ZKTeco uFace401 Manual

ZKTeco Ikke kategoriseret uFace401

Læs nedenfor 📖 manual på dansk for ZKTeco uFace401 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
1. Overview
5.
Quick Flows
1) Recommended Standing Position
2) Registration
a. Recommended Registration and Verication Position
b. Factors Aecting the Preciseness of Verication
b. View records on computer (Main Menu USB Manager Download Attendance Data)  
a. View records in the device (Main Menu Attendance Search Attendance Records) 
b. Shortcut Key Mappings (Main Menu Personalize Shortcut Key Mappings)  
a. Date Time (Main Menu Date Time) System
2) Locations Unrecommended
Recommended Procedures (as shown in the left image):
During registration and verication procedures,
the position of device should not be changed to
prevent reduction in verication preciseness. If
it is necessary to move the device, its vertical
height should not be changed.
1) Put the mounting template sticker onto the wall, and drill holes according to the mounting paper.
2) Fix the back plate onto the wall using wall mounting screws.
3) Insert the device into back plate.
4) Use security screw to fasten the device to back plate.
For user heights between 1.5m to 1.8m, it is recommended to
install the device at 1.15m above ground (may be modied
according to user average height).
b. During verification, it is required to show your face in the center of the screen
and fit your face into the green frame in the screen.
Non-identical registration and verication gestures
Non-identical registration and verication
distances from device
Non-identical registration and verication heights
a. Face Verication Mode
To avoid deleting data by misoperation, you can backup data to local or usb disk at any time.
Enter Main Menu Data Management Backup Data, select the saving type and data  
type to backup.
b. Fingerprint Verication Mode
c. Password Verication Mode
Left Side
Front
Back
a. During registration, it is required to adjust your upper body to t your
eyes into the green frame on the screen.
8. Troubleshootings
7. Other Settings
6. Backup Data
1. The face cannot be recognized by the device in verication.
Solutions
a. Check if your facial expression, standing posture and distance during verication are the same
with that in enrollment.
b. Check if the device is under direct sunlight or near the windows.
2. Verication fails as user wears glasses during verication but not in face enrollment.
Solution
You can enroll your face wearing glasses in the rst or second time of face capturing, since the
device supports 3 times of capturing face templates.
3. The device makes a misjudgment in verication.
Solution
There is a certain probability of misjudgment. You can re-enroll your face.
RF Card & Facial Terminal
Fingerprint & Facial Terminal
2.Installation Environment
3. Installation Steps
4. Cautions on Using Face Recognition Device
Touch Screen
Fingerprint
Sensor
Camera
Battery Slot
TCP/IP
Power
RS485/232
Door Sensor
Bell
Tamper Alarm Button
Power Key
Reset key
USB Interface
Card Reader
Tamper Alarm Button: Once the tamper alarm button is released, the system make will a
warning sound and the will be displayed in the status bar of the initial interface. There
will be no alarm signal while the button is pressed.
3) Verication (1:1 verication mode for example）4) Viewing Attendance Records
Click to enter 1:1 verication mode on initial interface.
Enter User ID and press [OK]. When multi-verication mode is registered, please
choose the verify mode as the gure above:
password, ngerprint and face.
567
123
b. Enroll Normal Users (same steps with enrolling adminnistrator except the “User Role” option.)
a. Enroll Administrator (Main Menu
User Management New User)
2) Communication Settings (Main Menu Communication)
User ID: Enroll user ID; it supports 1-9 digits of numbers.
Name: Enroll name; it supports 1-12 digits of any
characters.
Use Role: Select the user role between Normal User and
Super Admin.
Fingerprint : Enroll a ngerprint or ngerprints.★
Face: Enroll a face according to the prompts of screen
and voice.
Badge Number : Enroll a badge by swiping a badge.★
Password: Enroll the password; it supports 1-9 digits of
numbers.
User Photo: Enroll the user photo which will be
displayed after verication .
Access Control Role: Set the Access Conrtol parameters
of a user.
Ethernet: The device can communicate with PC via the
Enthernet parameters.
Serial Comm: The device can communicate with PC via
the serial port according to the parameters you set.
PC Connection: Set the password and device ID so that
you can connect the device with software in PC.
Cellular Data Network : When the device is applied on ★
a dial-up network, ensure that the device is within the
coverage of the mobile network signals (GPRS/3G).
ADMS Setting : Settings used for connecting with ★
ADMS server.
Wi-Fi Setting : The device provides a Wi-Fi module, ★
which can be built in the device mould or externally
connected, to enable data transmission via Wi-Fi and
establish a wireless network environment.
Wiegand Setup: Set wiegand-out parameters.
Access Control Options: Including Door Lock Delay,
Door Sensor Delay, Door Sensor Type, Door Alarm
Delay, Retry Times to Alarm, NC / NO Time Period etc.
Time Schedule: Schedule Doors’ opening time, 50 time
zones are available to dene.
Holidays: Set special time zones for holidays.
Access Groups: Set to manage employees in groups.
Combined Verication: Set various groups into a
combined access group to achieve multi-verication.
Duress Options: Set duress function options.
4
Enter the user ID to search. Select the time range for attendance record query.
Tap the record in green to view its details. The above gure shows the details of this record.
Insert the usb disk correctly, download the
attendance data to the disk, then upload that
from the disk to your computer. The
downloaded data is named ”Device Serial
Number.dat”, you can open and view it.
Select the content to be backed up.
Shortcut keys can be dened as punch state keys or menu function key. When the device is on
the main interface, pressing the set shortcut key will display the attendance state or enter the
menu operation interface.
Tap the shortcut key to be set Tap the main interface to show the shortcut menu.
Set the date, time and time format for the device.
Access Control Setting (Main Menu Access Control):
NOTE: Not all products have the function with , the real product shall prevail.★
1.15m
F1/F4
F2/F5
F3/F6
1) Recommended Installation Location
3m
1.15m
3m
1.15m
0.5m
1.15m
1.15m
0.5m0.5m
1.15m
1.15m
1.15m
1.15m
1.15m
1.15m
1.15m
0.5m
0.5m
0.5m0.5m0.5m
0.3m0.5m
Non-identical registration and verication
distances from device
Enroll Administrator and Users
Communication Settings
Punch/Verify
View Records
1) Enroll Administrator and Users
Quick Start Guide
4.3-inch Touch Screen & Facial Attendance Terminal
Direct sunligt Direct sunligt Indirect sunlight Too close to
in outdoors through window through window light xtures
Enroll Verify
Enroll Verify
Enroll Verify
Enroll Verify Enroll Verify
Install the device indoors , and 6.5 feet (2m) from
light xtures. It is not recommended to install it
near windows or outdoors.
1.15m
Version: 1 1.

Produkt Specifikationer

Mærke: ZKTeco
Kategori: Ikke kategoriseret
Model: uFace401

Har du brug for hjælp?

Hvis du har brug for hjælp til ZKTeco uFace401 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret ZKTeco Manualer

ZKTeco

ZKTeco G5 Manual

3 September 2024
ZKTeco

ZKTeco ZKTime Small Business Manual

16 August 2024
ZKTeco

ZKTeco FBL2211 Manual

15 August 2024
ZKTeco

ZKTeco ProRF-T Manual

15 August 2024
ZKTeco

ZKTeco inPulse+ Manual

15 August 2024
ZKTeco

ZKTeco FR1500S Manual

15 August 2024
ZKTeco

ZKTeco InBio Pro Manual

15 August 2024
ZKTeco

ZKTeco GoTime Cloud Manual

14 August 2024
ZKTeco

ZKTeco iClock S880 Manual

14 August 2024
ZKTeco

ZKTeco iClock 700 Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SKROSS

SKROSS World Adapter Pro+ Manual

26 November 2024
SKROSS

SKROSS PRO – World & USB Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024