Acer BE320QK Manual

Acer Skærm BE320QK

Læs nedenfor 📖 manual på dansk for Acer BE320QK (4 sider) i kategorien Skærm. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the MiniDP-MiniDP and/or MHL (optional)
and /or DP (optional) and/or HDMI (optional) input socket of the
monitor, and the MiniDP-MiniDP and/or MHL (optional) and/or DP
(optional) and/or HDMI (optional) output socket of the graphics card
on the computer. Then tighten the thumbscrews on the signal cable
connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
FreeSync (HDMI/DP):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
1
2
3
4
5


Produkt Specifikationer

Mærke: Acer
Kategori: Skærm
Model: BE320QK

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer BE320QK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skærm Acer Manualer

Skærm Manualer

Nyeste Skærm Manualer

AOpen

AOpen 24SB2Y H Manual

3 December 2024
AOpen

AOpen 24SB2Y E Manual

3 December 2024
AOpen

AOpen 27CL2 E Manual

3 December 2024
AOpen

AOpen 27CL1 E Manual

3 December 2024
AOpen

AOpen 27CV1 H Manual

3 December 2024
AOpen

AOpen 27E1 Manual

3 December 2024
AOpen

AOpen 27DE0 Manual

3 December 2024
AOpen

AOpen 24VT0Y Manual

3 December 2024
AOpen

AOpen 24ML1Y Manual

3 December 2024
AOpen

AOpen 24MX1 Manual

3 December 2024