Aluratek AHDDUB100 Manual

Aluratek Andet computertilbehør AHDDUB100

Læs nedenfor 📖 manual på dansk for Aluratek AHDDUB100 (1 sider) i kategorien Andet computertilbehør. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

236

SATA connector / dock slot

HDD release button

LEDs

Power switch

Power adapter port

USB port

Highlights and Application Operating Instructions

Getting Started:

To make a duplicate copy of your hard drive, please remove the hard drive from

your computer.

Please make sure the target/blank drive has the same or higher capacity than

your source hard drive. The duplication will not start if the target drive has

smaller capacity than the source drive.

It is recommended to use the same capacity blank/target hard drive as your

source drive because you are making an exact ghost copy of your original hard

drive. For example, if your original hard drive (source with data) is 80GB, the

duplicated/ghost copy will also be 80GB even if you use a higher capacity drive.

Warning: All data on the target drive will be erased.

External SATA Hard Drive Duplicator

Quick Start Guide AHDDUB100

Thank you for choosing Aluratek’s® External SATA Hard Drive Duplicator. In addition to

making sure only quality materials are used for manufacturing, Aluratek® is also

dedicated to provide the best customer satisfaction and support.

The goal of Aluratek is to embody in every product it designs, "Simple Elegance"

manufactures and sells.

The product focus of Aluratek is to bring simple yet elegant connectivity solutions to

the consumers to enhance their consumer electronics, communications and computing

experience. Each product is carefully designed with the consumer in mind. Each

product is solution-driven to address the need of the consumers and deliberately

planned to provide the ultimate user experience.

Read this guide thoroughly and follow the installation and operation procedures

carefully to prevent any damage to the unit and / or any of the devices it connects to.

Introduction

Duplicator Features:

• Create an exact duplicate copy of your sata hard drive

• Full System Backup - backs up all your operating system files

• One touch button backup - no need to connect to your computer

• Led Indicator light with duplication status

USB 2.0 Dual Docking Station Features:

• Works as a fully functional USB 2.0 External HD

• High speed data transfer rate of 480Mbps

• Ultra cool product design increases your drives life expectancy

• Transfer data between your computer and your SATA hard drive

• Supports all 2.5" and 3.5" SATA Hard Drives

• Plug-n-Play, Hot Swappable and Hot Pluggable

• Limited 1 year warranty

Requirements:

• Windows 2000, XP & Vista OR MAC 10.3 or later

• Available USB 2.0 port

Features and Requirements

Your order has been carefully packaged and inspected. The following should be included in your package. Please

inspect the contents of the package to ensure that you have received all items and that nothing has been damaged.

If you discover a problem, please contact us immediately for assistance.

Power Adapter

Package Contents

Radio and TV Interference Statement

If you need further assistance, please contact the Aluratek support department

for troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/support

Local (Irvine, CA): 949-419-6504

Toll free: 1-866-580-1978

Technical Support

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Aluratek warrants this product against defect in material or workmanship for 1 Year

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void"

sticker has been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE

PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING

SOFTWARE, OR IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with

respect to it's products, contents or use of this documentation and all accompanying

software, and specifically disclaims it's quality, performance, merchantability, or fitness for

any particular purpose. Aluratek reserves the right to revise or update it's product, software

or documentation without obligation to notify any individual or entity.

Use AHDDUB100 as a Duplicator:

Step 1: Insert the hard drive that you want to copy (the one with data) into the slot

labeled “Source”

Step 2: Insert the blank hard drive into the slot labeled “Target”

Step 3: Make sure the switch on AHDDUB100 is on “DUP”

Step 4: Connect the power adapter to AHDDUB100

Step 5: Press the “PWR” button to power on AHDDUB100

Step 6: Press the “START” button to start the duplication process

Step 7: The duplication process is completed when you see the status bar at 100%

Step 8: Press the “PWR” button to power off AHDDUB100 & remove the hard drives

Warranty

aluratek.com

Insert either a 2.5” or 3.5” hard drive

into the dock slot

Push the button to release the

HDD from the dock

Connect the USB cable to your

computer to transfer data

Quick Start Guide Warranty / Registration

Card

External SATA

HDD Duplicator

USB 2.0 Cable

Use AHDDUB100 as a Hard Drive Docking Station:

Step 1: Make sure the switch is on “JBOD”.

Step 2: Connect the USB Type-B connector to AHDDUB100

Step 3: Connect the USB Type-A connector to your computer

Step 4: Insert 1 or 2 drives into the slots

Step 5: Press the “PWR” button to power on AHDDUB100

Step 6: For drives that are formatted, you will see the drives in “My Computer”.

For non-formatted drives, you will need to go to “Disk Management” to

format the drive before you can access the drive.

Produkt Specifikationer

Mærke:	Aluratek
Kategori:	Andet computertilbehør
Model:	AHDDUB100

Har du brug for hjælp?

Hvis du har brug for hjælp til Aluratek AHDDUB100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Andet computertilbehør Aluratek Manualer

Aluratek AHDDUB100 Manual

6 August 2024

Andet computertilbehør Manualer

Nyeste Andet computertilbehør Manualer

SMK-Link VP3610 Manual

17 December 2024

Sharkoon SHARK XTend 16 Manual

17 December 2024

Sharkoon X-Rest PRO Manual

17 December 2024

Gembird NBS-D1-04 Manual

10 December 2024

Gabor LTS-50 Manual

10 December 2024

Dell Universal Dock UD22 Manual

8 December 2024

StarTech.com 129UE-USBC-KVM-DOCK Manual

7 December 2024

StarTech.com DK30CHHPD Manual

7 December 2024

IFM E12247 Manual

5 December 2024

Lenco IPT-223 Manual

13 Oktober 2024