Acer KW272U Manual

Acer Skærm KW272U

Læs nedenfor 📖 manual på dansk for Acer KW272U (3 sider) i kategorien Skærm. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the DP (optional) and/or HDMI (optional)

input socket of the monitor, and the DP(optional) and/or HDMI

(optional) output socket of the graphics card on the computer.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD

monitor and the line-out port on the computer with the audio cable.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

AMD FreeSync (HDMI/DP):

It can allow a AMD FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content

frame rates for power efcient, virtually stutter free and low-latency display update.

External controls

1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode.

2 Function key

a. Press to view Main page. Press again to enter hotkey1 function.

b. When the Function Menu is active, press this key to view the basic information for your

monitor and current input or reset the custom color settings to the factory defaults.

Produkt Specifikationer

Mærke:	Acer
Kategori:	Skærm
Model:	KW272U

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer KW272U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skærm Acer Manualer

8 Juli 2024

8 Juli 2024

28 Maj 2024

27 Maj 2024

21 Maj 2024

18 Maj 2024

Acer Nitro XZ325QU Manual

16 Maj 2024

Acer KG252QX Manual

11 Maj 2024

Acer EI242QRS3 Manual

8 Maj 2024

Acer EK240Y Manual

6 Maj 2024

Skærm Manualer

Nyeste Skærm Manualer

AOpen d-TILE DT22M-O Manual

20 November 2024

SWIT M-1093H Manual

20 November 2024

BookIT 07A Manual

19 November 2024

Eizo FDS1702N Manual

18 November 2024

Samsung SyncMaster T220P Manual

18 November 2024

Dynaudio BM6A Manual

17 November 2024

Iiyama G-Master GB3466WQSU Manual

17 November 2024

Iiyama G-Master G2730HSU Manual

17 November 2024

Iiyama ProLite T2336MSC Manual

17 November 2024

Hannspree HO 220 PTA Manual

17 November 2024