Altronix NetWayXTX Manual


Læs nedenfor 📖 manual på dansk for Altronix NetWayXTX (4 sider) i kategorien Wifi repeater. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
NetWayXTX - 1 -
Overview:
Altronix NetWayXT and NetWayXTX (IEEE 802.3af (15W) compliant) (IEEE 802.3af (15W) and IEEE
802.3at (30W) compliant) repeater modules interface with NetWay midspans to extend data (video) for
an additional 100m. A maximum range of 600m for NetWayXT and even longer for NetWayXTX is
possible using multiple repeaters, based on camera/device port power requirement.
Features:
Rev. 042409
Installation Guide
NetWayXT/NetWayXTX
Repeater
Installation Instructions:
NetWayXT/NetWayXTX is not intended to be connected to outside plant leads.
1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole (Fig. 1a, pg. 1,
Fig. 2a, pg. 2). Use a proper fastener and/or wall anchor when securing NetWayXT to the wall.
2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay8M/NetWay16
or NetWay16M to port marked [IN] on the NetWayXT/NetWayXTX (Fig. 1b, pg. 1, Fig. 2b, pg. 2).
3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the PoE camera/
device or next NetWayXT/NetWayXTX repeater (Fig. 1b, pg. 1, Fig. 2b, pg. 2, Figs. 3-4, pg. 2 ).
4. Port status LEDs will illuminate on NetWayXT indicating the port is operational
.(Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1)
5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1).
Port LED definitions for NetWayXT repeater:
Status Green LED Yellow LED
OFF Indicates it is connected as 10Base-T or no link. Indicates no link.
ON Indicates it is connected as 100Base-TX. Indicates a link.
Blinking Indicates activity.---------------------------
NetWayXT
Fig. 1 Fig. 1a
Fig. 1a
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
CE approved.
Repeater module extends range 100m each.
Port status LEDs.
Compact insulated housing.
Plug-and-play installation.
Auto detection and protection of legacy non-
PoE cameras.
No external power required.
Compatible with NetWay1/NetWay8/
NetWay8M/NetWay16 and NetWay16M.
NetwayXT
Repeater
IN
OUTPower
Power
LED
Structured Cable from
NetWay1,
NetWay8, NetWay8M,
NetWay16, NetWay16M
or last NetWayXT
Structured
Cable to
PoE Camera/
Device or
next NetWayXT
Port Status
LEDs
www.altronix.com
I.T.E. 43KC


Produkt Specifikationer

Mærke: Altronix
Kategori: Wifi repeater
Model: NetWayXTX

Har du brug for hjælp?

Hvis du har brug for hjælp til Altronix NetWayXTX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Wifi repeater Altronix Manualer

Altronix

Altronix NetWayXTX Manual

29 August 2024

Wifi repeater Manualer

Nyeste Wifi repeater Manualer