Aluratek The Brick ABS01F Manual

Aluratek Vugge/dockingstation The Brick ABS01F

Læs nedenfor 📖 manual på dansk for Aluratek The Brick ABS01F (1 sider) i kategorien Vugge/dockingstation. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
1 2 3 4
5 6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
10
11
9
7
9
12
13
14
15
16
17
2
3
20
19
18
21
22
23 24
17
20
19
18
21
24
23
22
4
1
25
28
27
26
25
28
27
26
Package Contents Product Overview
iPod / iPhone / iTouch Playback
1. Connect the power cable to ABS01F.
2. Power on ABS01F.
3. Connect iPod / iPhone / iTouch into the iPod / iPhone / iTouch
connector on ABS01F.
4. Press the source button until you see “iPod” on the display.
5. Press the menu key on the remote to return to iPod / iPhone /
iTouch menu
6. Press the up / down key to navigate and press the Enter key
to select
7. Press play / pause key to play or pause the music
8. Press previous / next key to choose previous / next track
9. Press and hold previous / next key to fast forward / rewind the
current track
Note: While using iPhone with ABS01F, music will pause auto-
matically when there is a phone call. iPhone will ring thru
ABS01F. To pickup the call, disconnect iPhone from ABS01F or
use hand free on iPhone as a conference call. The sound will be
coming from the iPhone.
AUX Playback
1. Connect the power cable to ABS01F.
2. Connect the antenna to the antenna port in the back of the unit.
3. Power on ABS01F.
4. Select “FM” as the source by pressing the source key on the
remote.
5. Press previous/next key to adjust the radio frequency: press
once to move in 0.1MHz increment or press and hold for 3
seconds for auto scan/search
6. You can set the current station as a preset/favorite station by
pressing the select key. You can set up to max. 20 presets
7. To select the preset stations, press up/down key on the remote
Setting the Alarm
1. Connect the power cable to ABS01F.
2. Connect the 3.5mm audio cable from the AUX jack in the back
of ABS01F to the audio source such as MP3 player, CD
Player, and PC etc.
3. Select “AUX” as the source by pressing the source key on the
remote.
4. Playback control via the audio source
Your order has been carefully packaged and inspected. The following should be included in your package.
Please inspect the contents of the package to ensure that you have received all items and that nothing has
been damaged. If you discover a problem, please contact us immediately for assistance.
Radio and TV Interference Statement
Technical Support
Warranty
WARNING!!! This equipment has been tested and found to
comply with the limits of a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by whatever mea-
sures may be required to correct the interference.
iPod / iPhone / iTouch
Speaker Dock with built-in Amplifier
qsg Q10149 Copyright © 2010 Aluratek, Inc. All Rights Reserved.
aluratek.com
Quick Start Guide
ABS01F
BRICK iPod / iPhone / iTouch
Speaker Dock with built-in
Amplifier
Remote Control
• Power Cable
FM Antenna
Audio Cable
• Quick Start Guide
Registration / Warranty Card
1. Press the alarm key on the remote control to setup the alarm.
2. While “Alarm” is shown on the LCD, press volume up/down to
adjust the hour.
3. Press the alarm key again to adjust the minute using volume
up / down keys
4. When the speaker is in Standby status, press the source key
to choose the source of the alarm: buzzer or FM.
5. To active the alarm, press the alarm key again or no further
operation over 8 seconds.
Specifications
1. Press the time key on the remote control to adjust the clock
2. Press the volume up/down key to the desired hour while ‘hour”
digit is flashing
3. Press the time key again to adjust the minute
4. Press the volume up/down key to the desired minute while
“minute” digit is flashing
Note: To switch between 12/24 hours display, press and hold the
“Volume –“ key on ABS01F for 5 seconds during Standby mode.
Setting the Clock
To Snooze / Disable the alarm
1. To stop the alarm, press any key on the remote control.
ABS01F will stop and disable the alarm automatically if it is
not stopped after 30 minutes.
2. Press the Snooze key to snooze the alarm. The alarm will
resume in 9 minutes
Snooze timer
1. While ABS01F is playing, press the snooze key to set the
snooze timer for 15 minutes / 30 minutes / 45 minutes / 60
minutes / OFF mode
Snooze Function
FM Playback
Aluratek warrants this product against defect in material or
workmanship for 1 Year from the date of purchase.
This warranty becomes invalid if the factory-supplied serial
number or "warranty void" sticker has been removed or altered
on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any
part of the product.
C) Damage due to improper operation or maintenance,
connection to improper equipment, or attempted repair by
anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S
ACCOMPANYING SOFTWARE, OR IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed,
implied, or statutory, with respect to it's products, contents or
use of this documentation and all accompanying software, and
specifically disclaims it's quality, performance, merchantability,
or fitness for any particular purpose. Aluratek reserves the right
to revise or update it's product, software or documentation
without obligation to notify any individual or entity.
If you need further assistance, please contact the Aluratek support department for troubleshooting prior
to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
2.1 stereo
speaker
Inputs
Output
Input voltage
Dimensions
(W x D x H)
Weight
Subwoofer
Mid (left / right)
Treble (left / right)
iPod / iPhone / iTouch
connector AUX, 3.5 mm
Output: R / L Audio Out, 3.5mm
US and Canada
9.6 x 5.9 x 3 (in.)
243 x 150 x 75 (mm)
4 lbs. (1.8 kg)
88 mm, 4
34 mm, 6
21 mm, 8
110 - 120V AC 60 HZ
Standby
Volume down
Volume up
Source
LCD
Sensor
Treble speaker
Bass speaker
Mediant speaker
Power switch
Inverse sound hole
Power socket
Front
Underside
Back
Remote Control
Input socket
Audio output socket
Antenna
iPod / iPhone / iTouch
connector
Alarm
Snooze
Time
Tone
Backwards /
Previous
Down
Mute
Menu
Enter
Up
Forwards / Next
Play / Pause


Produkt Specifikationer

Mærke: Aluratek
Kategori: Vugge/dockingstation
Model: The Brick ABS01F

Har du brug for hjælp?

Hvis du har brug for hjælp til Aluratek The Brick ABS01F stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vugge/dockingstation Aluratek Manualer

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Denver

Denver BTL-350 Manual

5 Oktober 2024
Jam

Jam Thrill HX-P320 Manual

4 Oktober 2024
Pyle

Pyle PWPBT05BL Manual

4 Oktober 2024
Ewent

Ewent EW7018 Manual

4 Oktober 2024
Jam

Jam Splash Manual

4 Oktober 2024
Onkyo

Onkyo DSA5 Manual

3 Oktober 2024
SBS

SBS TEPIPERK Manual

2 Oktober 2024
Rapoo

Rapoo A500 Manual

2 Oktober 2024
Gembird

Gembird DD-U3M2 Manual

30 September 2024