Aluratek ASHBC01F Manual


Læs nedenfor 📖 manual på dansk for Aluratek ASHBC01F (1 sider) i kategorien Bewakingscamera. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Smart WiFi Outdoor Security Camera
Thank you for purchasing the Smart WiFi Outdoor Security Camera. We are
excited in being a part of making your life easier, safer and bringing peace
of mind into your homes.
What’s in the package?
1 Camera
6 Alkaline Batteries
1 User Manual
2 Screws
2 plastic Housing
Let’s Get Started!
(please refer to the numbered Parts Guide below)
1. Speaker
2. Microphone
3. Indicator light:
Smart configuration mode Quick Flashing Red Light:
AP mode, awaiting WiFiSlow Blinking Red Light:
Failed to connect networkFlashing Red and Green Light:
Connecting to WiFi Quick Flashing Green Light:
Operating modeSolid Green Light:
Internet connecting and bindingSlow Blinking Green Light:
Camera Network is abnormal Solid Red Light:
Updating FirmwareSolid Orange Light:
Power saving mode Light is off:
4. Light Sensor
5. Motion Sensor
6. Micro USB Port: To power the camera via USB
7. Alkaline Battery Box: Turn this part counter clockwise to insert the
alkaline batteries
8. Camera Base: The Package comes with 2 screws for wall mounting.
9. SD Slot
10. Reset Button
Install Alkaine Batteries into your Camera
1. Open the camera back cover.
2. Install the 6 pcs alkaline batteries into your Camera, Position
the negative pole in between the 2 positive poles of the alkaline
batteries. Follow this position on both opposite ends of the battery box.
Make sure you have the right
positioning of the battery
according to the correct polarity
as instructed.
Choose a good spot for your camera
Mount and position your Security Camera in a location with a clear, unblocked
field of view and good WiFi signal from the wireless router
Position your camera to optimize its field of view with your Security Camera. In
the following images, the green areas show your camera’s field of view, both
horizontally and vertically.
Mount your camera on an elevation of at least 7 feet above the floor or ground
area. Tilt and aim it slightly downwards for best motion sensor performance.
Motion Sensor on the Security Camera is more sensitive to a side-by-side
movement across its field-of-view than direct movements to and from the
camera. Motion detection is at best from 5ft-15ft from the cameras position.
WiFi Requirement
The smart home device only supports 2.4Ghz frequency. If your router supports
both the 2.4Ghz and 5Ghz frequency, the 5G network is usually labeled as
“Router-5G” so please connect to the other one.
- Each smart home device can only be registered to one account but it
can be shared with others by using the sharing function of the app.
1. Download the free eco4life app from the Apple App store or Google Play store
2. Follow the on screen instructions to create account for eco4life
3. Insert batteries into the Outdoor Security Camera
4. Press the “+” icon in the top right corner of the app
5. Press the “Battery camera” icon
from the list
Connect Device to Application
USER MANUAL
Model: ASHBC01F
6. Follow the instructions in the
app to connect the device


Produkt Specifikationer

Mærke: Aluratek
Kategori: Bewakingscamera
Model: ASHBC01F

Har du brug for hjælp?

Hvis du har brug for hjælp til Aluratek ASHBC01F stil et spørgsmål nedenfor, og andre brugere vil svare dig




Bewakingscamera Aluratek Manualer

Aluratek

Aluratek ASHBC01F Manual

6 August 2024

Bewakingscamera Manualer

Nyeste Bewakingscamera Manualer