Adam Hall 87404A Manual


Læs nedenfor 📖 manual på dansk for Adam Hall 87404A (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | .com adamhall
8740x A
RACK DRAWER ALUMINUM 2 U / 3 U / 4 U
SAFET Y INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the
equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations).
Make certain that wall mounts are properly installed and secured. Make certain that the
equipment is installed securely and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sourc -
es of heat. Make certain that the equipment is always installed so that is cooled sufficiently
and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special out -
door equipment - in this case, observe the special instructions noted below. Do not expose
this equipment to flammable materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place con -
tainers filled with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufac -
turer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g.,
due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause prop -
erty damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the
equipment or if it has been damaged in another way, switch it off immediately and unplug
it from the mains outlet (if it is a powered device). This equipment may only be repaired by
authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please
separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam -
hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this ap -
pliance may not be treated as household waste. This is to avoid environmental damage or person-
al injury due to uncontrolled waste disposal. Please dispose of this product separately from other
waste and have it recycled to promote sustainable economic activity.
Product number 87402A 87403A 87404A
Product type 19" Rack Drawers
Material Aluminum
Surface Powder coated
Color Black
Outside height 2 U 3 U 4 U
Outside width (mm) 434 434 434
Outside depth (mm) 392 392 392
Inside height (mm) 74 120 175
Inside width (mm) 401 401 401
Internal depth (mm) 373 373 373
Max. load capacity 25 kg
Material thickness (mm) 2
Weight 3.45 kg 4.1 kg3 kg
DESCRIPTION
• Full extension
• Drawer on ball-bearing chassis rail
• Incl. lock and 2 keys
• Removable by quick release of the chassis rails
SPECIFICATIONS


Produkt Specifikationer

Mærke: Adam Hall
Kategori: Ikke kategoriseret
Model: 87404A

Har du brug for hjælp?

Hvis du har brug for hjælp til Adam Hall 87404A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Adam Hall Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024