ACTi E13A Manual


Læs nedenfor 📖 manual på dansk for ACTi E13A (123 sider) i kategorien IP kameraer. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/123
Firmware User Manual s
A1D-500- - V6 9..0 45 AC
201 305/10/
www.acti.com
Firmware Users Manual V6.09. 45
5
Recommended PC Specifications
In order to configure or test cameras, a PC with following basic specifications is needed: the
CPU
Core 2 Duo 2.13 GHz above or
Memory
2 GB or above
Operating System
Windows XP with SP2 or above.
Windows 2003
Windows Vista
Windows 2008
Windows 7
Windows 8
Browser for Accessing
Firmware
Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed (partial functionality)
Other Browsers with Basic VLC Media Player
(partial functionality)
Video Resolution
1024x768 or higher
www.acti.com
Firmware Users Manual V6.09. 45
8
Use the default IP address a camera: of
If there is no DHCP server in the given network, the user may have to assign the IP addresses to
both PC and camera manually to make sure they are in the same network segment.
When the camera is plugged into network and it does not detect any DHCP services, it will
automatically assign itself a default IP:
192.168.0.100
Whereas the default port number would . In order to access that camera, the IP address of be 80
the PC has to be configured to match the network segment of the camera.
Manually adjust the IP address of the PC:
In the following example, based on Windows 7, we will configure the IP address to 192.168.0.99
and set Subnet Mask to by using the steps below: 255.255.255.0
1
2
4


Produkt Specifikationer

Mærke: ACTi
Kategori: IP kameraer
Model: E13A

Har du brug for hjælp?

Hvis du har brug for hjælp til ACTi E13A stil et spørgsmål nedenfor, og andre brugere vil svare dig