Adj Hydro Flex L19 Manual

Adj Ikke kategoriseret Hydro Flex L19

Læs nedenfor 📖 manual på dansk for Adj Hydro Flex L19 (48 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/48
HYDRO FLEX L19
User Manual
2
©2025 ADJ Products, LLC all rights reserved. Information, specications, diagrams, images, and
instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product
names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by statutory or judicial
law or hereinafter granted. Product names used in this document may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC
brands and product names are trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all afliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as a
result of the improper, unsafe, insufcient and negligent assembly, installation, rigging, and operation
of this product.
ADJ PRODUCTS LLC World Headquarters
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
Tel: 800-322-6337 | www.adj.com |support@adj.com
ADJ Supply Europe B.V.
Junostraat 2 | 6468 EW Kerkrade | Netherlands
Tel: +31 45 546 85 00 | Fax: +31 45 546 85 99 | www.adj.eu support@adj.eu |
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products
when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment
from power when not in use. Thank you!
D O C U M E N T V E R S I O N
Due to additional product features and/or enhancements, an updated version of this
document may be available online.
Please check www.adj.com for the latest revision/update of this manual before
beginning installation and/or programming.
Date Document
Version
Software
Version DMX Channels Notes
01/20/2025 1.0 1.0.1
22 / 31 Std / 40 / 104 /
31 Std RGBW / 31 Std
CMY / 34
Initial Release
3
General Information 4
Limited Warranty (USA Only) 5
Warranty Registration | Features 6
IP65 Rated 7
Safety Guidelines 8
Overview 9
Installation Guidelines 10
Remote Device Management (RDM) 14
Control Panel 15
System Menu 16
Fan Modes 20
DMX Setup 21
DMX Traits 23
Pixel Map 35
Color Wheels Table 36
Color Macros Chart 37
Dimmer Modes and Curves 39
Color Temperature 40
Cleaning and Maintenance 41
Torque Settings for Screws 42
IP Test Parameters 43
Error Codes 44
Specifications 45
Dimensional Drawings 46
FCC Statement 47
C O N T E N T S
4
G E N E R A L I N F O R M AT I O N
INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before attempting
to operate this device. These instructions contain important safety and use information.
This product is intended for use by professionally trained personnel only, and is not suitable for
private use.
FOR SOFTWARE UPDATES, CONTACT ADJ CUSTOMER SUPPORT.
Unpacking
Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton is damaged,
carefully inspect the device for damage, and be sure all accessories necessary to install and operate
the device have arrived intact. In the event damage has been found or parts are missing, please contact
our customer support team for further instructions. Please do not return this device to your dealer
without rst contacting customer support. Please do not discard the shipping carton in the trash. Please
recycle whenever possible.
FOR SOFTWARE SUPPORT, CONTACT ADJ CUSTOMER SUPPORT.
CUSTOMER SUPPORT
Contact ADJ Service for any product related service and support needs.
Also visit with questions, comments or suggestions.
forums.adj.com
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-2650 | support@adj.com
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 60 | Fax: +31 45 546 85 96 | support@adj.eu
REPLACEMENT PARTS please visit parts.adj.com
I M P O R TA N T N O T I C E !
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY
REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES
RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY
INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY
AND ARE NOT SUBJECT TO WARRANTY CLAIMS AND/OR REPAIRS.
5
L I M I T E D WA R R A N T Y ( U S A O N LY )
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing
defects in material and workmanship for a prescribed period from the date of purchase (see specic warranty period
on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including
possessions and territories. It is the owners responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending back the product-please
contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC
factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are
within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within
the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be
shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability
whatsoever for loss of or damage to any such accessories, or for the safe return thereof.
C. This warranty is void of the serial number has been altered or removed; if the product is modied in any manner which
ADJ Products, LLC concludes, after inspection, affects the reliability of the product, if the product has been repaired or
service by anyone other than ADJ Products, LLC factory unless prior written authorization was issued to purchaser by
ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contact, and this warranty does not include maintenance, cleaning or periodic check up. During
the period specied above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts,
and will absorb all expenses for warrant service and repair labor by reason of defects in material or workmanship. The
sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement
thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were
manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any
obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products
described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC
in connection with this product, including warranties of merchantability or tness, are limited in duration to the warranty
period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or
tness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be
such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be
liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties
and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS
Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc.
excluding LED and lamps)
Laser Products = 1 Year (365 Days) Limited Warranty (excludes laser diodes which have 6 month limited warranty)
L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day limited warranty)
Note: 2 Year Warranty only applies to purchases within the United States.
StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty)
ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty
12
I N S TA L L AT I O N G U I D E L I N E S
RIGGING
Overhead rigging requires extensive experience, including among others, calculating working load
limits, installation material being used, and periodic safety inspection of all installation material and the
xture. If you lack these qualications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
This xture is designed to be mounted vertically (hanging or upright), or horizontally (perpendicular to
vertical axis) only.
FALLING FIXTURES CAN CAUSE SEVERE INJURY OR SERIOUS EQUIPMENT
DAMAGE! FOR THIS REASON, FIXTURES SHOULD BE INSTALLED AND INSPECTED
ONLY BY QUALIFIED PERSONNEL. DO NOT INSTALL THE UNIT IF YOU LACK THE
QUALIFICATIONS TO DO SO, OR IF YOU HAVE DOUBTS ABOUT THE SAFETY AND
SECURITY OF THE INSTALLATION SETUP OR LOCATION!
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT FALL IF THE
CLAMP FAILS.


Produkt Specifikationer

Mærke: Adj
Kategori: Ikke kategoriseret
Model: Hydro Flex L19

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj Hydro Flex L19 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Adj Manualer

Adj

Adj Hydro Flex L7 Manual

28 Januar 2025
Adj

Adj Jelly Globe Manual

28 Januar 2025
Adj

Adj Hydro Flex L19 Manual

28 Januar 2025
Adj

Adj DMX FX512 Manual

28 Januar 2025
Adj

Adj LTS-10B Manual

27 Januar 2025
Adj

Adj UV Par 100IP Manual

3 Januar 2025
Adj

Adj COB Cannon LP200X Manual

28 December 2024
Adj

Adj EVS3 FLEX45 Manual

28 December 2024
Adj

Adj Mirage Par H IP Manual

2 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer