exposed part not exceeding 100mm. In addition, the conduit outlet is bent back to prevent ingress of
water into the conduit.
SBTL2000 installation holes and cabling positions as shown in Figure 2-3A.
SBTL3000 installation holes and cabling positions as shown in Figure 2-3B.
Figure 2-3A
Chapter 3 Menu Operation
3.1 Menu
3.1.1 There are 4 keys on the LCD screen, including "UP", "DOWN", ""ENT"", and "ESC".
"UP" and "DOWN" are reset keys, each of which has two functions. When menu operations are not used,
"UP" and "DOWN" can be used to open the barrier to left or right.When you press the "ENT" key, the
system will prompt you to enter the password, the password is "UP" press two, "DOWN" press four, then
press "ENT" to enter the menu operation system.
After the "ENT" key is pressed to enter the menu operation system, "UP" and "DOWN" cannot be used to
open the barrier to left or right, but used for moving up and down on the menu to select an option.
3.1.2 Press "ENT" and the menu operation interface is displayed.、
The menu has the following options:
1) Device mode: This option is used to set the panel to be a master control panel or a slave control
panel.
0: master
1: slave.
The master receives and judges the infrared signals. The slave does not receive or judge the infrared
signals.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the value you want. Finally
press "ENT" to confirm.
2) Max motor ran time :The electric motor stops running and an alarm is given when the actual running
time to exceed this value. This value is set to prevent long-time operation of the motor under no load
caused by a mechanical failure. The default value is 3 seconds.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the value you want. Finally
press "ENT" to confirm.
3) Open duration: If the pedestrian swipes the card but does not pass through the channel, the system
will automatically close the barrier after this time period has elapsed. The default value is 10
seconds.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press"ENT"to confirm.
4) Opening mode: The barrier can be opened in the following modes:
0: card swiping at both entry and exit.
1: card swiping at entry and infrared at exit.
2: infrared at entry and card swiping at exit.
3: infrared at both entry and exit.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press "ENT" to confirm.
5) False direction entry: This option is used to set whether to alarm and whether to make a
corresponding judgment and give a voice message when a pedestrian enters the channel in the
reserve direction.
0: cancel the function
1: immediately close the barrier and alarm once detect reverse entry.
2:only alarm once detect reverse entry.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press "ENT" to confirm.
6) Anti tailgate: This option is set to detect whether the pedestrian is tagged along, and to play a voice
prompt or take other actions if the pedestrian is stalked by strangers.
0: cancel the detection
1: set the detection
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press "ENT" to confirm.
7) Set barrier position:
1: zero position. the position when the barrier is closed（ ）
2: left open position. (the position when the barrier is open to left)
3: right open position. (the position when the barrier is open to right)
Methods for setting the zero position of the swing boom: First press "ENT" and the menu is displayed.
Then press "UP" to move to Option 7 on the menu. Press "ENT" to make it available for value modification
and then press "UP" to set the value to 1. Turn the swing boom to the desired zero position
（ ， ）Perpendicular to the chassis allowable deviation of 1 degrees . Finally press "ENT" and the system
gives a restart prompt. Zero calibration is finished.
Procedures for setting the left opening position of the swing boom: First press "ENT" and the menu is
displayed. Then press "UP" to move to Option 7 on the menu. Press "ENT" to make it available for value
modification and then press "UP" to set the value to 2. Move the swing boom of the gate to the desired
position on the left-hand side. Finally press "ENT" and the system will record this position as the left open
position.
Procedures for setting the right opening position of the swing boom: First press "ENT" and the menu is
displayed. Then press "UP" to move to Option 7 on the menu. Press "ENT" to make it available for value
modification and then press "UP" to set the value to 3. Move the swing boom of the gate to the desired
position on the right-hand side. Finally press "ENT" and the system will record this position as the right
opening position.
8) Language options:
0 simplified Chinese.：
1 English：
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press "ENT" to confirm.
9) Opening speed : Setting the speed of opening the barrier .The speed ranges from 4 to 10.
Specific operations are as follows：
Press "ENT" key to enter the menu and then press "UP/DOWN" to select the function you want.
Finally press "ENT" to confirm.
10) Close barrier time: It is the delay after which system automatically closes the barrier after the
pedestrian passes through the channel and triggers the last infrared sensor. The unit of this delay is
second, the maximum value is 6. The default value is 0, which means that the barrier is closed
Produkt Specifikationer
| Mærke: | ZKTeco |
| Kategori: | Adgangskontrolsystem |
| Model: | SBTL3200 |
Har du brug for hjælp?
Hvis du har brug for hjælp til ZKTeco SBTL3200 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Adgangskontrolsystem ZKTeco Manualer
2 September 2024
2 September 2024
16 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
Adgangskontrolsystem Manualer
- Adgangskontrolsystem Abus
- Adgangskontrolsystem Burg Wächter
- Adgangskontrolsystem Yale
- Adgangskontrolsystem Viking
- Adgangskontrolsystem Marmitek
- Adgangskontrolsystem ASSA ABLOY
- Adgangskontrolsystem Hikvision
- Adgangskontrolsystem Eminent
- Adgangskontrolsystem Provision-ISR
- Adgangskontrolsystem Panduit
- Adgangskontrolsystem Axis
- Adgangskontrolsystem ACTi
- Adgangskontrolsystem EQ-3
- Adgangskontrolsystem Iogear
- Adgangskontrolsystem Vimar
- Adgangskontrolsystem Chief
- Adgangskontrolsystem Dahua Technology
- Adgangskontrolsystem Speco Technologies
- Adgangskontrolsystem Delta Dore
- Adgangskontrolsystem Geovision
- Adgangskontrolsystem Safescan
- Adgangskontrolsystem DSC
- Adgangskontrolsystem Iget
- Adgangskontrolsystem EverFocus
- Adgangskontrolsystem Satel
- Adgangskontrolsystem ETiger
- Adgangskontrolsystem Suprema
- Adgangskontrolsystem HID Identity
- Adgangskontrolsystem Indexa
- Adgangskontrolsystem ONE Smart Control
- Adgangskontrolsystem Gewiss
- Adgangskontrolsystem SOREX
- Adgangskontrolsystem Atlantis Land
Nyeste Adgangskontrolsystem Manualer
5 Januar 2025
31 December 2025
29 December 2024
22 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
9 December 2024
9 December 2024