Adastra C25V Manual


Læs nedenfor 📖 manual på dansk for Adastra C25V (1 sider) i kategorien Højttaler. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
C25V
Compact Background Speakers
Item ref: 952.820UK, 952.821UK
User Manual
Introduction
Thank you for choosing the C25V series indoor speakers. These speakers have been designed to offer high quality sound for 100V line
or low impedance installations. Please read and follow the instructions in this manual to achieve the best results and avoid damage
through misuse.
Caution
C25V speakers are intended for indoor use. Avoid moist or dusty environments. Avoid excess heat and exposure to direct sunlight.
For 100V installation, take proper care to insulate any contacts within reach of users.
Installation
Each C25V speaker is supplied with an adjustable wall-mounting bracket which slots into the rear of the enclosure. When fixing to a
wall or ceiling, use the bracket to mark out the fixing points and use appropriate fixings for the substrate that the speaker will be
attached to, ensuring that the fixing is strong enough to bear the weight load.
Connection
C25V speakers are connected via 2 sets of spring terminals at the rear of the enclosure. For 100V operation, use double
insulated cable connected to the lower terminals marked “6W”. This will draw a maximum 6Wrms from the 100V
amplifier. With the amplifier switched off, strip the speaker wire ends and connect 100V or “+” wire to the red terminal
and connect Common or “ ” to the black terminal. Ensure that the sum of the wattages of all the speakers attached to -
the amplifier does not exceed the recommended output of the amplifier.
When used with a standard (non-100V) amplifier, connect to the “8” terminals and refer to the amplifier manufacturer’s manual to
ensure that total speaker impedance (Ω) is not less than recommended for the amplifier. Refer to the amplifier manual and
specifications below to ensure that it delivers no more than the rated power (25Wrms) to the C25V.
Specifications
Stock ref.
952.820UK
952.821UK
Colour
White
Black
Driver
65mmØ (2.5“) reinforced paper cone
Frequency response (-10dB)
150Hz - 22kHz
Impedance
8 Ohms
Power max. : 8 Ohms
30W
Power rms : 8 Ohms
15W
Power rms: 100V line
6W
Sensitivity (1m, 1W)
88dB
Dimensions (each)
89 x 111 x 90mm
Weight (each)
465g
Disposal: that the product is classed as Electrical or The Crossed Wheelie Bin” symbol on the product means
Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2021.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.


Produkt Specifikationer

Mærke: Adastra
Kategori: Højttaler
Model: C25V

Har du brug for hjælp?

Hvis du har brug for hjælp til Adastra C25V stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Adastra Manualer

Adastra

Adastra WA-215 Manual

16 August 2024
Adastra

Adastra F40V Manual

15 August 2024
Adastra

Adastra SC32V Manual

15 August 2024
Adastra

Adastra 952.613UK Manual

15 August 2024
Adastra

Adastra 952.615UK Manual

14 August 2024
Adastra

Adastra 952.612UK Manual

13 August 2024
Adastra

Adastra FSV-B Manual

13 August 2024
Adastra

Adastra AH25 Manual

13 August 2024
Adastra

Adastra 952.618UK Manual

13 August 2024
Adastra

Adastra 952.614UK Manual

13 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer