ZyXEL SFP-BX1490-10-D Manual

ZyXEL Skifte SFP-BX1490-10-D

Læs nedenfor 📖 manual på dansk for ZyXEL SFP-BX1490-10-D (5 sider) i kategorien Skifte. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/5

Datasheet Fiber Transceiver Accessories

The Zyxel transceiver family follows industry standards to assure

compatibility with switches from other manufacturers without barrier set

by proprietary technologies. The comprehensive product range including

Gigabit and 10 Gigabit transceiver, also Direct Attached Cable 1 M/3 M allows

users to plug the proper model onto the network to extend the physical

coverage easily.

Beneﬁts

Hot-swappable design facilitates network maintenance

Independent transceiver design provides the highest network maintenance

ﬂexibility. Transceivers can be freely added when required, and infrastructure

upgrades or transceiver repairs can be done easily by just replacing the

transceiver instead of the whole device.

Bi-directional transceivers maximizes usage of existing

ﬁber plant

Traditional ﬁber optic networking requires two strands of ﬁber to accomplish

communications, in which one strand is reserved for sending signals, while

the other is for receiving. On the other hand, bi-directional, dual-wavelength

transceivers can establish communications over just one strand of ﬁber by

using two separate optical wavelengths: one receives and the other transmits

signals. Transmission capacity can be expanded immediately without

additional cost laying new ﬁber.

Fiber Transceiver Accessories

Hot-Pluggable with maximum

ﬂexibility

Low power dissipation, high

network stability

Industry standard compliance

802.3z SFP Multi-Source

Agreement (MSA) compliance

Compact size, high port

density

Produkt Specifikationer

Mærke:	ZyXEL
Kategori:	Skifte
Model:	SFP-BX1490-10-D
Bredde:	56 mm
Dybde:	13.4 mm
Højde:	12.46 mm
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 70 °C
Netværksstandarder:	IEEE 802.3ah
Indgangsspænding:	3.3 V
Maksimal dataoverførselshastighed:	1000 Mbit/s
SFP modtagertype:	Fiberoptisk
Grænsefladetype:	SFP
Fiber optisk strømstik:	LC
Maksimal overførselsafstand:	10000 m
Bølgelængde:	1490 nm
SFP transceiver standard:	BX
Hot-swap:	Ja