AMT SS-11 Manual


Læs nedenfor 📖 manual på dansk for AMT SS-11 (4 sider) i kategorien Gitaarversterker. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
www.amtelectronics.com www.amtelectronics.com
1 1
SS-11
Guitar preamplifier
User’s manual
www.amtelectronics.com
Safety precautions.
CAUTION! High voltage! Danger! Even after the device has been switched
off the internal circuits might be alive with up to 500V
voltage. To avoid the electric shock DO NOT REMOVE
the bottom or top covers. The device does not contain
any user-serviceable parts. The preamp can be
repaired only by qualified personnel. Please disconnect
the device from mains if not in use.
WARNING! To avoid fire or electric shock do not let rain or water inside the device.
Do not place any liquid containing vessels on top of the device.
The icon means the presence of live and dangerous voltage
inside the device and the danger of electric shock.
This icon points out important information related to the
device operation and maintenance contained in enclosed
documentation.
Please read the instruction manual carefully.
1. Keep the manual at hand.
2. Pay attention to warnings.
3. Follow all operational instructions.
4. Use only dry cloth for device cleaning. Do not forget to switch
the device off.
5. Please do not block ventilation slots. When connecting the
device follow the instructions provided by the manufacturer.
6. Please do not place the device nearby heat sources, avoid
direct sunlight.
7. Do not step on the mains cable, avoid sharp angles etc. If the
mains plug or plug adapter of the device are used for
disconnection from mains, they are to be easily accessible.
8. Use only auxiliary devices and accessories recommended by
the manufacturer. Disconnect the device during thunderstorms
or when the device is not used for a long time.
9. Any work related to the device repair must be done by
qualified service personnel.
10. WARNING! All instructions related to the device servicing are
intended exclusively for qualified personnel. To avoid the
electric shock DO NOT fulfill repair works not described in the
instruction manual. All repairs must be done by qualified
personnel.
Contents
Important 1
Complete set 1
Introduction 2
Before you start 2
Specifications 2
Controls 3
Front panel 3
Only for qualified personnel 3
Tubes replacement 3
Connections 3
Block diagram 4
IMPORTANT!
If the device was transported or stored in cold environment it is necessary to
leave the device in its original packaging for at LEAST 2 hours before switching
it on!
Use only the cables specified for corresponding connections of the guitar
preamp to other devices.
Please, do not use other types of cables: e.g. speaker cables etc.
SWITCHING THE PREAMP ON:
Please switch the device on only after you have completed all audio
connections!
Before switching the preamp on make sure that the housing, the connection
cables and the power adapter mains plug are free from damages: cuts, cracks,
dents etc. and are intact.
To switch SS-11 first insert the power adapter low voltage jack into the
corresponding socket on the rear panel of the guitar preamp and then plug the
adapter into the wall outlet.
SWITCHING THE PREAMP OFF:
To switch the guitar preamp off first turn off the guitar amplifier used with
SS-11. Then disconnect the power adapter of the guitar preamp SS-11.
COMPLETE SET
The complete set includes:
1. Guitar preamp 1
2. Power adapter 1
3. Instruction manual 1
4. Packaging 1
5. Warranty card 1


Produkt Specifikationer

Mærke: AMT
Kategori: Gitaarversterker
Model: SS-11

Har du brug for hjælp?

Hvis du har brug for hjælp til AMT SS-11 stil et spørgsmål nedenfor, og andre brugere vil svare dig