Acer B227QB Manual

Acer Skærm B227QB

Læs nedenfor 📖 manual på dansk for Acer B227QB (2 sider) i kategorien Skærm. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn o󰀨 the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn o󰀨 your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or VGA (optional) and/
or HDMI (optional) input socket of the monitor, and the VGA (optional)
and/or DP (optional) and/or HDMI (optional) output socket of the graphics
card on the computer. Then tighten the thumbscrews on the signal cable
connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor
and the line-out port on the computer with the audio cable.
5. Insert the monitor power cable into the power port at the back of the
monitor.
6. Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
USB
VGA
VGA
Adaptive SYNC (HDMI/DP):
It can allow a Adaptive SYNC supported graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power e󰀩cient, virtually stutter free and low-latency display update.
1
2
3
4
5
External controls
1 Power button Turns the monitor on/o󰀨.Blue indicates power on. Amber indicates standby/ power saving
mode.


Produkt Specifikationer

Mærke: Acer
Kategori: Skærm
Model: B227QB

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer B227QB stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skærm Acer Manualer

Skærm Manualer

Nyeste Skærm Manualer

AOpen

AOpen d-TILE DT22M-O Manual

20 November 2024
SWIT

SWIT M-1093H Manual

20 November 2024
BookIT

BookIT 07A Manual

19 November 2024
Eizo

Eizo FDS1702N Manual

18 November 2024
Dynaudio

Dynaudio BM6A Manual

17 November 2024
Hannspree

Hannspree HO 220 PTA Manual

17 November 2024