AMX MVP-TCS-52-GW Manual

AMX Oplader til mobilenhed MVP-TCS-52-GW

Læs nedenfor 📖 manual på dansk for AMX MVP-TCS-52-GW (1 sider) i kategorien Oplader til mobilenhed. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Installation Guide

MVP-TCS-52 Table Charging Station

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

1/08

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-5966-02 REV: A

Overview

The MVP-TCS-52 Table Charging Station (FG5966-1X) is both a charging

station and a direct power connection for the MVP-5200i Modero ® Viewpoint®

Widescreen Touch Panel. The charging station is available in either white

(FG5966-11) or black (FG5966-10). For more information, please refer to the

Accessories section of the MVP-5200i Modero Viewpoint Widescreen Touch

Panel User Manual, available at www.amx.com.

Specifications

Powering the MVP-TCS-52

The MVP-TCS-52 uses a PS3.0 power supply to provide direct power for the

MVP panel both for standard function and for charging its internal battery.

1. Turn the device upside down and connect the terminal end of the PS3.0

power supply to the PWR connector on the bottom of the MVP-TCS-52.

2. To prevent wear on the power supply cord and assure that the device’s

base is in full contact with the table surface, press the cord into the locking

groove running across the bottom of the device (FIG. 2).

3. Provide power to the MVP-TCS by connecting the PS3.0 cord to an

external power source.

4. Place the touch panel in the Charging Station cradle (FIG. 3), guiding it into

place with the locking grooves on each side of the cradle (FIG. 4). When

fully seated, the touch panel’s charging station connector should be in

contact with the Charging Station’s charger pins.

Recharging

To recharge the MVP-5200i, slide the device into the Table Charging Station

cradle bottom-first and make sure the device is fully seated in the Charging

Station. The charger pins in the bottom of the cradle (FIG. 4) must be in contact

with the connector on the bottom of the MVP-5200i for it to start recharging. The

MVP panel will stop recharging automatically once the battery has achieved its

maximum charge.

Cleaning the MVP-TCS-52

You should clean the Table Charging Station after each day’s use to maintain the

device’s appearance. Always use a clean cotton cloth and a spray bottle

containing water or a vinegar-based cleaner, as alcohol-based cleaners can

damage the device. Do not directly spray the device: instead, spray the cloth to

prevent moisture from collecting on the charger pins. Do NOT use an abrasive of

any type to clean the Table Charging Station, as this may permanently damage

or remove the device’s finish.

FIG. 1 MVP-TCS-52 Table Charging Station (FG5966-10)

MVP-TCS-52 Specifications

Dimensions

(HWD): • 8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm)

Weight: • .65 lbs (.29 kg)

Rear Connector: • 12-pin charging connector on bottom of device cradle.

Operating/

Storage

Environments:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 20% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Included

Accessories

• MVP-TCS-52 Table Charging Station Installation Guide

(93-5966-02)

• PS3.0 Power Supply (FG423-30)

Other AMX

Equipment:

• MVP-5200i Modero Viewpoint Widescreen Touch Panel -

Gloss Black (FG5966-01)

• MVP-5200i Modero Viewpoint Widescreen Touch Panel -

Gloss White (FG5966-02)

• MVP-WCS-52: Wall Charging Station (FG5966-1X)

FIG. 2 Power source cable path for bottom of MVP-TCS-52

Power source cable path

Bottom of Charging Station

PWR connector location

Front of Charging Station

FIG. 3 MVP-TCS-52 - Front view with MVP-5200i

FIG. 4 MVP-TCS-52 - Rear view

MVP-5200i device

Table Charging

Charging Station

rear support

Station

Charger pins

Charging Station cradle

Locking groove

Produkt Specifikationer

Mærke:	AMX
Kategori:	Oplader til mobilenhed
Model:	MVP-TCS-52-GW

Har du brug for hjælp?

Hvis du har brug for hjælp til AMX MVP-TCS-52-GW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Oplader til mobilenhed AMX Manualer

AMX MVP-WDS-9 Manual

27 August 2024

AMX MVP-TDS-9 Manual

27 August 2024

AMX MVP-WCS-52-GW Manual

27 August 2024

AMX MIO-RCC-KIT Manual

27 August 2024

AMX MVP-TCS-52 Manual

27 August 2024

AMX MVP-TCS-52-GW Manual

27 August 2024

Oplader til mobilenhed Manualer

Nyeste Oplader til mobilenhed Manualer

Kogan KACGST3DQ2A Manual

19 December 2024

18 December 2024

18 December 2024

18 December 2024

18 December 2024

15 December 2024

NOCO Genius GX3626 Manual

14 December 2024

Aukey 18W Power Delivery Wall Charger Manual

14 December 2024

Aukey PA-B3 Manual

14 December 2024

Aukey PA-B4 Manual

14 December 2024