Acer HL-4K50 Manual

Acer Beamer HL-4K50

Læs nedenfor 📖 manual på dansk for Acer HL-4K50 (61 sider) i kategorien Beamer. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/61
Copyright © 2023. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 08/2023
Acer DLP Projector
PL3510ATV/FL251/LU-P251F/PF-L251F/
LR560ATV/ML-470ATV/PL3510Z/
HL6510ATV/HL6510Z/PL3511ATV/
PL3512ATV/HL6511ATV/HL6515ATV/
A1P2303/XL3510i/FL350/LU-P350F/PF-
L350F/LR560i/ML-470i/XL3511i/HL6510i/
HL6511i/A1P2301/HL6810ATV/EL8610a/
HL-4K10a/EL381/HL381/GL810a/VL-710a/
LR810a/ML-710a/PL3810Z/PL3810ATV/
HL6810AX/HL6811ATV/HL6810/EL8610/
HL-4K50/LU-P800K/HL380/GL810/VL-710/
LR810/ML-710/PL3810/PL3811/HL6810X/
HL6811/A4K2304/PL3510i/FL351/LU-
P351F/PF-L351F/LR561i/ML-471i/PL3510i/
HL6512i/HL6513i/A1P2302
Series User's Guide
Acer Projector
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI
Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
iii
Information for Your Safety and
Information for Your Safety and
Information for Your Safety and
Information for Your Safety and Information for Your Safety and
Comfort
Comfort
Comfort
ComfortComfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
Warnings!
Warnings!
Warnings!Warnings!
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices.
Using electrical power
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The groundin
Warning! The groundin
Warning! The groundin
Warning! The groundinWarning! The grounding pin is a safety featur
g pin is a safety featur
g pin is a safety featur
g pin is a safety featurg pin is a safety feature. Using a power out
e. Using a power out
e. Using a power out
e. Using a power oute. Using a power outlet that is
let that is
let that is
let that is let that is
not properly grounded may
not properly grounded may
not properly grounded may
not properly grounded maynot properly grounded may result in electric shock and/or injury.
result in electric shock and/or injury.
result in electric shock and/or injury.
result in electric shock and/or injury. result in electric shock and/or injury.
Note: The grounding pin also provi
Note: The grounding pin also provi
Note: The grounding pin also provi
Note: The grounding pin also proviNote: The grounding pin also provides good protection from unexpected
des good protection from unexpected
des good protection from unexpected
des good protection from unexpected des good protection from unexpected
noise produced by other nearby electr
noise produced by other nearby electr
noise produced by other nearby electr
noise produced by other nearby electrnoise produced by other nearby electrical devices that may interfere with
ical devices that may interfere with
ical devices that may interfere with
ical devices that may interfere with ical devices that may interfere with
the performance of this produ
the performance of this produ
the performance of this produ
the performance of this produthe performance of this product.
ct.
ct.
ct.ct.
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only thos
Note: Adjust only thos
Note: Adjust only thos
Note: Adjust only thosNote: Adjust only those controls that are covered by the operati
e controls that are covered by the operati
e controls that are covered by the operati
e controls that are covered by the operatie controls that are covered by the operating
ng
ng
ng ng
instruction
instruction
instruction
instructioninstructions, since i
s, since i
s, since i
s, since is, since improper
mproper
mproper
mproper mproper adjustme
adjustme
adjustme
adjustmeadjustment of othe
nt of othe
nt of othe
nt of othent of other contro
r contro
r contro
r contror controls may re
ls may re
ls may re
ls may rels may result in
sult in
sult in
sult in sult in
damage and will often require extensive work by a qualified technician to
damage and will often require extensive work by a qualified technician to
damage and will often require extensive work by a qualified technician to
damage and will often require extensive work by a qualified technician to damage and will often require extensive work by a qualified technician to
restore the product t
restore the product t
restore the product t
restore the product trestore the product to normal condit
o normal condit
o normal condit
o normal condito normal condition.
ion.
ion.
ion.ion.
Warning! For safety reasons,
Warning! For safety reasons,
Warning! For safety reasons,
Warning! For safety reasons,Warning! For safety reasons, do not use non-compliant parts when addi
do not use non-compliant parts when addi
do not use non-compliant parts when addi
do not use non-compliant parts when addi do not use non-compliant parts when adding
ng
ng
ng ng
or changing components. Consult your reseller
or changing components. Consult your reseller
or changing components. Consult your reseller
or changing components. Consult your reseller or changing components. Consult your reseller for purchase options.
for purchase options.
for purchase options.
for purchase options.for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
Do not look into the projector's lens when the light source is on. The bright
light may hurt your eyes.
Turn on the projector first and then signal sources.
Do not place the product in the following environments:
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF. Such environment
RG2 IEC/EN 62471-5:2015
vii
Caution for Listening
To protect your hearing, follow these instructions.
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.
http://www.acer-group.
http://www.acer-group.
http://www.acer-group.http://www.acer-group.com/public/Sustainability/ind
com/public/Sustainability/ind
com/public/Sustainability/ind
com/public/Sustainability/indcom/public/Sustainability/index.htm
ex.htm
ex.htm
ex.htmex.htm
Laser caution
IEC 60825-1:2014: CLASS 1 LASER PRODUCT - RISK GROUP 2.
The product’s intended use as a consumer laser product and compliant with EN
50689:2021.
CLASS 1 CONSUMER LASER PRODUCT
EN 50689:2021
Notice is given to supervise children and to never allow them to stare into
the projector beam at any distance from the projector.
Notice is given to use caution when using the remote control for starting
the projector while in front of the projection lens.
Notice is given to the user to avoid the use of optical aids such as
binoculars or telescopes inside the beam.
viii
First Thing First
First Thing First
First Thing First
First Thing FirstFirst Thing First
Usage Notes
Usage Notes
Usage Notes
Usage NotesUsage Notes
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
Block the slots and openings on the projector provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Precautions
Precautions
PrecautionsPrecautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
Warning:
Warning:
Warning:Warning:
Do not look into the projector's lens when the projector is on. The bright light may
hurt your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
Please do not open or disassemble the product as this may cause electric shock.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
Information for Your Safety and Comfort iii
First Thing First viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 3
Projector Outlook 3
Control Panel 4
Remote Control Layout 5
Getting Started 7
Connecting the Projector 7
Turning the Projector On/Off 9
Turning On the Projector 9
Turning Off the Projector 10
Adjusting the Projected Image 11
Adjusting the Height of the Projected Image 11
How to Get a Preferred Image Size by Adjusting
Distance and Zoom 12
How to Get a Preferred Image Position
by Adjusting Lens Shift (only for selected models) 14
User Controls 15
Installation Menu 15
Onscreen Display (OSD) Menus 16
Color 17
Image 20
Setting 23
Management 28
Audio 30
3D 31
Language 32
Acer Splash Downloader 33
Contents
1
English
Introduction
Introduction
Introduction
IntroductionIntroduction
Product Features
Product Features
Product Features
Product FeaturesProduct Features
This product is a single-chip DLP® projector, including the following
outstanding features:
DLP® technology
Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D
supported
Acer ColorBoost technology delivers vivid, life-like images
High brightness and contrast ratio
Versatile display modes enable optimum performance in any situation
HDTV (720p, 1080i, 1080p) supported
Lower power consumption and economy (ECO) mode extends projector life
Acer EcoProjection Technology delivers Intelligent power management
approach and physical efficiency improvement
Advanced keystone correction delivers optimum presentations
Multi-language Onscreen Display (OSD) menus
Manual focus/zoom projection lens
0.8 ~ 2X digital zoom and pan move function
Microsoft® Windows® 2000, XP, 7, 8, 8.1, 10, Vista®, Macintosh OS, Chrome
OS compliant
CEC (Consumer Electronics Control) function supported
BluelightShield function supported
Adjustable light source power
The projector supports 32:9 aspect ratio when you change the output
resolution of your device to 3840 x 1080 respectively. Unsupported devices:
HDMI 1.4 sources do not support 3840 x 1080. Device compatibility: HDMI
2.0 sources with Intel graphics card.
2
English
Package Overview
Package Overview
Package Overview
Package OverviewPackage Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Note:
Note:
Note:
Note:Note: The package content may differ by regions and models.
Projector Power cord HDMI cable
(Optional)
Security card
(Optional)
Remote control Quick start guide AAA Battery x 2
Carrying case
(Optional)
Wireless dongle
(UWA5) (Optional)
Android TV
dongle (Optional)
Additional AAA
Battery x 2 (for
models with
Android TV
dongle)
3
English
Projector Overview
Projector Overview
Projector Overview
Projector OverviewProjector Overview
Projector Outlook
Projector Outlook
Projector Outlook
Projector OutlookProjector Outlook
Front/upper side
Rear side
#
#
#
## #
#
#
##
Description
Description
Description
DescriptionDescription Description
Description
Description
DescriptionDescription
1 Control panel 5 Power key and Power indicator LED
2 Security slot 6 Lens shift knob
3 Remote control receiver 7 Zoom ring and Focus ring
4 Lens cap 8 Projection lens
#
#
#
## #
#
#
##
Description
Description
Description
DescriptionDescription Description
Description
Description
DescriptionDescription
1 Audio output connector 8 USB A connector (for wireless
dongle)
2 RS232 connector
3 USB A connector (DC 5V output) 9 USB type-C and HDMI connector (for
Android TV dongle)
4 HDMI connector(s)
5 HDMI connector (audio return) 10 Power socket
6 S/PDIF port 11 Tilt adjusting wheel
7 Kensington™ lock port
1
2
4
3
6
5
8
7
1
2
4
3
5
8
7
10
11
1 7 842 3
1 76 94 52 3
Note: Connector
interface is subject to
model's specifications.
4
English
Control Panel
Control Panel
Control Panel
Control PanelControl Panel
#
#
#
## Function
Function
Function
FunctionFunction Description
Description
Description
DescriptionDescription
1 LAMP Lamp indicator LED.
2 POWER Power indicator LED
3 Keystone Adjusts image distortion caused by tilting projection.
4 Power key Refer to the "Turning the Projector On/Off" section.
5 ENTER Confirms your selection of items.
6 BACK Cancels your selection, or goes back to previous page.
7 TEMP Temperature indicator LED.
8 SOURCE Changes the active source.
9 Four directional
selection keys
Selects items or makes adjustments to your selection
10 MENU Launches the Onscreen Display (OSD) menu, returns to
the previous step for the OSD menu operation or exits
the OSD menu.
17
83
3
5
610
9
4
2
5
English
Remote Control Layout
Remote Control Layout
Remote Control Layout
Remote Control LayoutRemote Control Layout
#
#
#
## Function
Function
Function
FunctionFunction Description
Description
Description
DescriptionDescription
1 POWER Refer to the "Turning the Projector On/Off" section.
2 SOURCE Changes the active source.
3 MENU Launches the Onscreen Display (OSD) menu or exits the
OSD menu.
4
Keystone
Adjusts image distortion caused by tilting projection.
Four
directional
selection
keys
Selects items or makes adjustments to your selection.
ENTER Confirms your selection of items.
Play/Pause
5 BACK Cancels your selection, or goes back to previous page.
Stop
6 FREEZE To pause the screen image.
7 VGA To change source to VGA. This connection supports
analog RGB, and YPbPr (480i/480p/576i/576p/720p/1080i/
1080p). (for the model with VGA connector)
6
English
8 PgUp/PgDn For computer mode only. Use this button to select the
next or previous page. This function is only available
when connected to a computer via a mini USB cable.
9 COMPONENT (No function)
10 MEDIA Opens MEDIA SETUP page. (for LAN/wireless
compatible models)
11 Infrared
transmitter
Sends signals to the projector.
12 MOUSE (No function)
13 VOL+ Increases the projector’s volume.
14 VOL- Decreases the projector’s volume.
15 HOME (No function) (for models without Android TV dongle)
Returns to the home screen of the Android TV dongle.
16 HIDE Press "HIDE" to hide screen image; press again to
display the image.
17 HDMI/MHL To change source to HDMI™ (or MHL). (for the model
with HDMI™ or MHL connector)
18 ZOOM IN/ZOOM
OUT
Zooms the projector display in or out.
19 VIDEO To change source to composite video.
.
.
. . (for the model
with VIDEO connector)
20 LAN/WiFi To change source to LAN/WiFi. (for LAN/wireless
compatible models)
21 Keypad 0~9 Press "0~9
0~9
0~9
0~90~9" to input a password in the "Setting" >
"Security" OSD.
#
#
#
## Function
Function
Function
FunctionFunction Description
Description
Description
DescriptionDescription
7
English
Getting Started
Getting Started
Getting Started
Getting StartedGetting Started
Connecting the Projector
Connecting the Projector
Connecting the Projector
Connecting the Projector Connecting the Projector
#
#
#
## #
#
#
##
Description
Description
Description
DescriptionDescription Description
Description
Description
DescriptionDescription
1 Power cord 6 HDMI cable
2 Audio cable 7 S/PDIF audio cable
3 RS232 cable 8 Android TV dongle
4 HDMI dongle 9 Wireless dongle
5 WirelessHD dongle
1
5
6
6
4
3
2
7
8
9
Video Output
Display
Speakers
Note: Connector interface is subject to model's specifications.
8
English
Note:
Note:
Note:
Note:Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note:
Note:
Note:
Note:Note: Compatible HDMI dongles: WirelessHD (MWIHD1), MWA3,
HWA1, ChromecastTM.
10
English
Turning Off the Projector
Turning Off the Projector
Turning Off the Projector
Turning Off the ProjectorTurning Off the Projector
1 To turn the projector off, press the power button. This message
appears:
"Please press power button again to
"Please press power button again to
"Please press power button again to
"Please press power button again to"Please press power button again to complete the shutdown process"
complete the shutdown process"
complete the shutdown process"
complete the shutdown process" complete the shutdown process"
Press the power button again.
2 The LED Power indicator will turn solid red to indicate standby mode.
3 It is now safe to unplug the power cord.
Warning indicators:
Warning indicators:
Warning indicators:
Warning indicators:Warning indicators:
"Projector Overheated. Li
"Projector Overheated. Li
"Projector Overheated. Li
"Projector Overheated. Li"Projector Overheated. Light source
ght source
ght source
ght source ght source will automatically turn off soon."
will automatically turn off soon."
will automatically turn off soon."
will automatically turn off soon."will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED Temp indicator will turn solid red. Contact
your local dealer or service center.
"Fan failed. Light sour
"Fan failed. Light sour
"Fan failed. Light sour
"Fan failed. Light sour"Fan failed. Light source will automatically
ce will automatically
ce will automatically
ce will automatically ce will automatically turn off soon."
turn off soon."
turn off soon."
turn off soon."turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED Temp indicator will blink. Contact your local dealer or
service center.
Note:
Note:
Note:
Note:Note: Whenever the projector automatically shuts down and the
LED Temp indicator turns solid red, contact your local reseller or
service center.
11
English
Adjusting the Projected Image
Adjusting the Projected Image
Adjusting the Projected Image
Adjusting the Projected ImageAdjusting the Projected Image
Adjusting the Height
Adjusting the Height
Adjusting the Height
Adjusting the Height Adjusting the Height of the Projected Image
of the Projected Image
of the Projected Image
of the Projected Imageof the Projected Image
The projector is equipped with elevator feet for adjusting the image height.
To raise the image:
1 Use the front Tilt adjusting wheel to raise the image to the desired
height and angle.
2 Use the rear Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1 Use the front Tilt adjusting wheel to lower the image to the desired
height and angle.
2 Use the rear Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
12
English
How to Get a Preferred Image Size by Adjusting
How to Get a Preferred Image Size by Adjusting
How to Get a Preferred Image Size by Adjusting
How to Get a Preferred Image Size by Adjusting How to Get a Preferred Image Size by Adjusting
Distance and Zoom
Distance and Zoom
Distance and Zoom
Distance and ZoomDistance and Zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
1080p/4K series with a zoom ratio of 1.3x and a throw ratio of 1.15 – 1.5
To obtain an image size of 100", set the projector at a distance between 2.5 m
and 3.3 m from the screen and adjust the zoom level accordingly.
Desired Image Size Distance (m) Top (cm)
Diagonal
(inch)
< A
A
A
AA >
W (cm) x H (cm) Max zoom
< B
B
B
BB >
Min zoom
< C
C
C
CC >
From base to top of image <
D
D
D
DD >
Offset: 110% Offset: 130%
30 66 x 37 0.8 1.0 39 43
40 89 x 50 1.0 1.3 52 57
50 111 x 62 1.3 1.7 65 72
60 133 x 75 1.5 2.0 78 86
70 155 x 87 1.8 2.3 92 100
80 177 x 100 2.0 2.7 105 115
90 199 x 112 2.3 3.0 118 129
100 2.5 131221 x 125 3.3 143
120 266 x 149 3.1 4.0 157 172
150 332 x 187 3.8 5.0 196 215
180 398 x 224 4.6 6.0 235 258
200 443 x 249 5.1 6.6 262 286
250 553 x 311 6.4 8.3 327 358
300 664 x 374 7.6 10.0 392 430
Desired dis
Desired dis
Desired dis
Desired disDesired distance
tance
tance
tancetance
Height:
Height:
Height:
Height:Height:
131~143
131~143
131~143
131~143 131~143
cm
cm
cm
cmcm
From base
From base
From base
From base From base
to top of
to top of
to top of
to top of to top of
image
image
image
imageimage
100"
100"
100"
100"100"
Desired
Desired
Desired
DesiredDesired
image s
image s
image s
image simage size
ize
ize
izeize
2.5 m
2.5 m
2.5 m
2.5 m2.5 m
3.3 m
3.3 m
3.3 m
3.3 m3.3 m
13
English
1080p series with a zoom ratio of 1.1x and a throw ratio of 1.49 – 1.64
To obtain an image size of 100", set the projector at a distance between 3.3 m
and 3.6 m from the screen and adjust the zoom level accordingly.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A
A
A
AA > W (cm) x H (cm) Max zoom
< B
B
B
BB >
Min zoom
< C
C
C
CC >
From base to top of
image < D
D
D
DD >
30 66 x 37 1.0 1.1 38
40 89 x 50 1.3 1.5 51
50 111 x 62 1.6 1.8 64
60 133 x 75 2.0 2.2 77
70 155 x 87 2.3 2.5 90
80 177 x 100 2.6 2.9 103
90 199 x 112 3.0 3.3 115
100 3.3 3.6 128221 x 125
120 266 x 149 4.0 4.4 154
150 332 x 187 4.9 5.4 192
180 398 x 224 5.9 6.5 231
200 443 x 249 6.6 7.3 257
250 553 x 311 8.2 9.1 321
300 664 x 374 9.9 10.9 385
Desired dis
Desired dis
Desired dis
Desired disDesired distance
tance
tance
tancetance
Height:
Height:
Height:
Height:Height:
128 cm
128 cm
128 cm
128 cm128 cm
From base
From base
From base
From base From base
to top of
to top of
to top of
to top of to top of
image
image
image
imageimage
100"
100"
100"
100"100"
Desired
Desired
Desired
DesiredDesired
image s
image s
image s
image simage size
ize
ize
izeize
3.3 m
3.3 m
3.3 m
3.3 m3.3 m
3.6 m
3.6 m
3.6 m
3.6 m3.6 m
14
English
How to Get a Preferred Im
How to Get a Preferred Im
How to Get a Preferred Im
How to Get a Preferred ImHow to Get a Preferred Image Position by Adjusting
age Position by Adjusting
age Position by Adjusting
age Position by Adjusting age Position by Adjusting
Lens Shift (only for selected models)
Lens Shift (only for selected models)
Lens Shift (only for selected models)
Lens Shift (only for selected models)Lens Shift (only for selected models)
The projector is equipped with lens shift for adjusting the position of projected
image without requiring you to physically move the projector. To shift the lens,
turn the knob on the top of the projector.
Note: The figures shown in this section are for reference only not
approximate value. The figures between units can be different
due to assembly tolerance.
The vertical height can be adjusted between +55% and +65% of the image
height.
The vertical position
H
0.10H
0.10H
0.10H
0.10H0.10H
0.05H
0.05H
0.05H
0.05H0.05H
15
English
User Controls
User Controls
User Controls
User ControlsUser Controls
Installation Menu
Installation Menu
Installation Menu
Installation MenuInstallation Menu
The Installation menu provides an Onscreen Display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal" is displayed on the screen or when the projector searches for input
signal.
1 Turn on the projector by pressing (POWER) on the control panel or
remote control.
2 Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration
and alignment settings, such as screen size and distance, focus and
more.
Note
Note
Note
NoteNote: The OSD screenshot is for reference only and may differ from the
actual design.
4 The Installation menu includes several options.
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
5 Press "MENU" anytime to exit the menu and return to the Acer
welcome screen.
16
English
Onscreen Display (OSD) Menus
Onscreen Display (OSD) Menus
Onscreen Display (OSD) Menus
Onscreen Display (OSD) MenusOnscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
Using the OSD menus
Using the OSD menus
Using the OSD menusUsing the OSD menus
To open the OSD menu, press "MENU" on the control panel or remote
control.
When the OSD is displayed, use to select an item in the main menu.
After selecting the desired main menu item, press to enter a submenu
for feature setting.
Use to select the desired item and adjust the settings by using
.
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Note
Note
Note
NoteNote: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
Main menu
Submenu
Setting
17
English
Color
Color
Color
ColorColor
BluelightShield
BluelightShield
BluelightShield
BluelightShieldBluelightShield
This function protects your eyes from over-exposure to
blue light. The options are Off, Low, Medium, and High.
Choose a preferred setting to reduce the level of blue light
and get a comfortable viewing experience.
When this function is enabled, LumiSense will be
automatically set to "Off".
Dynamic Bla
Dynamic Bla
Dynamic Bla
Dynamic BlaDynamic Black
ck
ck
ckck
The projector can intelligently optimizes the brightness
and color saturation of projected image. The feature
greatly enhances dark detail visibility and color saturation.
Off: For normal mode.
On: Automatically optimizes the display of dark movie
scenes enabling them to be shown in incredible detail.
This function is unavailable when 3D is set to "On" .
Display Mode
Display Mode
Display Mode
Display ModeDisplay Mode
There are many factory presets optimized for various types
of images.
Bright: For brightness optimization.
Presentation: For meeting presentation with higher
brightness.
Standard: For common environment.
Rec.709: For Rec. 709 standard.
Movie: For brighter and general movie/video/photo
playing.
Dark Cinema: For dark movie content.
Game: For game content.
Football: For football game.
DICOM SIM: For DICOM format files in simulation
mode, and not for actual diagnosis.
ISF Day/ISF Night: Only available when ISF is enabled.
User 1/User 2/User 3: Memorize user’s settings.
Color Profile
Color Profile
Color Profile
Color ProfileColor Profile
Available when User 1/User 2/User 3 is selected in the
Display Mode menu. You can use one of the display modes
as a starting point and customize the settings. The below
OSD items can be adjusted and saved.
18
English
Wall Color
Wall Color
Wall Color
Wall ColorWall Color
Use this function to choose a proper color according to the
wall. There are several choices, including White, Light
Yellow, Light Blue, Pink and Dark Green. It will compensate
for the color deviation due to the wall color to show the
correct image tone.
Brightness
Brightness
Brightness
BrightnessBrightness
Adjusts the brightness of the image.
Press to darken the image.
Press to lighten the image.
Contrast
Contrast
Contrast
ContrastContrast
Controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Press to decrease the contrast.
Press to increase the contrast.
Saturation
Saturation
Saturation
SaturationSaturation
Adjusts a video image from black and white to fully
saturated colors.
Press to decrease the amount of color in the
image.
Press to increase the amount of color in the
image.
Hue
Hue
Hue
HueHue
Adjusts the color balance of red and green.
Press to increase the amount of green in the
image.
Press to increase the amount of red in the image.
Color
Color
Color
Color Color
Temperature
Temperature
Temperature
TemperatureTemperature
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Gamma
Gamma
Gamma
GammaGamma Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
19
English
Advanced
Advanced
Advanced
AdvancedAdvanced
Ind. Color Management: Adjusts the red, green, blue,
cyan, yellow and magenta colors.
- Ind. Hue: Changes the hue of the color selected.
- Ind. Saturation: Adjusts a video image from black
and white to fully saturated color.
- Ind. Gain: Adjusts the contrast levels.
Brilliant Color: Produces an expanded on-screen color
spectrum that delivers enhanced color saturation for
bright, true-to-life images. This feature is "On" by
default.
White Peaking: Increases the brightness of whites that
are near 100%. (Video sources only)
Film Mode: Sets the image optimized to 24-frame True
Film mode for more realistic cadence of film playback
during motion sequences.
ISF: This menu is password protected and only
accessible by authorized calibrators. The ISF (Imaging
Science Foundation) has developed carefully crafted,
industry-recognized standards for optimal video
performance and has implemented a training
program for technicians and installers to use these
standards to obtain optimal picture quality ISF
certified display devices. Accordingly, we recommend
that setup and calibration be performed by an ISF
certified installation technician. For more information,
go to www.imagingscience.com or contact the dealer
or retailer from whom you purchased the projector.
Rename
Rename
Rename
RenameRename
Available when User 1/User 2/User 3 is selected in the
Display Mode menu. You can change User 1/User 2/User 3
to your preferred mode name in English letters.
20
English
Image
Image
Image
ImageImage
Projection
Projection
Projection
Projection Projection
Mode
Mode
Mode
ModeMode
Front: The factory default setting.
Rear: Reverses the image so you can project from
behind a translucent screen.
Projection
Projection
Projection
Projection Projection
Location
Location
Location
LocationLocation
Auto: Automatically adjusts projection location of
image.
Desktop
Ceiling: Turns the image upside down for ceiling-
mounted projection.
Aspect
Aspect
Aspect
AspectAspect
Ratio
Ratio
Ratio
RatioRatio
Use this function to choose your desired aspect ratio.
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
Full (for WXGA/1080p models): The image will be
displayed making full use of the horizontal and vertical
pixels.
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
L.Box (for WXGA/1080p models): Keeps the original
signal aspect ratio and zooms in by 1.333 times.
Auto Keystone
Auto Keystone
Auto Keystone
Auto KeystoneAuto Keystone Automatically adjusts image distortion caused by tilting
projection.
Manual
Manual
Manual
Manual Manual
Keystone
Keystone
Keystone
KeystoneKeystone
Manually adjusts image distortion caused by tilting
projection.
This function is unavailable when Auto Keystone is set
to "On".
21
English
H/V Keystone
H/V Keystone
H/V Keystone
H/V KeystoneH/V Keystone
Auto V. Keystone
Auto V. Keystone
Auto V. Keystone
Auto V. KeystoneAuto V. Keystone
Automatically adjusts vertical image distortion caused by
tilting projection.
V. Keystone
V. Keystone
V. Keystone
V. KeystoneV. Keystone
Manually adjusts image distortion caused by tilting
projection.
H. Keystone
H. Keystone
H. Keystone
H. KeystoneH. Keystone
Manually adjusts image distortion caused by tilting
projection.
4 Corner
4 Corner
4 Corner
4 Corner 4 Corner
Correction
Correction
Correction
CorrectionCorrection
Manually adjusts the shape and size of an image that is
unevenly rectangular on all sides. Press "MODE" repeatedly
to select the corner that you wish to adjust. Press four
directional selection keys to adjust the image shape.
Please adjust 4-corner correction separately for each
aspect ratio, and its memory is allowed to save 4 sets of
settings only.
22
English
Warpin
Warpin
Warpin
WarpinWarping
g
g
gg
Note
Note
Note
NoteNote: Some of the following OSD settings may not be
available. Please refer to the actual OSD of your
projector.
The function is to configure the geometric distortion of the
projector’s images when the images are projected onto
screens which have a kind of uneven surface such as a
cylinder, a spherical shape, etc.
Enable
Enable
Enable
EnableEnable
Keystone and corner correction functions will not be
available when Warping is enabled.
Control Method
Control Method
Control Method
Control MethodControl Method
Allows you to select a preferred control method for warping
adjustment.
Warping A
Warping A
Warping A
Warping AWarping Adj.
dj.
dj.
dj.dj.
This function is available when On
On
On
OnOn is selected in the Warping
Warping
Warping
WarpingWarping
> Enable
Enable
Enable
EnableEnable menu and OSD
OSD
OSD
OSDOSD is selected in the Warping
Warping
Warping
WarpingWarping > Control
Control
Control
Control Control
Method
Method
Method
MethodMethod menu.
Digital Zoom
Digital Zoom
Digital Zoom
Digital Zoom Digital Zoom
Out (Install)
Out (Install)
Out (Install)
Out (Install)Out (Install)
Sets the default size of the projected image. You can further
zooms in or out the image by pressing . Using the
functions of Digital Zoom Out and Image Shift together helps
you fit the projected image full screen without adjusting the
existing ceiling mount settings.
Image Shift
Image Shift
Image Shift
Image ShiftImage Shift
Shifts the projected image by pressing . When Native
Resolution is WXGA, this functions is only available when the
setting of Digital Zoom Out (Install) is less than 1.0.
Sharpness
Sharpness
Sharpness
SharpnessSharpness
Adjusts the sharpness of the image.
Press to decrease the sharpness.
Press to increase the sharpness.
HDMI Color
HDMI Color
HDMI Color
HDMI Color HDMI Color
Range
Range
Range
RangeRange
Adjusts the color range of the HDMI image data to prevent
color display error.
Auto: Automatically adjusts the color range by
information from the player.
Limited Range: Processes the input image as limited
color range data.
Full Range: Processes the input image as full color range
data.
24
English
USB 5V
USB 5V
USB 5V
USB 5V USB 5V
(Standby)
(Standby)
(Standby)
(Standby)(Standby)
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on or in
standby mode.
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
Low Input Lag
Low Input Lag
Low Input Lag
Low Input LagLow Input Lag
This function is especially suitable for gaming environment. It
reduces input to output latency and helps create a seamless
experience.
This function is only available for certain input timings.
After turned on, performing Auto Keystone or
adjusting the following settings will deactivate this
function: Aspect ratio, Keystone, H. Position, V.
Position, Frequency, HDMI Scan Info, Digital Zoom.
When Display Mode is Game Dark or Game Bright, this
function will be automatically turned on.
25
English
Security
Security
Security
SecuritySecurity
Security
Security
Security
SecuritySecurity
This projector provides a useful security function for the
administrator to manage the projector.
Press to change the "Security" setting. If the security
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
The factory default of "Administrator Password" is
"1234".
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
If "Off" is selected, you can switch on the projector
without password.
Timeout (Min.)
Timeout (Min.)
Timeout (Min.)
Timeout (Min.)Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
Press to select timeout duration.
The range is from 10 to 990 minutes.
When time is up, the projector will request you to enter
the password again.
The factory default setting of "Timeout (Min.)" is "Off".
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
26
English
Security
Security
Security
SecuritySecurity
User Password
User Password
User Password
User PasswordUser Password
Press to set up or change "User Password".
Use the numerical keys on the remote control to set the
password and press "ENTER" to confirm.
To delete the digits, Press .
Enter the password again when you see "Confirm
Password" displayed.
The password should be 4~8 digits in length.
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged. If you fail to enter
the correct password within 20 minutes upon request,
the projector will shut down automatically.
If you select "Always request password while projector
turns on", you are requested to input the password
every time the projector is turned on. If you fail to enter
the correct password within 20 minutes upon request,
the projector will shut down automatically.
Administrator Password
Administrator Password
Administrator Password
Administrator PasswordAdministrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
Press to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
service center.
Lock User Startup Screen
Lock User Startup Screen
Lock User Startup Screen
Lock User Startup ScreenLock User Startup Screen
This function is set to "OFF" by default. If set to "ON", the
startup screen is locked and cannot be changed by the
"Startup Screen" and "Screen Capture" functions.
Reset WIFI
Reset WIFI
Reset WIFI
Reset WIFIReset WIFI Press “ENTER” after choosing "Yes" to return the WIFI
default settings.
27
English
HDMI CEC
HDMI CEC
HDMI CEC
HDMI CECHDMI CEC
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector. When
"HDMI CEC" and "RC Pass Through" are activated, the four
directional selection keys and ENTER/BACK/HOME buttons
can be used to control the Android TV dongle.
This function is only available for the HDMI/MHL port.
Reset
Reset
Reset
ResetReset Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
28
English
Management
Management
Management
ManagementManagement
ECO Mode
ECO Mode
ECO Mode
ECO ModeECO Mode
Choose "ECO" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "User" allows you to adjust the light
source power. Choose "Off" to return to the normal mode.
Light Source
Light Source
Light Source
Light Source Light Source
Power
Power
Power
PowerPower
This function is only available when "Custom" is selected
in the ECO Mode menu. You can adjust the light source
power to extend the light source life and decreases the fan
noise.
High Altitude
High Altitude
High Altitude
High AltitudeHigh Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
Auto Shutdown
Auto Shutdown
Auto Shutdown
Auto ShutdownAuto Shutdown
(Minutes)
(Minutes)
(Minutes)
(Minutes)(Minutes)
The projector will automatically shut down while there is
no signal input detected after the time you set.
Menu Display
Menu Display
Menu Display
Menu Display Menu Display
Time (Seconds)
Time (Seconds)
Time (Seconds)
Time (Seconds)Time (Seconds)
5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"BACK".
Power Saving
Power Saving
Power Saving
Power SavingPower Saving
Extreme ECO (Minutes): Turns on to enter extreme
low light source mode while there is no signal input
detected after the time you set.
Quick Resume (Light Off): Turns on to enter light off
state to save power while there is no signal input
detected after the time you set.
Auto Shutdown (Minutes): The projector will
automatically shut down while there is no signal
input detected after the time you set.
Auto Power On
Auto Power On
Auto Power On
Auto Power OnAuto Power On
AC Power
AC Power
AC Power
AC PowerAC Power On
On
On
On On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
HDMI Power On
HDMI Power On
HDMI Power On
HDMI Power OnHDMI Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord and the HDMI signal is supplied via the HDMI
cable.
29
English
Control Panel
Control Panel
Control Panel
Control Panel Control Panel
Lock
Lock
Lock
LockLock
Off: Allows all keys on the control panel to operate
normally.
Child Lock: Disables the Power key on the control
panel when the projector is in standby mode to
prevent it from being accidentally turned on. To turn
the projector on, press and hold the Power key for 3
seconds.
Full Lock: Disables all keys on the control panel. If you
turn off the projector without disabling the Full Lock
function, the projector will still be in locked status the
next time it is turned on. To disable Full Lock function,
press and hold "POWER" on the control panel for 7
seconds and the Control Panel Lock will be set to
"Off". When the projector is in standby mode, press
and hold "POWER" on the control panel for 7 seconds
to turn the projector on and the Control Panel Lock
will be set to "Off".
Information
Information
Information
InformationInformation Displays current status of this projector.
32
English
It needs correct settings on graphics card 3D application program for correct
3D display.
Some timings may not be applicable for selected models.
Note:
Note:
Note:
Note:Note: "3D L/R Invert" and "3D Format" are only available when "3D" is
enabled.
Language
Language
Language
LanguageLanguage
Language
Language
Language
LanguageLanguage Sets a language for the OSD menus. Use to
select your preferred language.
33
English
Acer Splash Downloader
Acer Splash Downloader
Acer Splash Downloader
Acer Splash DownloaderAcer Splash Downloader
Introduction
Introduction
Introduction
IntroductionIntroduction
Acer Splash Downloader allows you to upload your desired picture onto an Acer
projector. You can select the picture as the startup screen via the projector’s
OSD menu.
System Requirements
System Requirements
System Requirements
System RequirementsSystem Requirements
Using the Acer Splash Downloader
Using the Acer Splash Downloader
Using the Acer Splash Downloader
Using the Acer Splash DownloaderUsing the Acer Splash Downloader
1. Entering download mode
1. Entering download mode
1. Entering download mode
1. Entering download mode1. Entering download mode
Long press the POWER and MENU buttons on the control panel simultaneously
while plugging in the power cord until the LED indicator lights up red.
Maximum image size 6 Mbytes
Maximum image resolution 1920 x 1200
Recommended: Native resolution
Minimum image resolution 800 x 600
Maximum color bits 24 bits
Image format BMP, JPG, PNG
Supported operation
system
Windows 7, 8, 8.1, 10 (32 / 64 Bit)


Produkt Specifikationer

Mærke: Acer
Kategori: Beamer
Model: HL-4K50

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer HL-4K50 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Beamer Acer Manualer

Acer

Acer DX427 Manual

30 Januar 2025
Acer

Acer HL-4K50 Manual

30 Januar 2025
Acer

Acer LR560ATV Manual

30 Januar 2025
Acer

Acer PD2528ic Manual

30 Januar 2025
Acer

Acer Vero PD2328 Manual

30 Januar 2025
Acer

Acer P1165P Manual

13 Januar 2025
Acer

Acer AX600 Manual

10 Januar 2025
Acer

Acer Q59X Manual

10 Januar 2025
Acer

Acer Q59S Manual

9 Januar 2025

Beamer Manualer

Nyeste Beamer Manualer