Acer KG221QA Manual

Acer Skærm KG221QA

Læs nedenfor 📖 manual på dansk for Acer KG221QA (4 sider) i kategorien Skærm. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the VGA (optional) and/or HDMI
(optional) input socket of the monitor, and the VGA (optional) and/or
HDMI (optional) output socket of the graphics card on the computer.
Then tighten the thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
2
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync (HDMI only):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
External controls
1&2 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving
mode.
3 Function key
/
a. Press to view Main page.Press again to enter next function in the Function Menu.
b. When the Function Menu is active, press this key selected or move to the next function.
4 Function key
Input
/ /
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, press this button selected or move to the previous
function.


Produkt Specifikationer

Mærke: Acer
Kategori: Skærm
Model: KG221QA

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer KG221QA stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skærm Acer Manualer

Skærm Manualer

Nyeste Skærm Manualer

Dell

Dell Alienware AW2524HF Manual

22 September 2024
Dell

Dell Alienware AW3423DW Manual

22 September 2024
Dell

Dell Alienware AW3225QF Manual

22 September 2024
Dell

Dell Alienware AW2725DF Manual

22 September 2024
Dell

Dell P2725H WOST Manual

22 September 2024
Titan Army

Titan Army P32A2S2 Manual

22 September 2024
Dell

Dell Alienware AW2723DF Manual

22 September 2024
Dell

Dell P2425H WOST Manual

22 September 2024
Viewsonic

Viewsonic VG3208-4K Manual

22 September 2024
Viewsonic

Viewsonic VG2208A-HD Manual

22 September 2024