Alcatel E192 Manual

Alcatel Telefon E192

Læs nedenfor 📖 manual på dansk for Alcatel E192 (2 sider) i kategorien Telefon. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

USER'S GUIDE

GUÍA DE USUARIO

ENGLISH

Before 1st use

Connecting your phone:

- Connect plugs in corresponding sockets in the base station.

Plug the telephone line into telephone socket and insert power

plug in an electrical outlet.

- Insert batteries in handset.

Before you start to use your telephone, charge the AAA batteries

continuously for 15 hours.

Only use plug adapter supplied with the unit and

rechargeable batteries with your phone.

What the icons means?

Phone Function Keys

1 OK key

2 Back / Clear key

3 Navigation key

4 Talk key - (Handsfree E192 only)

5 Hang-up / Exit key

6 - Access to operator service*Recall (Flash) key

7 Menu key

8 Redial Key

9 Start key

10 - To lock or unlock / to toggle between the external and Hash key

internal calls when both are set up.

11 Mute key

12 Call transfer/Intercom key

Fast blink indicates battery low. .

Indicates that an external call is connected or held.

Icon blinks when receiving an incoming call.

Indicates you have a new voice mail message*.

Indicates you have new missed calls*, or the call log is being

viewed.

Displays when the phonebook is accessed.

Displays when the alarm clock is activated.

Displays when handsfree is activated (E192 only).

Displays when ringer volume is turned off.

Indicates that the handset is registered and within range of the

base station.

Icon blinks when the handset is out of range or is searching for a

base.

Displays menu mode to confirm your selection.

Indicates that more options are available.

Use the UP / DOWN keys to scroll up / down.

Displays menu mode.

Select BACK to return to the previous menu level.

Your Telephone Operations

Switching on / off

- Press and hold the key.

Notes: When the handset is OFF, it cannot be used for making calls

including emergency calls. There will be no ringing during an

incoming call.

To answer a call, you will need to switch it back on. It may take

some time for the handset to re-establish a radio link with the base

unit.

To lock / unlock the keypad

- Press and hold the key.　

Note: Incoming calls can still be answered even if the keypad was

locked.

SAFETY

This telephone is not designed for Emergency calls when the main

power fails.

Do not use your telephone to notify a gas leak or other potential

explosion hazard!

Do not open your device or its power supply to avoid risk of

electrical shock. Do not attempt to open the batteries, as they

contain hazardous chemical substances.

Your telephone must be located in a dry place away from hot,

humide and direct sunlight condition. To avoid radio signal

interference, place the phone at least 1 meter away from other

electrical appliances or other phones.

ENVIRONMENT

This symbol means that your inoperative electronic

appliance must be collected separately and not mixed

with the household waste.

Help us protect the environment in which we live!

Paging

- Press located at the back of the base station. All the registered

handsets start to ring.

- Once retrieved, press any key on the handset or the again to

end the paging.

Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit

a beep tone to inform you that there is a second incoming call.

The number or name of the second caller will also be displayed on

your phone if you have subscribed to Caller Line Identification

service (CLI). Please contact your network provider for more

information on this service.

Phonebook settings: 50 entries

Store a contact in the phonebook

- / or to select / / to enter PHONEBOOK NEW

ENTRY / enter the name of contact / / enter the number of

contact / / confirmation beep ( to delete characters).

Access phonebook

- or to select / / or to select PHONEBOOK LIST

/ .

Note: Instead of pressing or to browse the phonebook

entries, you can press the numeric key corresponding to the first

letter of the entry you wish to locate.

Modify a phonebook entry

- / or to select / / or to select PHONEBOOK EDIT

ENTRY / / or to select an entry to edit / / current name

is displayed / edit the name / / edit the number / / confirmation

beep.

Delete a phonebook entry

- / or to select / / or to select PHONEBOOK

DELETE / / or to select entry to delete / / /

confirmation beep.

Change the display language

- / or to select / / or to select AJUSTES PERS

IDIOMA / / or to your desired language / /

beep.

confirmation

Note: Once the display language is set, the option menus on the

handset will switch to display in the selected language immediately.

Add / edit direct access memory

- / or to select / / or to select PHONEBOOK

DIRECT MEM. KEY 1 KEY 2 / / or to select or / / stored

name displayed, or displayed if it is empty / to NO NUMBER

Using the call log: stored up to 10 external calls

Access call log

- / or / .

Save call list entry into the phonebook

- / or to select an entry / / or to select SAVE

NUMBER / to select and enter the name of contact (maximum

12 characters) / .

Delete a Call Log entry

- / or / / or to select / / / DELETE

confirmation beep.

Delete all entries in the Call Log

- / / or to select DELETE ALL / / / confirmation

beep.

Save a redial number into the phonebook

- 　 / or to select an entry / to display SAVE NUMBER

/ to display / enter the name of contact ENTER NAME

(maximum 12 characters) / / return the display to redial list.

Delete direct access memory

- / or to select / / or to select PHONEBOOK

DIRECT MEM. KEY 1 KEY 2 / / or to select or / / stored

name displayed (or if it is empty) / to enter directNO NUMBER

memory menu / or to select / / / confirmation DELETE

beep.

Using the redial list

The redial list stores the last 5 numbers dialed.

Access redial list

- / or to browse the redial list / to view details.

Troubleshooting

If you have difficulty with your phone, please try the suggestions

listed below.

As a general rule, if a problem occurs, remove the batteries

from all the handsets in your installation for about 1 minute,

then disconnect and reconnect the power supply to the base

and reinstall the handset batteries.

Always check first

that:

Everyday use

“I cannot make or

answer calls”

You have followed all the steps listed in the user

manual to install and set up your telephone.

All connectors are firmly inserted in their sockets.

Mains power to the base unit is switched on at the

socket.

The handset’s batteries are correctly and securely

installed and are not run down.

If the handset’s display is blank, it may have been

switched off. Press and hold the HANG-UP/EXIT

key to switch it back on.

Check that the base unit’s mains power adapter is

plugged in and power is switched on.

The base unit needs mains power for normal

operation of the phone - not just for charging the

batteries.

Make sure you are using the telephone line cable

supplied with your telephone.

Other telephone line cables might not work.

Move the handset closer to the base unit.

Check the battery level symbol on the display. If it is

low, replace the handset on the base unit or charger

pod to recharge the batteries.

Switch off power at the mains socket, wait for a

short time and then switch back on. This may solve

the problem.

Batteries

“The handset’s

battery cells are

running low within

an hour or two”

“I try to recharge the

batteries but I still

get a warning that

they are low”

If the fault persists...

Before you first use the handset, you should have

left it on the base unit or charger pod for 15 hours

to charge the batteries fully. You may need to

replace the batteries. Check the connection

between the base unit and the mains power socket

unit.

You need to replace the batteries.

Dispose of used batteries safely – never burn them,

or put them where they could get punctured. Do not

use non - rechargeable batteries in your handset –

they may explode, causing damage.

Disconnect all other instruments connected to the

same line and try to make a call.

Disconnect the base unit from the telephone line

and plug a different phone into the master

telephone socket.

Try making a call. If this works, the line is OK.

If the call does not work, and you are using a two-

way socket adapter, remove it and plug a telephone

directly into the socket.

If the call now works, the adapter may be faulty.

If you cannot make a call, the fault may be on the

exchange line.

Contact the service provider.

“When I press on

the keys, nothing

happens”

“When I key in a

number, it appears

on the display, but I

cannot make an

outside call”

“The phone does

not ring”

“I hear ‘beeps’ from

my handset while

I’m on a call”

“When I try to make

a call, I hear busy

tone”

“The volume in the

earpiece is low

when I’m on a call”

Make sure the batteries are fitted in your handset .

If the Battery Level symbol on the display shows

‘low’, put your handset back on the cradle to charge.

Try a different position for the base unit –

somewhere higher if possible, or further from other

electrical equipment.

Try moving the handset closer to the base unit.

Check that the base unit’s mains power adapter is

plugged in and power is switched on.

Check that ring volume is not on OFF.

You may be going out of range of the base unit.

Move closer or your call may be cut off.

Check the Battery Level symbol on the display.

If it’s low, recharge the batteries.

If you’re using a multi-handset system, check

whether another handset is already on a call.

Make sure you’re holding the earpiece correctly

over your ear.

Adjust the volume using the UP/DOWN key.

“I cannot make a

call”

If the handset display shows KEYS LOCKED, press

and hold the * button to unlock it before you make

a call.

Only one handset (or the base unit) can be

connected to the outside line at a time.

If another handset is already using the line, you

need to wait until it has finished its call.

- On the base station, press and hold the key for 5 seconds

- On the handset, press / or to select ADVANCE SET

/ / or to select REGISTRATION / / enter Master PIN

when prompted / / WAITING displayed / confirmation beep.

Unregister your handset

- / or to select ADVANCE SET / / or to select

UNREGISTER / / enter Master PIN when prompted / /

or to select the handset number to unregister / /

confirmation beep.

Change recall time

- / or to select ADVANCE SET / / or to select

RECALL TIME SHORT MEDIUM / / or to select , or

LONG / / confirmation beep.

Change the dial mode (dual mode dialing version only)

You should normally leave the dialling mode at its default setting of

TONE (also called MF or DTMF).

However, you can change to PULSE if necessary.

Note: If PULSE dialling is set, you can press to switch to ONE T

dialling for the rest of that call.

- / or to select ADVANCED SET / / or to select

DIAL MODE TONE PULSE / / or to select or / /

confirmation beep.

Reset unit

- / or to select ADVANCE SET / / or to select

RESET / / / confirmation beep.

www.alcatel-home.com

ATLINKS Europe, 147 avenue Paul Doumer 92500 RUEIL-MALMAISON – France

The manufacturer reserves the right to modify the specifications of

its products in order to make technical improvements or comply

with new regulations.

ALCATEL and ATLINKS are registered trademarks.

The Alcatel logo and Alcatel name are trademarks of

Alcatel-Lucent and used under license by ATLINKS.

E132 / E132 Duo / Trio

E192 / E192 Duo / Trio

A/W No. : 10001557 Rev.0 (LA-EN)

Made in China

Delete all entries from the phonebook list

- / or to select / / or to select PHONEBOOK

DELETE ALL / / / confirmation beep.

Set date format

- / or to select / / or to select CLOCK&ALARM

SET FORMAT DATE FORMAT / / or to select / /

current setting display / or to select or / / DD/MM MM/DD

confirmation beep.

Set alarm

- / or to select / / or to select CLOCK&ALARM

ALARM OFF ON ONCE ON DAILY / / or to select , or / .

- if select or ON ONCE ON DAILY HH-MM, enter time ( ) for alarm

/ or to select or if in 12 HOURS format / / AM PM

confirmation beep.

Set alarm tone

- / or to select / / or to select CLOCK&ALARM

ALARM TONE MELODY 1 MELODY 2 / / or to select , or

MELODY 3 / / confirmation beep.

IMPORTANT: Handset registration is only necessary when you buy

extra handsets or if a handset has become faulty.

Up to 4 handsets can be registered to one base station.

The Master PIN is required before you can register or unregister

handsets.

By default, the Master PIN is 0000.

Advanced use of your telephone

Change Master PIN

The Master PIN is used for registration / unregistration of handsets.

The default Master PIN number is 0000.

Note: If you forget your PIN code, you can reset it to its default 0000

using a handset Reset.

- / or to select ADVANCED SET / / or to select

CHANGE PIN / / enter current master pin when prompted / /

enter new / / confirmation beep.PIN

Handset Tone

Set the ring volume

There are 5 ringer volume options (OFF, LEVEL 1, LEVEL 2,

LEVEL 3, LEVEL 4 and LEVEL 5). The default level is LEVEL 3.

- / or to select / / or to select PERSONAL SET

HANDSET TONE RING VOLUME / to select / / or to

the desired volume level / / confirmation beep.

Set the ring melody: 10 ring melodies

- / or to select / / or to select PERSONAL SET

HANDSET TONE RING TONES / / or to select / /

or to the desired melody / / confirmation beep.

Using the intercom (Duo / Trio versions)

Intercom another handset

- If only 2 registered handsets: .

- If more than 2 registered handsets: the available handset number

and * displayed / enter the handset number.

- To ring all handsets to intercom: .

Transfer an external call to another handset

During the call:

- If only 2 registered handsets: .

- If more than 2 registered handsets: the available handset number

and * displayed / enter the handset number.

- To ring all handsets to intercom: .

- onon the called handset to answer the internal call / the

first handset transfer the external call to the called handset /

external call tansferred.

Note: If there is no answer from the called handset, press key

to resume the external call.

Answer an external call during intercom

- / answer the external call and end the intercom.

Note: To put the internal call on hold and answer the incoming

external call, press key.

Switch between an internal and external call

- During the call, press and hold .

Establish a three-party conference call

- During call, / enter handset number / on the called handset

to answer / long press on the first handset.

CONFERENCE will be displayed on the screen once the

conference call is established.

The store where you bought your telephone can also provide you

with information and after - sales support.

Use handsfree (only for E192)

- To activate / desactivate handsfree : .

Adjust the earpiece volume

During a call, press or to select from VOLUME 1 to VOLUME 5.

Mute / unmute microphone

- to turn on / off the microphone.

Set time and date

Note: If you subscribe to the Caller Display service, the time and

date will be set automatically when you receive a call, but you may

still need to set the correct year.

- / or to select / / to select CLOCK & ALARM

DATE / TIME to display the last stored date / enter the current

(YY - MM - DD) / / enter the time (HH-MM) / .

Change your handset’s name

- / or to select / / or to select PERSONAL SET

HANDSET NAME / to display the current handset name /

to delete the characters / enter the new name (maximum 10

characters) / / confirmation beep.

Make and answer calls

Make a call

- either before or after dialing your number.

- From redial list : / or / .

- From call log list*: / or / .

Note: You need to subscribe to Caller Line Identification service to

be able to see the caller’s number or name in the call log.

- From phonebook: / or / .

- From direct memories : long press on KEY 1 or KEY 2 in idle mode.

Answer and end a call

- / .

IMPORTANT NOTE: You can simply place the handset back on its

base station or charger pod to end the call.

Activate / deactivate key tone

- / or to select / / or to select PERSONAL SET

HANDSET TONE KEY BEEP / / or to select / / or

to select or / / confirmation beep.ON OFF

enter direct memory menu / or to select / /EDIT NUMBER

currently stored name displayed (or if there is no ENTER NAME

number stored) / edit or enter the name / / confirmation beep.

Set date / time format

Set time format

- / or to select / / or to select CLOCK&ALARM

SET FORMAT TIME FORMAT / / to enter / current setting

displayed / or to select or / / 12 HOURS 24 HOURS

confirmation beep.

PLEASE READ THIS USER'S GUIDE BEFORE USING YOUR PHONE

FAVOR DE LEER TODO EL MANUAL ANTES DE UTILIZAR SU TELÉFONO

* Subject to subscription and availability of the service from the fixed line

operator.

E132 / E132 Duo / TRiO

E192 / E192 Duo / TRiO

A Displays Icons

B Displays in menu mode to confirm

your selection.

C Indicates that more options are available.

Use the UP / DOWN keys to scroll up/down.

D Displays in menu mode.

Select BACK to return to the previous menu

level. Select BACK to delete the last digit/

character entered.

Call screening

Call screening allows you to hear the caller while p1-he is leaving

a message.

You can then decide if you want to talk to the caller directly.

HANDSET LOCATOR button

Press to page handsets.

Press and hold to start registration

procedure.

Activate / deactivate auto hang-up

- / or to select / / or to select PERSONAL SET

AUTO HANG-UP ON OFF / / or to select or / /

confiramtion beep.

Produkt Specifikationer

Mærke:	Alcatel
Kategori:	Telefon
Model:	E192
Type:	DECT telefon
Produktfarve:	Blue, White
Batterikapacitet:	300 mAh
Indbygget skærm:	Ja
Batteriteknologi:	Nikkel-Metalhydrid (NiMH)
Volumenkontrol:	Digital
Indikator for batteriniveau:	Ja
Certificering:	CE
Håndsæt, type:	Trådløs håndsæt
Taletid:	7 t
Standby tid:	100 t
Højttalertelefon:	Ja
Antal melodier:	10
Telefonsvarer:	Ingen
Kapacitet for telefonbog:	50 entries
Nummervisning:	Ja
Monteringstype:	Skrivebord
Batteritype:	AAA
Maksimal indendørs rækkevidde:	50 m
Maksimal udendørsinterval:	300 m
Vækkeur:	Ja
Mikrofon mute:	Ja
Poster i opkaldslog:	10
Håndsæt dimensioner (BxDxH):	46 x 25 x 151 mm
Antal understøttede batterier:	2
Antal håndsæt inkluderet:	1
Samtaleanlæg:	Ja
Basisdimensioner:	90 x 47 x 85 mm
Vis antal farver:	Monokrom
Basestation:	Ja
Paging-funktion:	Ja
Antal håndsæt volumenniveauer:	5
RJ-11 stik:	Ja
Ældre telefon:	Ingen
Lydløs tilstand:	Ja
Antal ringetone-lydstyrkeniveauer:	5
Viderestilling:	Ja
Tastaturlås:	Ja
Automatisk advarsel om svigtende forbindelse:	Ja